Used EUROMAC machines for sale

Euromac is an Italian company with more than 50 years of experience. Since 1968 it has been manufacturing slitter rewinders for plastic films, laminates, paper, aluminum foil and other materials for food and non-food flexible packaging, becoming one of the world's leading manufacturers. Euromac create high technology machines in continuous development analyzing the specific needs of each customer in order to meet all their needs.
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • Machines sold in the past:

    Hydraulic turret punching machine Machine available from week 38 (2022) Two mooltitoll XMTE 6-24 mm tools are added to the machine to increase the number of tools for punching. Punching tool set. X Axis : 2250 Table Type: BRUSHES Tooling Type: THICK TURRET Clamps Type:AUTOM. LONG Safety Barrier:PHOTOCELL Automatic Tool Lubrification: YES External Colling System: Yes UPS System: YES Teleservice: NO ELECTRICAL HYDRAULIC CARATTERISTIC Power Supply Value: 400 Power Supply Frequency (HZ):50 Motor Type (HP):7,5 Electrical Input (A):6,1 Pump Type: 20/24 Maximum Pressure Cyrcuit (bar): 240 POTENTIOMETER SETTINGS Maximal Upstroke: 26,35 Lower Downstroke -3.65 Reference value of Punch Stroke: 4,9 AXES PARAMETERS "X" Axis Reset Quote: 225010 "Y" Axis Reset Quote: 124610 Refer. pin "X" Position: 1936.65 Refer, internal pin "X" Pos.: 1066,60 Maximum sheet weight : 150 kg Brush table USB port Punching force: 30 t
    Materials: Film and Laminates. Paper: 40-130 g/m2 Metalised or pearled BOPP 20-100 microns Coupled up to 60 – 200 ìm Max. web width 1650 mm Maximum roll diameter 1200 mm Maximum diameter of master reel 1000 mm Maximum diameter of rewinding reel 610 mm Internal diameter of unwinding cores 76, 152 mm in cardboard Internal diameter of rewinding cores 76.4 mm shaft diameter Maximum weight of rewinding: 76,4 mm 300 kg 152,4 mm 380 kg Tolerance of rewinding cores + 0.4 mm Speed up to 600 m/min (it can be reached depending on the condition of the material) Edge guide BST Eltromat ekr 500 digital and CLS Pro 600 Razor blade with bottom knives 6 pieces razor blade holder 22 pieces bottom knives Shafts: 4x 76,4mm of diameter at rewinder, 1 x 152mm shaft at unwinder Trim exhaust blower included (from other machine) The machine is made of the following parts: 1.Unwinder model SV 2.10M Machine for unwinding reels at constant tension. Sliding supports: four plates support the sliding guides. The unwinder rests on the sliding guides by means of four wheels. Transversa/ movement: achieved by means of hydraulic cylinder + 75 mm run managed by FIFE equipment, CDP-01 model. 2.Platform for passing the web 3.TB 3.06 T2F Slitter rewinder machine 4.Rewinding turret 5. 1 x Trolley for unloading completed reel Electrical power supply 3 x 400 Vac + 10% - 50 Hz Auxiliary services 220 Vac - 24 Vdc Compressed air pressure 6 bar Total installed power 92 KW Power utilised 74 KW circa Average air consumption 20 NI/min.
    Mother reel width : Max 1400mm 6 stations with independent motors and arms. Frame for the passage from unwinding to rewinding. Automatic handling of the mother reel from a pallet. Trolley to unload the finished reels from the rewinder. Materials: PP/PE – Pet/PE -- PA/PE - PP/PP - PP Coex Shrink film Thickness : 250µ - 13µ Unwinder Type : 1 Single shaft Knife Type : Razor blades and Rotatives Knifes Roll Core Diameter : Unwinder 6’’ / rewinder :3 ‘’
    Station winder with 5 independent winding stations, each consisting of 2 winding arms. of which 1 arm of each station is driven by its own motor. The stations can take 76 and 152 cores of cardboard or plastic. The shaftless unwinder with pneumatically tensioning clamping heads is mounted on linear slides with their own guides that allow lateral movement with an adjustment range of with an adjustment range of ± 100 mm. The automatic web edge control, manufactured by BST, can detect both web edges and control lines. The cutting group is designed for a circular knife cut (scissor cut principle). It consists of a lower slitter shaft equipped with multiple grooving knives and a cutter shaft equipped with circular knives. The final reels can be taken directly from the winding stations, or, in the case of heavier weights, they can be placed on the removal trolley and out of the machine from the side. Materials PET 10 - 150µ OPP 20 - 50µ PE 25 - 180µ Composites, both duplex and triplex up to 400µ Average production speed m/min 400 Average production output m/h 24000 Internal core diameter 76 mm Ply 5 Inner diameter of core 152 mm Use 5 max. weight unwinding Kg 1000
    Delivery time Q4 2021 when new machine is installed Thickness range: 80-1000microns Maximum mother reel weight: 2500 kg Unwinder: Shaftless Internal core diameter at unwinder: 152mm Internal core diameter at rewinder: 76 and 152mm pick up on pallet Unwinding speed: 250 m/min Break type: 4 quadrant motor Wed guide Fife Number of blades: 25 Number of under-blades: 34 Number of final rolls: 24 Width of final rolls: 50-1600 Friction shafts at the rewinder: Yes / 68 rings Number of shafts at the rewinder: 2 Siemens S7 Control Unwinder driving system AC, 2x7.5 kW Rewinder driving system AC, 2x5.5 kW Control panel: Siemens S300 Consumed power: 69 kW