-  - 二手机械 - MachinePoint
 -  - 二手机械 - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint
PTI -  - Used machine - MachinePoint

PTI DS 92/28 - DS 68/28 2007 技术参数

PVC异型材挤出线 PTI


二手 PTI DS 92/28 - DS 68/28 技术参数

联系我们 : 300031852

生产年份: 2007

品牌: PTI

状态: 待售

交货时间: 现货



技术规格:

型材宽度(最大): 350 mm

输出容量: 500 kg/h

·挤出机: DS 92/28

螺杆直径: 92 mm

螺丝数量:2

螺杆长径比L / D比: 28

其它规格:

1. Twin screw extruder DS 92/28 with single degassing and filter cooled by water
Motor Siemens Servomotor - 60 kW
Screw rotation 15 700Nm
Screw speed 0-28 rotation/min.
Heating zones (ceramic) on barrel 5x5 kW
Cooling zones on barrel (air cooling) 4
Output by documentation 460 kg/h
3 x volumetric dosing unit for material + additives and masterbatch
Heat sensor on extruder (Dynisco)
Dimensions: 4500 x 1600 x 2300 mm
Control by Siemens Extrusion Pro Pak

2. Second extruder double screw DS 68/28 with single degassing and filter cooled by water
Screws diam. 68 mm
L/D 28
Motor Siemens Servomotor 30 kW
Screw rotation 6200Nm
Screw speed 0-38 rotation/min.
Heating zones (ceramic) on barrel 4x2,5 kW
Cooling zones on barrel (air cooling) 4
Output by documentation 220 kg/h
2 x volumetric dosing unit for material for upper layer + masterbatch
Heat sensor on extruder (Dynisco)
Dimensions: 3500 x 1400 x 2300 mm
Control by Siemens Extrusion Pro Pak

3. Feed-block
Welding of two layers in proportion of 1:4—1:6
Heating 1 zone 2,5kW

4. Die head 15” (381mm)
3 x heating zones
Connected to feed-block
Set of tools for die regulation

5. Unit with cooling and embossing cylindres PTI KA 600
2 x Smooth, bimetallic cylindres, cromed, cooled by water diam. 305x610mm
1 x Embossing cylinder with wooden pattern, cromerd, cooled by water
1 x Rubber cylinder (rubber thickness 10 mm, hardness 70+/-5 Shore A) cooled by water
1 x pressure roll cromed, diam. 60x610mm for rubber cylinder
2 x Cromed rolls 60x610mm
Thermostatic device for 3 rolls (2 cromed smooth rolls and rubber roll)
Thermostatic device for embossing cylinder

6. Calibrating table with tank KT 3/4000.
1 x Water pump 3kW
2 x vacuum pump 3kW
1 x drying vent 1,5kW
Device to adjust table heigh from 900-1100mm
Possibility to transversal regulation of the table
Frame for calibrators and cooling tank 500x4000

7. Perforation unit with special punching device for dewatering holes
Distance and shape of holes as on photo (profile)

8. Haul off ABR 6
Max. product size height 100mm and width 350mm
Drive Siemens 2x1,1 kW
Speed 0-30m/min
Pulling height 1100-1200mm
Pulling rolls with pneumatic pressure IPulling power 8000N

9. Saw type guillotine SA 3
Cutting knife with drive Festo diam. 100mm
Max. speed of the line 30 m/min
Cutting accuracy +/-1mm/1m
Max. cutting width 350 mm

10. Stacking and packing table

11. Additional equipment
- Wrapping machine to cover hot PVC by decorative PMMA film
- Additional thermostation devise for rubber roll
- Licence for programs for line

其它细节:

保修: 无保修

运作情况: 不能运转。带产品状态可见

可供状态: 现货

    MachinePoint服务:

    提供工程服务 提供整修和大修服务 二手机器鉴定 国际化设备运输网络

Similar Products (CN):

˂
˃

商务会晤
˂
˃
*名:
*座机:
*公司全称:
*电子邮箱:
*城市:
*国家:
*备注:

联系我们

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com


MachinePoint全球网点