Rotor Diameter: 600 mm
Output Capacity: 900 kg/h
Input Throat (Width): 1488 mm
Input Throat (Height): 720 mm
Rotor Length: 1450 mm
Number Of Bed Knives: 2
Number Of Blades: 5
Screen Size: 20 mm
Can be used for hard, brittle and tough plastics.
Discharge – directly to friction washer
Crushing of pre-crushed industrial film waste. Wall thickness from 8 to 150 microns, mainly thin-walled foam.
Materials such as stones, metals, rubber, wood, glass, etc. that can damage the crusher are sorted by the customer before being fed into the line.
No feeding belt.
Constructed to be loaded by a belt conveyor, stable welded structure made of finned steel, with protective curtains to prevent backflow of material.
Both fixed blades are mounted oppositely within the dividing support surface.
Hydraulic device for automatic opening and closing of the upper mouth
Protection against wear and tear
Crusher rotor design: open knife rotor, no thread in the rotor, fixing of the knife by means of hexagonal bolts and clamping strips.
Change of blades by means of a pulse screwdriver
All knives are made of Ch-Ni tool steel.
Rotor supports: Self-aligning roller bearings mounted outside the crushing chamber.
Knives can be installed and adjusted outside the machine in the supplied mounting device.
Scrren replaceable, tool-free mesh change, quick access to the crushing chamber
All electrical elements are installed in a rigid sheet steel cabinet. The connection diagram is made as an automatic sensor control; control of buttons with light indicators, main switch closes, terminals connected by wires, including safety elements.
The design complies with the current safety regulations of the Association of German Electrical Engineers.
The machine is stored indoors. The photos were taken outside for ease of taking pictures.
Guarantee: Without guarantee
Current condition: Not running. Can be shown with material
Voltage: 400 V Triphase
Frequency: 50 Hz
Voltage: 230 Kw