Used TECNOVA machines for sale
Tecnova is a manufacturer of extrusion lines for the recycling of industrial and consumer plastics, for most of the thermoplastic materials such as fiber, foam, plastic film, etc. They also manufacture screws and cylinders that they commercialize through their brand Tecnoviti. Their machinery production factory is in Italy, and they are a world reference in recycling equipment for the quality of their machines. MachinePoint has used Tecnova recycling lines for sale for PE/PP film, PE/PP printed film, PP non-Woven, Raffia, bottles and shredded, thermoformed, LDPE, polyamides and expanded materials. MachinePoint also sells used Tecnova silos, used twin screw extruders, used single screw extruders, used repelletizing lines, used compounding machines.
TECNOVA Machines sold in the past:
HOME ASSEMBLED MACHINE :
TECNOVA srl – Oleggio (PO) Italy
DANTI PAOLO ec srl – Prato (PO) Italy
ELETTROTEX ec srl – Prato (PO) Italy
PROMEC sas – Prato (PO) Italy
THE SUSSEX GAUGE (AIPEX)
EUROTHERM
The machine is divided as follows :
Automatic pellet loader
Suction of a single component with level sensor on the hopper (no dosing system)
2 extruders : Extruder A: Ø60/30D: Extruder B : 90/30D
Extruder : Cylindrical die
Thickness range : 13-50 microns
Thickness control system : aipex capacitive head
Fixed die head
Diameter of the die head : 230mm
Rotating haul off
3 rings : 1 fixed and 2 rotatives
Forming unit : Calibrator
Cooling of the primary film with open circuit of cooled water regulated.
Primary Film dryer by air
3 levels of oven to heat the film to be blowned
Thermo-regulator 5 Zones for each extruders unit
Layer unit: A-B or A-B-A
Winding unit: 2 winders (back to back) – Width 1.780mm each
Lateral trimming Cutting system of the bubble
Knife unit for longitudinal cutting : Razor blade
Max rewinding reel diameter: 600 mm
Max line speed: 45 m/min
No corona treatment
No web guide
Material :
With all types of PP and PE resins and a combination of both.
Can produce shrink film of 13µ and more.
Currently, the line is working with the following combination: CopoPP AS400 (Ineos) / HomoPP HC101B F (Borealis) / CopoPP RB501BF (Boealis)
Tower included
Feeding silo for the grinded film
Forced feeding hopper prepared for connection to the extruder
Extruder 130/37 D with degasifier
185 KW direct current motor
6 heating zones
Hydraulic screen changer, diam. 220 mm
Frequency inverter
Water head cutting. No. of blades 4, driven by a 4 Kw motor
Tilting water/granule conveyor and screen for water/granule separation in stainless steel.
Stainless steel mechanical centrifuge
Centrifugal fan for granules launching, driven by a 1.5 Kw motor.
Silo for pellet collection
Conveyor belt
Grinder: 22kW
Metal detector
DC motor
Filter diameter is 125 mm
The cutting system has two stationary knife and three flying knife on the engine shaft.
The mixing mill is Bruno Folcieri TAV.1.T.T.C. 400, weights of mill 1500 kg, dimensions with tape of 5950x1500 mm.
The required working dimension for the plant is 8300x 9610 mm.
Conveyor belt 15 m / m
Silo capacity is 1000 kg
Two screws: one engine 2.22 kW and another 6.75 kW with double throttle regulation.
Silo engine motors and cylinder filler motors
Heating zones: 5
1 zone: 9000 W
2 zone 9000 W
3 zone 9000 W
4 zone 9000 W
5 zone 9000 W
Water consumption: 7 m3/h
Suitable for processing: PE/PP/PS
8mm diameter screen
Humidity max 3 %
Silo: capacity 2m³
Water head cutter
Air cooling
Venturi, cyclone and pipes
Installed power: 30 Kw
Regeneration plant with water head cutting for PE/PP/PS
8mm diameter screen
Print max. 50% - humidity max. 3
Film silo, capacity 2mc
Forced feeding
Extruder 60 LD 35 with degassing
Vacuum pump for degassing
DC motorization
Temperature control panel
Manual screen changer
Pressure control
Water head cutter
Big bag holder
Venturi, cyclone and tubes
More information
