Używana 8 kolorów - fleksodrukarka z centralnym cylindrem : COMEXI FB 2108 GL 2003

Dane techniczne maszyny używanej COMEXI FB 2108 GL

Ref.: 300042635

Marka: COMEXI

Rok: 2003

Inne specyfikacje:

Drying with gas and hot water possible

Materials to be printed: Polyethylene, polypropylene, polyester films from 20 up to 300 my . Paper up to 120 gr/m2 and similar materials
Printing speed: up to 350 m/min, depending on the substrate, inks, etc
Porta Cliches Cantilever system
Sleeve shaft diameter: 105,158 mm
Plate thickness 1.14 and 2.54 mm and sticky back thickness 0.5mm

Turret unwinder and Turret rewinder
max roll diameter:
Unwinder: 800 mm.
Rewinder: 800 mm.
Inside mandrel diameter: 76 mm
Tension range: 20 - 350 N.

Additional equipment
AVT camera for print defect detection, barcode check (installed in 2014)
Automatic lateral register of all 8 colours (Adjustment: 20 mm.):
-Lateral web guide before printing, BST brand, by ultrasonic cell, motorised. Edge detection.
-Lateral web guide, BST brand, type OPG. Installed under the platform before the rewinder.
Viscosity testing and ink temperature control INELME model SICCT.Computerised system consisting of a control unit and the units of measurement.
Pneumatic ink feed pumps, with reversible fluid flow system.
Automatic device for individual or simultaneous cleaning of colours. Automatic inking unit cleaning

Banana roller before rewinder
Driven knife system before rewinder
8 additional chambered doctor blades with tensioning system
Roller lift for winding and unwinding
Chiller for web cooling before rewinder

Gas Drying System
Equipped with two gas burners
Hot air for drying

Hot Water Drying System Includes Hot water heat exchanger
Equipped with two hot water radiators at 70° - 80° C.
Power: 150.000 kcal/ h for drying between printing units.
170,000 kcal/h for drying in the tunnel.
Excludes: boiler, temperature regulator and regulation and control valves.

Drying Tunnel:
One supply-suction fan: 8500 m3/h at 120º C. Drying length 4,125 m
12 drying screens between printing units with 2 blowing lips.
With air recirculation system.

Electrical installation: Explosion-proof

Ethernet connection for data exchange between the machine computer and the office computer.

64 sleeves
16 INOMETA carbon fibre intermediate sleeves

Ceramic anilox rollers x 21
Outer-Ø: 152.78mm
Inner-Ø: 127.44mm Total length: 1340mm

l/cm - cm3/m2- date- manufacturer
140-9.7-07.02.2003-Praxair
140-10-07.02.2003-Praxair
320-5.2-05.03.2003-Praxair
320-5.5-07.03.2003-Praxair
320-5.3-04.03.2003-Praxair
3204.508.08.2003-Praxair
180-13.7-10.03.2003-Praxair
180-11.7-14.03.2003-Praxair
100-13-05.06.2003-Praxair
100-14.5-06.06.2003-Praxair
320-5.3-27.10.2006-Praxair
340-5.3-27.06.2008-Praxair
140-10-17.06.2008-Praxair
220-9-21.01.2010-Praxair
200-10.6-21.01.2010-Praxair
140-11-21.01.2010-Praxair
320-5.2-21.01.2010-Praxair
100-14.9-07.05.2012-Praxair
340-5.4-13.05.2014-Praxair
140-10.3-17.12.2018-TLS
100-15-17.12.2018-TLS