Machine Sold

Used Injection moulding moulds: HOME MADE Complete Plant for small home electric appliances of


Search used machines

Similar Products:

Injection moulding moulds - HOME MADE - Complete Plant for small home electric appliances

Data Sheet of Used HOME MADE Complete Plant for small home electric appliances

Ref.: 300043703

Brand: HOME MADE


    Other Specifications:

    Moulds for the production of small home electric appliancesduction.
    Most Molds are made/designed in Italy, steel impax

    -Molds corresponds to Juicers models (V2001/3001/4001)
    must be sold together since have some parts in common like axle dented wheels Cones Cups etc

    -Needed machines: from 80ton up to 450ton.

    Complete plant for the production of small, home electric appliances.

    Moulds for the production of small home electric appliances.

    Most Molds are made/designed in Italy, steel impax

    Included stock of material (motors, switches etc) which accompany the molds for the assembling of items
    Whole package which includes all models (molds) as shown in photos and all materials in stock

    The package includes the machines which are necessary for the assembling as follows:

    1 Áir Compressor TOROS 500 L Three-Phase,
    1 AMP FASTON TERMINAL 6,3m Press,
    1 BRANSON ULTRA SONIC plastics soldering machine,
    1 Hydraulic press,
    1 Automatic Screwing Machine for Juicers,
    1 Small Press for fixing the pinion to the Juices motor+ Grease dispenser
    1 Control Panel + Hight Voltage Tester Automatic GO-NOT GO, Brand EDC MILANO
    1 EUBANKS Cutting and spelling cables machine,
    1 Selial No. numerator
    1 Conveyor Belt for Assembling 10 meters
    1 Control Panel w Digital Stroboscope
    3 Air screwdriver
    3 Base drills.

    Molds for the production of various parts of the final product:

    Product: Fan Heater; Various spare parts(motors etc) available, included in the price.
    Molds:

    -MOLD 1 CAVITY FOR UPPER BODY
    Material: ABS;
    Dimensions(mm): L 392 W 378 H 487

    -MOLD 1 CAVITY FOR LOWER BODY
    Material: ABS
    Dimensions: L 393 W 345 H 440

    -MOLD 1 CAVITY FOR GRILL
    Material:PA6 55/45
    Dimensions: L 364 W 290 H 438

    -MOLD 2 CAVITIES FOR REFLECTION FOOT
    Material: ABS
    Dimensions: L200 W 190 H 360

    -MOLD 1 CAVITY FOR FAN
    Material: ABS
    Dimensions: L 317 D=275

    -MOLD 4 CAVITIES (2+2) FOR 2 SWITCH KNOBS
    Material: ABS
    Dimensions: L200 W 200 H 230 AND 2 THERMOSTAT KNOBS ABS

    Product: Hand Blender V1100

    -MOLD 1+1 CAVITIES FOR BODY SET
    Material: ABS
    Dimensions: L 582 W 493 H 636

    -MOLD 2+2 CAVITIES FOR 2 DECORATIVES & 2 SWITCH KNOBS
    Material: ABS
    Dimensions: L190 W 298 H 235

    -MOLD 2+2 CAVITIES FOR 2 UPPER BODY COVER & 2 WASHERS
    Material:ABS
    Dimensions: L 257 W 253 H 280 ( FOR STABILITY OF COMPONENTS )

    -MOLD 2+2 CAVITIES FOR 2 ACTUATION CONJUCTOR (PA6) & 2 BASES BEARING (PA6)

    -MOLD 2 CAVITIES FOR WALLMOUNT
    Material: ABS
    Dimensions: L 260 W 295 H 295

    -MOLD 2 CAVITIES FOR CONTEINER
    Material: SAN
    Dimensions: 437 D=317

    PRODUCT: HOT PLATE v100

    -PRESS MOLD FOR 1 UPPER BODY SteelMetal Decap 0.8 mm
    Material: Steel Metal

    -SHAPING MOLD FOR UPPER BODY Steel Metal Decap 0.8mm
    Material: Steel metal

    -MOLD 1 CAVITY FOR LOWER BODY PA66 55/45
    Material: PA66 55/45
    Dimensions: L 225 D=265

    -MOLD 3 CAVITIES FOR CORD FASTENER PA66 55/45
    Material: PA66 55/45
    Dimensions: L 155 D=225

    *THE PRODUCTION OF UPPER BODY (MOLDS 1&2) IS DONE IN A HYDRAULIC PRESS

    PRODUCT: HAND MIXER V1001

    -MOLD 1+1 CAVITIES FOR BODY SET
    Material: ABS
    Dimensions: L 328 W 395 H520

    -MOLD 2+2 CAVITIES FOR 2 HOUSING PLATES + 2 FREEWHEEL SHAFT
    Material: ABS
    Dimensions: L 170 W 198 H 245

    -MOLD 2 CAVITIES FOR SPRING OF FREEWHEEL
    Material: POCAN
    Dimensions: L 210 W 220 H 200

    PRODUCT: JUICER V3001 0.5-1.0 lt

    -MOLD 1+1 CAVITIES FOR BODY SET V 3001
    Material: ABS
    Dimensions: L 330 W 347 H 423

    -MOLD 2 CAVITIES FOR RATING PLATE V 3001
    Material: ABS
    Dimensions: L 210 W 235 H 275

    PRODUCT: JUICER V2001 0.5lt

    1) MOLD 1+1 CAVITIES FOR BODY SET V 2001
    Material: ABS
    Dimensions: L 315 W 300 H 424

    2) MOLD 1 CAVITY FOR SQUEEZING CONE
    Material: ABS
    Dimensions: 383 D=255

    3) MOLD 1 CAVITY FOR CUP 0.5 L
    Material: SAN
    Dimensions: L 364 W 290 H 395

    4) MOLD 2 CAVITIES FOR RATING PLATE V2001
    Material: ABS
    Dimensions: L 200 W 224 H 285

    5) MOLD 4 CAVITIES FOR SQUEEZING AXLE
    Material: PA6
    Dimensions: L 345 W 245 H 250

    6) MOLD 1+1 CAVITIES FOR DRAGGING & INTERMADIATE DENTED WHEEL
    Material: POM
    Dimensions: L 250 W 244 H 344

    7) MOLD 12 CAVITIES FOR SUPPORTING FEET
    Material: PVC
    Dimensions: L 153 W 175 H 200

    8) MOLD 1 CAVITY FOR CUP 1 L
    Material: SAN
    Dimensions: L 350 W 395 H 495

    9) MOLD 4 CAVITIES FOR SQUEEZING CONE ADDITION
    Material: ABS
    Dimensions: L 220 W 145 H 145

    THE PARTS 2, 3, 8, 9 ARE THE SAME FOR MODELS V2001 AND V3001 0.5 L OR 1.0 L
    THE PARTS 5, 6, 7 ARE THE SAME FOR MODELS V2001, V3001 0.5L 1.0L, V4000(THREE MODELS)

    PRODUCT: JUICER V4000
    -MOLD 1 CAVITY FOR LID V4000
    Material: ABS
    Dimensions: 315 D=270

    -MOLD 1 CAVITY FOR SQUEEZING CONE
    Material: ABS
    Dimensions: 397 D=300

    -MOLD 1 CAVITY FOR FILTER
    Material: ABS
    Dimensions: L 280 W 245 H 295

    -MOLD 1 CAVITY FOR JUG (CUP) 1 L
    Material: PP
    Dimensions: 448 D=328

    -MOLD 1 CAVITY FOR UPPER BODY
    Material: ABS

    -MOLD 1 CAVITY FOR LOWER BODY
    Material: ABS

    -MOLD 2 CAVITIES FOR RATING PLATE V4000
    Material: ABS
    Dimensions: L 195 W 230 H 240