Used Dosing and metering equipment

1 gravimetric mixer EnginPlast - has worked 100 hours only. It was installed above an extruder. 3 components 500kg/h There is a granule dispenser and 2 powder dispensers. The weight percentages of each material can vary between 0 and 100%. Application: CDM full screw extruders - output 1200 kg/h (dosing in the customer's extraction screw) Components and dosing: 1) 70-100 % PP ground (DA 0,35 kg/dmc) 2) 5-30 % CaCo3 powder (DA 1 kg/dmc) 3) 1-10 % master granulate (DA 0,775 kg/dmc) 1.GRAVIMETRIC DOSING UNIT TYPE DG1SP 35/100 : 2.GRAVIMETRIC DOSER TYPE DG1SP2V 35/100 : 3.15/50/V150 TYPE GRAVIMETRIC DOSER composed of : Gravimetric feeder AG 150, composed of a loading hopper, capacity 40 dmc, made of stainless steel, equipped with electro-pneumatic butterfly discharge valve, a stainless steel weighing tank capacity 20 dmc, mounted on a flexural loading cell. Supporting structure in painted carbon steel. Extraction dosing unit with body in aluminium casting, screw holder tube in calibrated steel, dosing screw in chromium plated steel, gear motor with AC drive motor 0.18 kW, controlled by digital frequency converter (inverter).

- Type : Hopper Loader (x3) - 24V power supply - Power 0.011kW They can be used with individual turbines or with centralized suction. Available immediately, not visible in production

Blender WSB 140T + Moretto feeding system

DEGA mixing system complete with two tanks for mixing virgin plastic material and master with suction and differentiated feeding system (used only for testing)

2 x Stand-alone Vacuum Receivers for connection into existing Sequencer Control Unit: Vacuum receiver consisting of: - Large size Reservoir Hopper 1 x Pinch valve situated on bottom of Receiver - Vacuum loading heads with integral blowback 1 x. Daybin Level Sensor 2-component V-manifold configuration for vacuum return line Central dust collection filter with inversion valve TSM pump contactor box Athmosphere/Vacuurn breaker valve 3 x 4-component Sigmabatcli blender with Extrusion Control and integrated Vacuum Loading: Standard Sigmabatch blender consisting of: Biege colour (Standard RAL 7032) One load cell mounted "gain in weight" hopper Mixing chamber with patented mixer Standard 'CL' extruder mounting flange Neck Drain Sampling shute and Screw Cap Operator Control console including: 16x40 Backlit Liquid Crystal Display 20 Character membrane Keyboard 7 Metres of cable for remote mounting 37.5mm slide valve insert on 3rd component 50mm slide valve insert on 4th component 1 hroughput of up to 600Kg/H 7.0 Kg Nominal Batch size 4 Top Mount Slide Valves No Side Mount Screw Feeders Packing Standard Reservoir hopper mounting flange Additional Extruder Flange Adaptor Optional Features available: Integrated Extrusion Control consisting of : Control Software allowing Kg/Hr Setpoint Entry Extruder Drive Interface electronics Control Accuracy of 4/- 0.5% Blender to Extruder Control Cabinet cable (5M) Weight per Lenghth Control consisting of: Control Software allowing g/m Setpoint Entry Shaft Encoder for Linespeed feedback Shaft encoder to Extruder card Junction box Encoder to junction box cable (5M) Junction box to Extruder card cable (5M) Change on Fly' Facility Allows operator to keep line up while changing from one order to the next. Consists of: - Non-Return Ball pneumatic valve with electrics - Reservoir Hopper connector - Blender throat connector - 2 Metres of 50mm Flexible pipe - Interface Software Integrated Vacuum System: Additional cost of vacuum receiver if purchased instead of standard reservoir hoppers Sequence control panel consisting of: 16x40 Backlit Liquid Crystal Display 20 Character membrane Keyboard Control of up to 30 Vacuum receivers Can control two separate vacuum groups 4-component manifold configuration straight for vacuum return line ISM pump contactor box Athmosphere/Vacuum breaker valve There is no vacuumpump included in the system Everything is on pallets today but was working fine before they changed the system.