Used BATTENFELD FISCHER machines for sale

  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • BATTENFELD-FISCHER Machines sold in the past:

    Addtional sngle-head included (could blow 5 liter containers) Schleisser controller Lenze motor with inverter, Gefran 1200 electronic temperature control Leak tester optional for additional cost
    1. 2x single screw extruder type 150/24 WT 160 kW, DC-drive in gantry desgin Screw diameter/Length 150 / 25 D Screw speed range HMPE 2-40 min-1 Output: HMPE/HDPE 25-500 kg/h Heating zones number 4+1 Heating capacity 55,8 kW 2. Accumulator head 150 with axial wall thickness control including 2 sets of parison tools Number of dies 1 Head Volume 150 dm3 Die Diameter 370-1000 mm Heating zones number 5 Heating capacity 107 kW 3. Press 2438 mm High x 2438 mm wide clamping section Clamp tonnage 273 ton Max.-min Platen opening 2540 mm - 762 mm Manual vertical Height adjustment +/- 127 mm Side to side adjustment +/- 380 mm 4. Barber-Colman MACO 6000 Microprocessor control system wit h Lumitech display panel
    Mould platen sizes (mm) 530x550 Opening stroke (mm) 490 - 790 Clamping force (KN) 20 Tn Automatic Deflashing unit
    Mould clamping force: 300 kN Dry cycle: 5 sec Opening stroke min/max: 500 mm / 860 mm Mould opening stroke: 360 mm Mould dimentions: 600 mm / 2x250 mm / 600 mm Heating zones of extruder: 4 Stackable canisters can be produced, hydraulic circuit The machine was producing: 20 litre stackable canister. With a weight of 950g the canister is produced in 60s. That is 60 pieces/hour or 57 kg/hour. System PWDS with SWDR nozzle, PWDS for 100 points is installed Deflashing system No additional equipment and no leakage tester Original screw and cylinder In 2011 a complete overhaul was carried out in Germany: renovating the mechanics and replacing the computer with a modern Siemens S7 controller.
    Accumulation-head BFB 2-30T, manufacturing air-ducts Clamping force: :300 kN Extruder :80/24D Equipment: Siemens control SP 3 (new 2007) Clamping speed: 400 mm / s Hydraulic power: 22 kW Die head: BFKS 4 Accu-head capacity 6,3 liters Two step holder Axial wall thickness control: 64 points Platen size: 650 * 1000 closed / open: 405/800 Bottom blow pin Mould width max: 650mm Mould height max: 1000 mm Mould thickness min: 500 mm Mould opening stroke: 400 mm Max. Mould weight: 2500 kg Mask weight max: 700 kg

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.