Used EPS block moulding: IZOTERM IZOTERM of 2006

Data Sheet of Used IZOTERM IZOTERM

Ref.: 300044374

Brand: IZOTERM

Year: 2006

---

Other Specifications:

Foam block mould is used for pressing single foam grains into blocks by applying a temperature factor (water steam).

Block dimensions including allowance: 3060 mm x 1250 mm x 1050 mm (see photos)

Output capacity: 80 m3/h

Steam requirements:
p = 0, 6 Mpa
22 - 30 kg steam/cycle.

Compressed air requirement:
P min. - 0, Mpa.
80 l/min

PLC: Siemens.