B&B MAF SFS 8E-LT-1
GN PACKAGING GN46P
MAMATA VEGA 285-PM
WATERLINE RITEBAG 600-I SMARTBOTTLE
NISHIBE SBM 600 ST 4L DS
COEMTER T-Core 9270 38/25
MOBERT Roller 130-E-2M-AUT
FAS DT 1100/100
Ref.: 300041348
Brand: TOTANI
Year: 2003
Other Specifications:
Three Side Sealing (BH-60HV) with Standing Pouch unit so machine is (BH-60HVLLS) with crosswise simultaneous two-line printing rolls
Finished pouch dimensions:
Pouch width(feed length): 60 to 250mm
Pouch height: 120-270mm
Bottom gusset depth: 2-45mm (70mm)
Bottom punch diameter: 12 to 20mm
Film roll dimensions:
Main film roll
Max Diameter: 600mm (rolled on 3-inch pipe)
Min Width: 1100mm
Bottom Film roll
Max Diameter: 600mm (rolled on 3 inch pipe)
Min width: 150mm (2 shafts horizontal axis type for 2 line-pouch)
Max weight: 40kg
Film Speed: 25m/min
Feeding width: 200-600mm
Maximum feeding length: 500mm
Unwinding Device
Unwinding max diameter: 600mm (800mm is available under 30m/min film speed)
Maximum width : 1240mm
Automatic Tension control power brake device
AC servo motors
Plain films
max. 180 shots/min Feed pitch: 165mm
Printed film
max. 180 shots/min Feed pitch: 145mm
Longitudinal heater (feed direction)
Effective sealing length: 600mm...5 units
Longitudinal cooler (feed direction)
Effective cooling length: 500mm...5 units
Cross heater (width direction)
Effective sealing length: 600mm...2 units
Cross cooler (width direction)
Effective cooling length: 600mm... unit
Cross seal bar: maximum sealing width 80mm
Longitudinal seal bar: maximum sealing width 50mm
Power required : 29.5kW
Longitudinal heater: 13.0 kW
Cross heater: 9.6 kW
Heater moving Servo Motor: 3.5 kW
Film Drive Servo Motor: 2kW
Unwinding Motor: 0.4kW
Control System: 1.0 kW
Compressed Air: 0.6 MPa
Cooling water required : Approx. 3l/min
Equipment configuration:
2 bottom gusset punches... 2units
The standard punch diameter is 12 to 20mm.
One bottom seal photoelectric sensor (reflexion type)
One bottom film folding device (triangle plate type for 2-line operation)
2 bottom film unwinding device (with forced unwinding unit)
2 horizontal axis type bottom film roll sections
One bottom film guide spatula (for 2 line operation)
One point of point seal bar (one base, for 2 line operation)
1 Set of round corner punching tools and punching noch tools (more then 30 pieces)
Do you need advice?
We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.