Used Blown film extrusion machines

Film Thickness: 0.03 to 0.12mm 3 layer structure: A/BC Extruder: A-60mm dia, 30L/D, B-80mm dia, 30L/D, C-60mm dia, 30L/D Max. machine speed: 80m/min Feeding system: Stainless steel Hopper with spout (feeding capacity 80L) Screen changer Diam of die: 300 & 350mm, gap of die lip: 2.2mm IBC (ultrasonic closed-loop control system) JM automatic counter flow air ring and Kundig thickness measuring system Bubble cage Collapsing frame First haul-off unit Reversing haul-off unit Web guide unit - BST WSD-lll-1700 fully automatic double station (back to back) winder Reel dia 800mm Tower Corona treater Sanxin In-line edge trimming recycling system from Hengnuo Available in November 2024

Die size : 100mm Die gap : 1.5mm Mechanical speed : 55kg/h for 650mm film width at 50mic Min/max width : 250mm-900mm Max width which can pass on winder : 650mm flat, 900mm gusseted Thickness range : 16 - 110mic Cooling air temp : depends on air supply Cooling ring type : single lip No tower included

Coextrusion line for the production of stretchfilm Typical output for stretch tube - 350kg/h (max. 450kg/h for non-stretch tube) 60/90/60mm diameter screws Die gap (mm): 1,2 and 2,0 and 2,8 Die diameter: 280mm Thickness Range (µm]: 40-150 Air ring with IBC Gusset (Max): 150 - 450mm Kundig thickness control system Gravimetric dosing unit: Nr of components: 6 (1+5)in the outer layer and 4(1+3) in the middle layer AFS Corona treatment (outside) Winder core diameter shafts 76,152mm Winding roll diameter (mm): max. 1200 Manzoni Stack printing unit with 6 (3+3) printing stations, 2005 year Max. printing width 1400 Additional equipment to be negotiated: Micro perforation  Electronic retrofit KIT from WH in value of 100K euros was purchased and can be acquire for lower price with the machine (e.g. to update electronics to latest version of Siemens)

Water-quench 3 Layer blown film extrusion line turned up-side-down for production of Films (ex. Medical) of PP/TPP/PP Layer Structure: A - B - C H-PP /T-PP/H-PP 20-25 % / 50-60 % / 20-25 % Extruder capacity K 105 - 30 D: max.250 kg/h PP K 60 - 24 D: max. 100 kg/h PP Output is depending on raw materials, layer structures, as well as on film width and -thickness Width tolerances: +2 / -0 mm Disk calibrator and cooler for connection to water chiller Rotating Haul off Web Edge control Automatic Turret Winder to wind up the film tube winding speed 100 m/min. max. winding shaft for cores with 6 inches Inner-diameter max. winding diameter* 800 mm mm max. film width* 700 mm *maximum diameter/width only with 6“ cores Raw material feeding- and Dosing unit consisting of: 1 gravimetric dosing unit, 3 components, incl. suction feeder for Extruder B 2 gravimetric weighing hopper, incl. suction feeder for Extruder A and C 1 central filter with suction blower Thickness measuring device with capacitive sensor Automatic thickness regulation via cooling ring Unit for Multiple-up slitting up to 4 up's and edge trim 1 Annealing Unit for heat setting of the film Some Spares available Control Siemens S7 with profibus disc

Blown film extrusion plant for 3-layer FFS film Extruders 60/70/60.30 D PIOVAN MDW gravimetric dosing units with 6 stations each dosing unit divided 3 raw materials (large) and 3 additives (smaller) Type B 160 / 250 - 3 - P2 head with 180 mm die plate, 1.8 mm gap Modular cooler for inner and outer bubble air Calibrating device for working width from 200 to 800 mm double plate Automatic thickness control system Rotating haul off FILMATIC K automatic single reel winder Reel diameter: max. mm 1500 Modular automation optifil - plus -capacitive thickness measurement - width measurement and adjustment - gravimetric flow rate adjustment Film thickness (LDPE, LLDPE) mm 0.020-0.250 (HDPE) mm 0.008-0.100 Tower, printing press and embosser not included