Machine Sold

Used Coextrusion lines: KOLSITE KET-33460 of 2012


Search used machines

Similar Products:

Coextrusion lines - KOLSITE - KET-33460

Data Sheet of Used KOLSITE KET-33460

Ref.: 300043323

Brand: KOLSITE

Year: 2012


    Other Specifications:


    2100 mm layflat 3-layer IBC Blown Film Line. Kolsite. 25-200 micron, 1:2:1.
    2 x 60 mm 30:1 Extruder, 55 kW AC drive. 4-zone 12.8 kW ceramic heaters & blowers.
    1 x 75 mm 30:1 Extruder, 90 kW AC drive. 5-zone ceramic heaters & blowers.
    Each extruder has a barrier screw,vacuum Hopper Loader, Melt pressure Transducer, Screen changer.
    500mm Die Diameter with 2.2 mm lip Die. 40 kW heaters in 8-zones.
    Air ring with orifices. 25 HP air blower driven by AC drive, differential Pressure Gauge & Heat exchanger.
    IBC with 5-orifice and 3 x non-contact Ultrasonic Diameter Sensors, 1x auto thermal compensatory sensor, proportional diaphragm butterfly Valve.
    2x air blowers for inlet & exhaust and heat exchangers, each with 20 HP AC drive.
    800~1400 mm diameter motorized Bubble Cage with Teflon beads.
    Motorized Collapsing Board with Teflon Bushes.
    Take-off unit of 2200 mm water cooled Nip unit, 2 HP AC drive.
    360 degrees Oscillating Haul-off with Turn bars with locking & air floating arrangement, 5 HP high pressure Air Blower.
    Pneumo-hydraulic Center & Side-Trim slitting unit.
    Web aligner
    1000 mm diameter fully auto 2-stations auto splicing & roll change-over Surface Winder, each with 2 HP vector controlled AC drive, expanding shafts x 4 . Air shafts, Roll unloading.
    Auto Web Tension control & Taper tension control with load cells.
    Control Panel with 29 zones PID Temp. controllers and AC drives.
    PLC control for Osc. Take-up & auto Winder.
    2 sets Synchronized Master Drives viz., Plant master for all extruder drives + take-up Nip + Winder Nip + Winder Drum.
    Line-speed Master for Take-up Nip, Winder Nip & Winder Drum.
    Max 120 m/min.