Used TEREKAS Flex Blow 4 of 2016 for sale

PET stretch blowing machine TEREKAS FlexBlow1 construction year 2016 1 Cavity Operating capacity: 20.2 million bottles Product-specific parts for the following threads: 24/ 410 25 mm snap-on 28/ 410 28 mm ROPP 38SP400 38 mm 2-start 38 mm 3-start 53SP400 Including Hopper Tipper Preform loader The machine will be in production till mid of September 2025 In very good conditions

Blower for PET bottles FlexBlow FB4 from 2010 Capacity hasta 6.000 bph (250ml) Round and square PET bottles (125, 250, 750 ml), HDPE cap 4 cavities. Mold for 250 ml bottle included. There are other molds for extra price. Includes: - dumper - preform feeder - a line of pneumatic bottle conveyors - manuals ~6.500.000 cycles Available immediately

Terekas FlexBlow 4 Standard All Electric stretch blow molding system, November 2020 Output: 6000 bph Neck: 20/410, 24/410, 28/410, PCO1881 (or larger too) With neck orientation Machine to be sold alone or ideally with a simiilar second Terekas FB4, year 2020 (ref. 300047412), in a pack including: - Terekas FB4 blower May 20 (without neck orientation), ref. 300047412 - Terekas FB4 blower Nov 20 (with neck orientation), ref. 300047415 - Preform molds: 12 cavities (24/410, 30g), 16 cavities (24/410 & 8/14/20/30g, 20/410 & 5/10/14/14g)) - Blowing molds - Raw preforms (worth 95.000 EUR) - Set of backplates for ultra-fast mold change - Dumper, preform feeder - Manuals & spare parts (spare lamps, drawing rods) - Air recovery & energy saving system - Preferential heating for oval containers: - Burst detection system - Booster 7.5kW, with dryer and air tank 40b It does NOT include the chiller. Hours worked: <5.000. Open to price proposals. Still in production and available immediately

Terekas FlexBlow 4 Standard All Electric Stretch Blow Molding Systems, May 2020 Output: 6000 bph per machine Neck: 20/410, 24/410, 28/410, PCO1881 (or larger too) Machine to be sold alone or ideally with a simiilar second Terekas FB4, year 2020 (ref. 300047415), in a pack including: - Terekas FB4 blower May 20 - Terekas FB4 blower Nov 20 (with neck orientation), ref. 300047415 - Preform molds: 12 cavities (24/410, 30g), 16 cavities (24/410 & 8/14/20/30g, 20/410 & 5/10/14/14g)) - Blowing molds - Raw preforms (worth 95.000 EUR) - Set of backplates for ultra-fast mold change - Dumper, preform feeder - Manuals & spare parts (spare lamps, drawing rods) - Air recovery & energy saving system - Preferential heating for oval containers: - Burst detection system - Booster 7.5kW, with dryer and air tank It does NOT include the chiller. Hours worked: <5.000. Open to price proposals. Still in production and available immediately

Terekas- FB2-3 PET Reheat  - 2020 Cavities- 1-3 Output- 3,400 bottles per hour Preferential heating Includes: -Preform dumper – Preform hopper elevator – Preform feed rails – Change parts for 24 mm 410 and 28 mm 410 neck finishes – Airveyor takeout system  3 cavity molds to make the following bottles: 4 ounce Boston rounds, 4 ounce cylinders, 4 ounce, bullets, 8 ounce Boston rounds, 8 ounce cylinders, 8 ounce bullets, 16 ounce Boston rounds, 16 ounce cylinders, 16 ounce bullets, and 5 ounce oblong flask – Air cooled chiller – Low Pressure and Hig pressure Air Compressors with 2 Air Reservoirs Excellent Condition- machine produced approximately 500,000 bottles