Used MITSUBISHI machines for sale

Mitsubishi can filler and Angelus seamer from 1996 For Slim/Standard/Sleek cans Output: 32,000 cans/hour For hot filling juice, tea, coffee (no CSD) 40 head can filler 6 head can seamer Angelus model 62H Can be inspected in production and available March 2020

Mitsubishi Can filler from year 2000 Model FKM 120 HU Can line speed: 60,000 cans per hour, or 22,000 liters per hour Volumetric Fill Both Hot Fill and Cold Fill capability Formats: 250 , 350 ml standard 269 ml can – change parts Electronically refurbished in 2017, with report from Mitsubishi Dismantled and available immediately

Complete can filling line for CSD Line was filling juices and compatible with pulp Line consists on the following equipment: - Depalletiser Krones( from year 1998) Includes pallet magazine - Can rinser 2000) - Filler Mitsubishi (2000) Electronically refurbished. Volumetric fill, hot/cold filling. Up to 60.000cph or 22.000lph Model: FKM120 HU - Can lid feeder (2000) - Full conveyor system Krones, includes accumulators and accesories - 2 x shrink wrappers Kisters (1998) - Palletizer Krones (1998) - Pallet wrapper Line does not have can seamer Dismantled and available immediately

Complete Mitsubishi can filling line for still drinks from 1989, 330ml, 30.000 cph, completely overhauled and converted for 202 cans in Nov2014 Line includes: - Canco depalletizer for empty cans, 608-I-HUL, from 1989, with rope convy of 60m - Mitsubishi filling machine 202-206, FKEJ40T, from 1989, completely overhauled and converted for 202 cans in Nov2014, 330ml, 30.000 cph - Angelus seamer for 202 cans 121L, from 1989, 33.000 cph (complete overhaul done in Nov 2014) - Mitsubishi conveyors (retort controls and loading and unloading mechanism) - ESS SG and Haisan MY EC 800L evaporative condensor (cooling tower) with SS tanks (CT with 3 fans with 3 SS tanks of 40 KL each) - 1 set of Mitsubishi conveyors (Retort Controls and Loading and unloading Mechanism), from 1989 - Pama cooling tunnel PF001PP10, from 1989 - CMB Tech can and case conveyors with variomotor (Plastic Chain conveyors X1LIN90), from 1989 - Filtec height detector FT-50, from 2010 - Domino inkjet date coder A200+, from 2010 - TapTone can pressure detector T100, from 2010 - KHS shrink packer Innopack PSP A-M, from 2010 (cans in 6X4 pattern, Pad + Film) (with documents and spare parts) - Diagraph bar coder PA6000 for filled cartons, from 2010 (16 inches/second) - Marchem pallet coder for filled pallets CIM 300, from 2008 (printer plus applicator) - Rieckermann palletizer, from 1989 (39.000 cph) - Spare parts and machine documentation In production until 31/12/2015.

MITSUBISHI, 15000 MT/Y, 6700 mm BOPP Film Production Line Basic Specification 1. Film type: BOPP film, Plain film, ABA (ABC): standard co-extruded film, ABB: co-extruded matt film Pearlized film 2. Material: Base layer: Homo-PP; Skin layer: ethylene-propylene copolymer 3. Film thickness range: Co-extruded film: 10 - 50 microns 4. Film width: 6700mm 5. The diameter of the largest roll: 1600mm 6. The highest speed: 320m/min 7. Draw ratio: MDO 1:1～1:5; TDO 1:1～1:8 8. Capacity: 2500 kg/h 9. Dimension of Line (Net machine size) Total length: approx. 120 m; Width: approx. 12 m; 10. Extruder output: Main extruder: Max. 2000kg/h; Satellite extruder: Max. 140kg/h*2 lines Mechanical Specification 1. extrusion system 1.1 Main Extruder Screw diameter: 150 primary extruder; 200 secondary extruder 1.2 co-extruder: 2 sets Screw diameter: 90 mm diameter 1.3 Screen changer 1.3.1 Screen filter for main extruder Type: disc filter Filter area: 2.25 m2 Heating system: electrical heated 1.3.2 Co –extruder filter Type: sliding 2 disc heater Hydraulic station: provide screen change for two extruders 1.4 Co-extruder die Type: T-die Width of lip: 980mm Gap of lip: 3.2±1.5mm Die bolt: 31, with electrical heater 2. casting machine spped: 0-68m/min cooling roll: 1 piece,φ 1600×1300mm The surface is hard-chrome plated and mirror polished 2.1 air knife: 1 set 2.2 double water bath 3. Longitudinal stretching machine (MDO) Speed: Low speed: 0-74.8m/min High speed: 0-340m/min Working width: 1300mm Stretching ratio:1:1-1:5 Roll temperature range: 0-180 ºC 3.1 pre-heat roll roll diameter: φ 600*1300mm pre-heat roll: 14 pieces surface: hard-chrome plated and mirror polished 3.2 stretching roll: roll diameter: φ 800*1300mm hard-chrome plated and mirror polished 4 pieces 3.3 thermo setting roll roll diameter: φ 500*1300mm (2 pieces), φ 300*1300mm (2 pieces) hard-chrome plated and mirror polished 3.4 press roll roll diameter: φ 150*1300mm 11 pieces Rubber cover 4. Transverse stretching machine (TDO) Speed: 0-320 m/min Steam heating: 0-220 Inlet width: 640-780mm (Clip to clip): output 6990-7080mm Rail width: 55000mm Clip type: gliding Clip adjusting device: equipped at the entrance of rail Clip clamps when the spring functions Driven force: AC variable frequency motor（132KW） Heating area: 14 (1-4 pre-heating, 5-9 stretching, 10-14 annealing) Cooling area: 15-16 5. Pull roll system Speed: 0-320m/min Guiding roll: Æ314×7000 (4 pieces); Æ375×7000 (1 piece) Cooling roll: Æ500×7000 (2 pieces) Driven roll rubber cover: Æ320×7000 (6 pieces) Edge cutting device: blade and trimming knife with heating system 5.1 corona treatment Speed: 0-320m/min Working roll: Æ397×7000 (4 pieces) Electrode Numbers: 8 Voltage: 10kv at most Power: 20kw at most, 8 pieces 5.2 thickness gauge NDC gauge Infrared 5.3 winding machine speed: 0-320m/min max mill roll diameter: φ 1600mm film width: 6700mm winding: contact winding touch screen winding parameter setting 6. slitting machine Atlas Speed: 0-1000m/min Max un-winding diameter: φ 1600mm Min output width: 350mm Present production situation Comprehensive maintenance has been conducted in recent years. The machine is in stable running state, basically no hidden trouble and accidental shutdown. Maintenance free, yield rate and high quality rate has been high for years, developed good competitiveness in matt film. Especially after the equipment upgrading in the middle of 2012, the performance is greatly improved, not only stable in production, but also able to recycle all the scrapped edge film through the upgrading of waste material recovery system. 1. present working condition film grade: matt film 12μ m、14μ m、15μ m、17~22μ m Capacity: 32-50 Ton per day, annual capacity 15000 Ton Film breakage frequency: 2-3 times / day Maintenance model: planned maintenance accounts for over 95% Yield rate: 95%-96% Waste material recycle: over 95% 2. product quality High quality rate: 95%