Used Independent Rewind Stations Film Slitter-Rewinder: LAEM TR 550.10.M of 2001

Data Sheet of Used LAEM TR 550.10.M

Ref.: 300040543

Brand: LAEM

Year: 2001

---

Other Specifications:

The slitting and rewinding machine can rewind vacuum metallized materials like 15-60 µm OPP and 12-40 µm PET
Web tension range: 7-30 daN Web path: overhead The idle rollers are covered with: Special grey rubber LHPA

Unwinder parameters
Maximum unwind reel weight: 1500 kg
Maximum unwind reel chucking (min.reel width): 500 mm
Unwinding roll pick-up from pallets on floor: Minimum diameter 400mm
Blunt cone chucks for cores of: Inside diameter 3” and 6”

‘FIFE’ web guide system with optic web Edge sensor, moving the unwind stand sideways, stroke: ± 75mm


Web tension nip unit. It consists of a chrome plated steel roller which is driven by a d.c. motor and by a rubber-covered nip roller (65 Shore rubber hardness) which is peumatically actuated. The lead motor drives, via power transmission belts, also the spreader roller, the slitting backup roll, and two rewinding pull units.

Tendency driven (by belt system) rollers on the overhead web path.

Bowed spreader with fixed bow (curve). Planetary adjustment of the arc, via selector switch, allowing to set the desired bow for the web.


Rewinding section
Double rewinding stations : 4 pcs,
Max. reel diameter : 1000mm,
Max. width : 1600mm (two driven levers)


Slitting assembly
Razor blade slitting system, by: Helios, model E2-40
Number of slitting heads: 5
Grooved counterroller, 2 mm pitch: 1 mm groove + 1 mm ring