Maszyny sprzedawane

Używana Maszyna do produkcji torebek doy-pack: NISHIBE SBM-600-SPG 2008


Wyszukiwarka używanych maszyn

Podobne maszyny:

Maszyna do produkcji torebek doy-pack - NISHIBE - SBM-600-SPG

Dane techniczne maszyny używanej NISHIBE SBM-600-SPG

Ref.: 300046081

Marka: NISHIBE

Rok: 2008

Inne specyfikacje:

Standing pouch making machine with inline ultrasonic sealer, inline zipper and corner cut device from New Long . Earliest Pick Up April 2024

Due to the use of computer controlled servo motors for film feeding and sealing mechanisms it is possible to produce pouches with optimal conditions for each product. Sealing time remains constant independent of running speed.

Film width Max 1200mm
AC servo 4 servo

Production speed:
Zipper pouch: 30-120 cycles/min.
3-side seal pouch: 30-160 cycles/min.
Standing pouch: 30-140 cycles/min.* The production speed may be affected by the type of material and the cutting length.

Film Size Range:
Main film:W = 400mm-1250mm Diameter:800mm
Bottom tape for standing pouch:W = 60mm-180mm Diameter:500mm

Pouch Size Range:
3-side seal pouch:W=75mm-600mm L=50mm-500mm
3-side seal pouch with Zipper:(1-lane production) W=80mm-250mm L=200mm-550mm
3-side seal pouch with Zipper: (2-lane production) , W=80mm-250mm L=100mm-275mm
Standing pouch (with and without zipper): (1-lane production), W=80mm-200mm L=200mm-550mm
Standing pouch (with and without zipper): (2-lane production), W=80mm-200mm L=100mm-275mm

Unwinding Station
Film roll unwinder diameter max 800mm
Single shaft. 3-inch Air Shaft
Automatic Brake Control
L.P.C.Mitsuhashi Control
Bottom tape Vertical type. Automatic Brake Control
Zipper Reel Stand:2 units
Bottom tape punching unit

Main Body:
Zipper Sealing and Cooling Unit:Heater (L:520mm), Cooling Bar (L: 250mm)
Longitudinal Sealing Unit: Heater (L:620mm L:520mm for standing pouch) : 4pcs.(W:80/50/50/80mm), Rubber Base
Longitudinal Cooling Unit: Cooling Bar (L:520mm) : 4pcs.(W:70/30/30/70mm), Rubber Base
Razor Unit at the middle feed roller: Razor Holder : 1pc., Trimming Guide
Bottom Sealing Unit: 5 units (Point Sealing Unit: 3 units)
Bottom Cooling Unit: 2 units
Razor Unit at the front feed roller Razor Holder : 4pcs., Trimming Guide
Monitor:Touch Screen
Table Conveyor:Up and down movement (Separate type)
Thermostat:22 pcs., Upper and lower limit warning