Used INGERSOLLRAND PET STAR 210-3 of 2000 for sale

Technical Specifications:

• Air Pressure: 40 bar
• Delivery Rate: 690 m³/h
• Compressor Type: Piston
• Stages: 3

Other Specifications:

Ingersoll Rand IR AIR COMPRESSOR PET STAR 210-3 - year 2000
Includes:
1)HP-300 Ingersoll Rand DRYER:
-Compressed Air Dryer, Desiccant, ISO Class 2, 300 CFM, Dew Point (Deg. F) -40, For Air Comp. HP 75hp, 115 Voltage, 4.0 A Full Load Amps, 60 Hz, 1 Phase, Inlet Flow Capacity @ 100 PSI 300, Outlet Flow Capacity @ 100 PSI 255.0, 2 in Inlet/Outlet NPTF (In.), Max. Working Pressure (PSI) 150, Min. Working Pressure (PSI) 75, Max. Inlet Temp. (Deg. F) 120 Degrees F, Max. Ambient Temp. (F) 120 Degrees F, Pressure Drop 3 psi, 10 minute Cycle, - Timer, - Exhaust Muffler, Cleanable, Removable Diffuser

2)TWO 120G AIR TANKS

50HP HIGH PRESSURE AIR COMPRESSED SYSTEM SPECS:

PERFORMANCE & ENGINEERING DATA – PET*STAR PACKAGE

PET*Star Model............................................................................................................PS210-3
Site conditions
Inlet pressure to compressor, PSIA 14.5
Inlet air temperature, °F 95
Relative humidity, % 60
Cooling water temperature, °F 85
Compressor performance
Capacity, m³/hr (FAD).........................................................................................217
Capacity, ACFM (FAD)......................................................................................128
Discharge pressure, BAR / PSIG........................................................................40 / 580
Maximum operating pressure, BAR / PSIG.........................................................45 / 650
Operating speed, RPM........................................................................................690
Power required, measured at shaft, kW / BHP...............................................37.7 / 50.5
Number of stages / cylinders...............................................................................3 / 3
Motor data, typical
Power Rating, HP................................................................................................50
Service factor......................................................................................................1.15
Enclosure............................................................................................................ODP
Power supply, volts/phase/hertz..........................................................................460/3/60
Nominal motor efficiency, % at full load..............................................................94.1
Cooling requirements
Cooling water flow, GPM.....................................................................................19
Cooling water temperature rise, °F.....................................................................20
Inlet water pressure, PSIG..................................................................................35-75
Estimated water pressure drop, PSIG.................................................................15


SCOPE OF SUPPLY – PET*STAR PACKAGE

FRAME & AIREND
• 3-stage, double acting reciprocating air compressor, modified-‘V’ cylinder arrangement
• Non-lubricated compression chambers utilizing light alloy pistons and advanced composite ring material
• Heavy duty, fully water jacketed cast iron cylinders
• Chrome-plated hardened carbon steel piston rods
• Stainless steel inlet and discharge valves – plate design
• Cast iron frame with anti-friction, full floating, sleeve-type main bearings
• Extended distance pieces

LUBE SYSTEM
• Pressure lubricated bearings
• Crankshaft driven main oil pump
• Oil reservoir integral to frame with oil level indication
• Single 10 micron oil filter
• Oil level indicator
• Pressure relief valve
• SAE gasketed leak-free lube system piping

AIR SYSTEM
• Inlet air filter/silencer, dry type, 98% of 4 micron
• Intercoolers mounted with updraft separation chambers, ASME construction, pressure & temperature indication
• Aftercooler mounted with updraft separation chambers, ASME construction, pressure & temperature indication

DRIVE
• V-belt drive complete with OSHA belt guard
• 460/3/60 motor, 1800 RPM, 1.15 Service Factor, ODP enclosure with slide base

PACKAGE DESIGN
• Rigid fabricated steel baseplate with factory installed concrete ballast
• 83 dBA package sound level
• Single point connections for discharge air, inlet cooling water, discharge cooling water, condensate outlet and electrical service
• Stainless steel interconnecting air piping
• Sight flow indicators, thermostatic control valve, and solenoid shut-off valve for cooling water
• Automatic condensate drain located in the center with timed solenoid valve

CONTROL & ELECTRICAL SYSTEM
• Intellisys microprocessor based controller with two-step automatic pressure-based capacity control
• Provides current status for seventeen (17) key operating parameters
• Provides warning & alarm protection for seventeen (17) key operating parameters (pressures/temperatures)
• Full voltage main motor starter, mounted & wired
• NEMA 4 (IP-54) electrical enclosure

40000 hours and has been rebuilt before and is fully functional.

Other Details:

Guarantee: Without guarantee

Current condition: Disconnected. Can't be seen in running condition

Availability: Immediate

Voltage: 460 V Triphase
Frequency: 60 Hz

MachinePoint's services:

Loading and lashing

Packaging

Dismantling

Complete Plant Solutions

Refurbishing & Overhauling services

Used Machinery Appraisals

Transport of industrial machinery