Used COMCO Proglide MSP of 2003 for sale

Materials: PET, BOPP, PP, paper and cardboard paper Maximum mechanical speed 201 m/min Double electric drying by 7KW three-phase banks in each station with original temperature control double SET POINT to choose when it is on or off. Flow controls (DAMPER) for injection and suction. FIFE guide. 15" WARNER electric brake. Material breakage sensor for automatic stop. Laminating unit. Feeding unit with rocker arm to maintain stable tension at material infeed to the stations. In-line die-cutting unit and STACKER table (conveyor belt) for labels. Turning unit to install between stations and reverse the material side. Second unwinder unit with pneumatic brake with proportional control for materials to be laminated. CANTILEVER double shaft rewinder unit. The units have sensors to monitor the status and position thanks to a central control with MITSUBISHI touch screen. BST video system. Doctor blade (ink chamber and clamps, HARPER ceramic rollers). OPALTONE or CMYK system (4 inks + 3 COLORS) for 7 stations available or optional 8 colors. Can laminate in line with cold lamination or with hot roller on station 8. Peripheral equipment: Chiller Compressor 15 hp with dryer (Optional). Drying oven and UV lamp Hotmelt applicator Thermal to heat the lamination unit. 8 Pneumatic pumps Photopolymers assembler Revision table Air extraction and introduction motors. Film inversion system Roll to sheet cutting system Rollers (mm x quantity) 248 x 5 302 x 7 334 x 9 337 x 9 417 x 5 432 x 5 474 x 9 490 x 8 406 x 6 447,3 x 6 488,6 x 6 507,6 x 6 517,1 x 6 285 x 7 291 x 9 321 x 7 331 x 7 339 x 7 350 x 7 369 x 7 382 x 7 425 x 7 432 x 7 435 x 5 439 x 6 448 x 7 469 x 6 482 x 7 491 x 6 Anilox (Linearity/ BCM/ Utility) 250/7.35/lamination 300/6.4/printing 360/4.78/lamination 360/5.6/printing 360/5.05/printing 400/4.4/printing 400/4.4/printing 550/3.23/printing 550/3.52/printing 550/3.5/printing 550/3.06/printing 550/3.51/printing 600/3.3/printing 600/2.56/printing 700/2.6/printing 800/3.3/printing

2 machines listed below as a package (Comco 6 colour + Comco 1 colour) + Mark Andy 13” plate mounter 10 x Anilox rollers included all different specs More than 100 cylinders 11 Magnetic die cylinders Die-cutting size : 1/8 c.p 3.175mm 6 colour machine : Unwind : Yes Web Guide : Yes Corona Treater : No Splice table : Yes Drying : 6 U/V & 6 IR Driers Chiller : No Die Cutting : 3 stations De/Re-lam : Yes Laminating : Yes Hot Foiling : No Slitting : Knife Sheeter : Yes Conveyor : No Stacker : No Sprocket : Yes Turn Bar : Yes Rewind : Yes Waste Rewind : Yes Strobe : No Counter : Yes 1 colour machine : Unwind : Yes Web Guide : Yes Corona Treater : No Splice table : Yes Drying : 1 IR Drier Chiller : No Die Cutting : 3 stations De/Re-lam : No Laminating : Yes Hot Foiling : No Slitting : Knife Sheeter : Yes Conveyor : No Stacker : No Sprocket : Yes Turn Bar : No Rewind : Yes Waste Rewind : Yes Strobe : No Counter : Yes

Max. material width 18.5 inches Drying system - Heat resistance Print repeat range 24 inches Mechanical speed 300 ft/min Unwind and Rewind reel diam 3 inches Availability of web guides - Yes Availability Corona treater: - No Anilox - 19 Ceramic anilox Lines Nrs. 100 1 unit 360 2 units 400 2 units 440 3 units 550 4 units 600 2 units 700 4 units 800 1 unit Ciylinders included- 162. 31 x 111 2 x 122 25 x 138 7 x 142 15 x 148 1 x 152 26 x 163 4 x 164 37 x 174 10 x 177

Working hours: 34,313 Automatic registration system Splice on the fly automated unwinds and rewind Unwind is new as of July 2012 Chiller and temperature control unit are new as of 2008 1 UV dryer after deck # 11 cassette was rebuilt on March of 2015 Raised chill drums on all 11 print decks Natural gas, hot air drying on decks #1 through #10 Top press speed is 750fpm Press comes with 22 anilox rollers and an anilox roller storage cart Press comes with new Interflex enclosed doctor blade new as of April of 2009 All 11 print decks have been rebuilt as of April-2013 A new chill roller was installed on deck #11 in 2011 All print deck registrations sensors were new as of September 2010 Press comes with 11 Graymills peristaltic ink pumps Press comes with BST Super Handyscan 3000 new as of 2008 1/8” (operator side) and 1/16” (Transmission side) dual gear pitch impression cylinders All 11 print deck have had the print deck side frame and anilox pocket upgrades in 2017 The Enercon corona treater head and transformer are new as of 2008 Message center is new as of 2012 Lamination unwind PA 2224-07 Main unwind MR 2242BB Turret rewind LS 2742-B Chiller : Sterling, model # SMCA 25 (Temperature control unit for chiller Sterling SM2B2418-J) Corona treater: Enercon, model # TL Max Infeed unwind: KTI Lamination unwind: KTI Turret rewinder: KTI UV unit: UV Technologies Print cylinders: 96 - 12 108 - 11 110 - 11 112 - 10 116 - 2 124 - 3 128 - 9 132 - 10 136 - 11 138 - 8 140 - 11 150 - 11 152 - 11 156 - 11 160 - 7 164 - 10 168 - 11 172 - 8 180 - 8 184 - 8 Anilox rollers 400L-4.85V 600L-2.76V 500L-2.69V 500L-3.92V 500L-3.96V 1000L-1.40V 400L-4.83V 500L-3.85V 400L-4.97V 400L-3.34V 1000L-1.40V 400L-4.45V 400L-4.78V 200L-8.12V 400-4.87V 1000L-1.46V 1000L-1.47V 1000L-1.44V 200L-7.06V 400L-5.14V 400L-5.23V 140L-12.83V 600L-2.57V

Comco Proglide 8 color printing press: Chill Drum 18 inch 8-C Film Press Chill rolls KTI Lap splicer unwind 1 Die station Laminating 1 Product Rewind Plate Cylinders closed-loop soft tension Lamination Includes chiller