Used MAGIC MG.L2-3ND of 1998 for sale

double head CD 150 mm new (included in the price) No ancillaries

Oleodynamic extrusion blow molding machine with one station with horizontal displacement. Stroke: 800 mm Configuration: Single-layer head with 3 exits at 250 mm between centers. Moog 300-point thickness regulation system with three independent channels. Blowing group with three independent cylinders driven by proportional valves. Mold closing with proportional control. Automatic deflashing and container extraction device to the conveyor belt. Control panel with microprocessor, leak tester, Rexroth hydraulic components. MAX. VOLUME. BLOW PACKAGING Cm3 15.000 CYCLE Sec. 3.5 CLOSING FORCE KN 200 OPENING STROKE mm 300 MAX. MOULD DIMENSIONS MOLD mm 800/2x155/490 ELECTR. ELECTR. TOTAL INSTALLED POWER KW 164 AVERAGE CONSUMPTION KW 80 INCLUDING: palletizer

Maximum blown container volume (cm3): 3000 Closing force (kN): 80 Dry cycle (sec): 1,8 Opening course (mm): 180 Max. mould dimensions (mm) (WxLxH): 400, 2x100, 345 Extruder: Power of electric motor (kW): 35 Heating zones (N°): 5 Heating power (kW): 11,2 Extrusion triple head: Max. die diameter (mm): 60 Heating power (kW): 15 Heating zones (N°): 14 Consumption: Average consumption (kW): 14 Air pressure blowing nozzle (bar): 6 ÷ 8 Air consumption (Nl/min): 600 Water pressure (bar): 3÷4 Water consumption (kcal/h): 14 000 Noise max. (dB(A)): 76 Price of delivery set includes: Standard elctro-pneumatic pick-&-place bottle unit Short side conveyor belt Equipment to load and dosing raw and regrinded material "Piovan" Grinder "Tria". 750 ml. mold (3 cavities) Two moulds to make the cap and cannula for the 750 ml. bottle. (To be made apart in an IMM.) The machine can produce both straight-neck and inclined-neck bottles.

Oleodynamic extrusion blow molding machine with horizontal displacement. Configuration: Single-layer head with 2 parisons at 340 mm. CD with view stripe Moog 300-point thickness regulation system with three independent channels. Blowing group with two independent cylinders driven by proportional valves. Mold closing with proportional control. Three-station automatic deflashing device with independent closing. Pitch 900 mm. Control panel with microprocessor, leak tester, Rexroth hydraulic components. CLAMPING FORCE KN 300 OPENING STROKE mm 500 DAYLIGHT mm 290 MAX. MOULD DIMENSIONS mm 915/2x155/475 ELECTR. ELECTR. TOTAL INSTALLED POWER KW 150 AVERAGE CONSUMPTION KW 70

Mould platen sizes (mm) W x H 500 X 460 Opening stroke (mm) 685 Deflashing unit YES NEW Omron PLC and screen