Used GEA Aseptomag Bertsch of 1988 for sale

Gea Aseptic System, all machine revision and upgrade in 2022 - Sterilizer, 12.000 l/h, - Aseptic Tank, 20.000 l, - Pasteurizer, 10.000 l/h

Sterilizer GEA from 1992 Capacity 2000 l/h Sterizaling temp. 142º Includes homogenisator APV Gaulin The head is single-stage Pressure 180 bar. Available immediately!

GEA slicer line from 2013 Includes: Batching machine SHINGLE LOADER 600 GEA CHECK weighing system CHECK 3000 weighing system Slicer GEA MEGA SLICER kDetector (9) X-RAY GEA OPTISCAN The machine was used for meat chips 160 slices (slice weight 0.0024 g, thickness 0.8 mm) per minute. Downtime between batches 10 sec. Available from now. Dismantled but can be assembled and show running in dry cycle!

Standardising unit Standomat MCL/A for milk fat and cream fat control at full skimming, standardising or whole milk production Capacity: up to 25.000 l/h separator feed flow. Assembly: preassembled unit in a stainless steel rack with complete internal piping, wiring and pneumatical installation. Dimensions: L 1.400 mm x W 1.400 mm x H 2.100 mm. Product connections: DIN 11851 or TriClamp. Control features: milk fat control 0,5% – max. 0,2% below raw milk fat; cream fat control 25% - 45%. Homogenising feature: connections for partial homogenising (1/3 of feed flow) Evaluation of the cream fat content from the: density measured via a mass flow meter; control accuracy: milk +/- 0,025%; cream +/- 0,25%. Mentioned values are average values at continuous and steady operation. Included: - Separator control (but not separator itself, this is needed additionally) - Flow meter for feed flow control giving a signal for the supply pump speed - Skim milk back pressure control - Operator panel: SCU 8 - Display: 6” monochrome touch screen - Keyboard: membrane keyboard, 32 keys - Communication: digital I/Os or Profibus DP - Control cabinet (W 800 mm x H 1.200 mm x D 300 mm): including valve cabinet Control System MCC The machine is still installed in the production hall

COMPLETE POWDER MILK PRODUCTION PLANT for processing of 96.000 liters milk per day Original year not known. Refurbished in 2008. Products: powered milk, instant milk, powdered whey Height of the powdered milk production plant - 17 m Worked 14 h/day, because 2 hours were needed for washing during the process and 2 hours for washing at the end of the day ( depending on the milk quality) Example: reception 4.700 l/h of skimmed milk can give 427 kg/h powder milk Example: reception 4.700 l/h of full milk can give 522 kg/h powder milk Depending on the milk quality, washing during the process, and washing at the end of the day, the plant can work max 20 h/day, if there is enough raw material The plant consists of: 1. GEA three stage evaporator with capacity of 4 700 l/h with all associated installations and pumps and a steam divider; 2. Atomizer NIRO with instant powder and auxiliary towers, diffuser with a replacement diffuser, cyclones, water and other pumps 3. CIP for whey cristalization tanks (25m3) 4. Whey crystallization tanks – 4 pieces x 6 000 l with heat exchanger APV 5. Ice water system 30m3 with associated installations; 6. Control panel, main electrical board: Siemens S7 The equipment was installed in 2008, when completely new electrical installations, water pumps, pipelines and layer on the atomizer were made. The installed power of the plant is 105kw.Steam consumption 1 150kg/h 11 bar. The production stopped in December 2017. The equipment is still installed and could be seen on site. The set of evaporator, spray dryer and control panel could be sold separately.