Please accept marketing-cookies to watch this video.

BOBST CL 750D 2017 技术参数

复膜车间 BOBST

二手 BOBST CL 750D 技术参数

联系我们 : 300042876

生产年份: 2017


状态: 待售

交货时间: 现货


层压机类型:Solvent and Solventless

工作宽度: 1325 mm


开卷直径: 1020 mm

复卷机直径: 1020 mm

干燥系统:Oil burner

机械速度: 450 m/min




Set for solvent based solvent less and water based adhesives coating system.
-Rotogravure including cold seal coating in register on pre-printed material.
-Flexo (five rolls system) and solventless bicomponent mixer from VEA

The total production hours hasn’t reach 15000 hours yet

Mechanical speed max 450 m/min
Web width min- max : 400-1350 mm
Coating width max : 1325 mm
Heating indirect by thermal oil with detecting/control of solvent concentration
Idle rollers made of special anti-corrosion aluminum alloy

Materials :
Primary unwinder
BOPP min 12 µm, max 50 µm
PET min 12 µm, max 50 µm
OPA min 15 µm, max 50 µm
PE min 30 µm, max 200 µm
NYLON CAST min 30 µm, max 80 µm
CPP min 60 µm, max 150 µm
Aluminium min 7 µm, max 20 µm
Paper/Laminates min 40 g/m2, max 80 g/m2

Secondary unwinder
BOPP min 12 µm, max 50 µm
PET min 12 µm, max 50 µm
PE min 20 µm, max 150 µm
CPP min 20 µm, max 150 µm
NYLON CAST min 20 µm, max 80 µm
Aluminium min 7 µm, max 20 µm
Paper/laminates min 40 g/m2, max 80 g/m2

Rewinder : Laminates max 250 g/m2

Simplex primary & secondary unwinder and Rewinder motorized drum with web edge sensor, shaftless type, bidirectional, Unwinders diameter 1020mm - max reel weight 1000 kg and dancer roll Safety check for reel locking.

Bonding section composed of lamination pressure roller antistatic against heated stainless steel drum (equipped with 1 heating unit from Frigo, controllable temperature) and 1 cooling drum.

Drying tunnel:
Flat web passage, 2 ventilation chambers each with a length of 3 m, for a total of 6 m. It opens from the bottom side.

Corona treater:
Primary unwinder integrated corona treater from MERO, control through screen: reading and parameters setting. The corona unit is suitable for conductive and non-conductive materials.

Coating unit:
Sleeve type pressure roller,
Solvent/fumes captured by fan and exhaust duct from the tie rod of the coating unit and through movable hoods.

A- Trolley for rotogravure coating with Doctor blade and sleeve coating cylinder:
- finished of turning (not engraved)
- 1 sleeve/cylinder holder shaft complete with cones and bushings according to sleeve Bobst standard design.

B- Solventless trolley equipped with software for the speed curve of machine:
The supply includes a solvent-less trolley composed of:
*1 solventless coating cylinder made of chromium-plated steel
*2 metering cylinders made of chromium plated steel
2 heating units Frigo circulated by water:
1 for metering cylinders
1 for coating cylinder
*1 rubber-covered transfer cylinder, sleeve type.

Equipment for cold seal coating (register From Bobst, model Registron S5100 + INKING SYSTEM sleeve/cylinder holder shaft complete with cones and bushings)
The equipment of cold-seal is different from the rotogravure equipment.

Electric panels:
1 touch screen for each primary and secondary unwinders, rewinder and coating unit.
1 main control panel, with one touch screen 22”
AC vector drives & motors and PLC by SIEMENS.

Availability of spare parts and sleeves total of 33 rubber sleeves.
Instruction book and manuals for auxiliary equipment and machine drawings are available.


保修: 无保修

运作情况: 生产状态

可供状态: 现货




Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
+34 983 549 900
查看我们其他的办公室 »