Stroje Podle kategorie
Vedoucí strojní obchodník pro evropské značky ve plastu a nápojových odvětví
Více o machinepoint »
Poskytuje inženýrské design, řízení projektů, technický specialista poradenské & konzultační služby
Dozvědět se více »
MachinePoint je otevřený a funguje jako obvykle. Více informací naleznete zde.
Třídící a oddělovací zařízení REDWAVE
Během vypuknutí koronaviru zůstáváme plně funkční.
Ref. : 300041385
postavení: Na prodej
Dodací lhůta: Bezprostřední
The NIR sorting line for (Fridge) hard plastics. It was using for sorting the WEEE plastics and for fridge plastics. The line was purchased without compressor.For Fridge plastic – the purity is usually 85-95 %. It depends of the PUR content.The machine was originally designed for separation of polystyrene (PS) from shredded refrigerator material with a very small input grain size of max. 100x100mm.The REDWAVE machine can identify PS, PC/ABS, ABS, PP, POM, PC , PET, PVC, PMMA, PE , PA and also allows to add new polymers. If you can find a sorting task for this materials (dry condition) compared with a grain size with max. 100mm this could be possible depending on the condition of the machine and specific input material composition.The REDWAVE SSI sorting system is designed to detect certain plastics in terms of their chemical composition and separate it in a further process step a stream of general material. It is thereby the special application of the SSI-system to sort fine grain and flake material. Technical description of sorting system:- Infeed conveyor The in feed conveyor transports and accelerates the sorting material into the detection area.- Sensor unit (processor unit) The sensor system REDWAVE SSI (Smart Spectral Imaging) is equipped with a multiSPEC camera unit used to detect infrared area. The lighting unit provides the intense light source to illuminate the material evenly. This light enters the sample and is both distributed and partly absorbed at the spectral band which is typical for the sample (dependent on elemental composition). The spectral distribution of the light reemitted from the sample is characteristic for a given material, permitting the evaluation of the sample. The reemitted light is guided to the camera objective and recorded by a special spectrograph. - Lighting unit The lighting unit is used to encourage the material to emit a specific spectrum of light which can be used to specify the material composition. - Ejection unit with valves The nozzle manifolds and valves are located in the ejection unit.These valves separate the material through a focused air jet from the main material stream.Additional pressure measuring equipment monitors the actual pressure.- Fan A fan transports fresh air to the lighting units and cools them by convection. This allows a constant temperature to be maintained and avoids the overheating of the sensor and its lights. - Control cabinet All electrical devices are arranged in the control cabinet. - Operating unit The machine is operated and set at the operating unit. Machine settings e.g. recipes, general settings, etc. can be changed. - Air service unit The air service unit is used for: Switching on and switching of pressurized air Pressure air regulation for the valves Cleaning of the pressure air by filter cartridge (40μm) Pressure gauge- Separating pulley / outfeed conveyor A separating pulley is used in two-way sorting machines, while the outfeed conveyor is a part of the three-way sorting machines. The separating pulley is a pulley which minimizes material stagnation because of rotation. - Passing chute In this chute the passing material is transferred to another conveying equipment.- Ejection chute In this chute the ejected material is transferred to another conveying equipment.
SEA PIXEL 5
SESOTEC MN 1920
HARTNER BALLECTOR 75-8
PREVIERO CUMBERLAND Metal separating plant
COSTARELLI QE D-1000/AU 160 kW
MAAG Primo 200E
TONONFORTY GALAXY 153-A STD
Ochrana Osobních Údajů
Compliance Managment System
Copyright © 2021 | Machine Point Consultants S.L. All rights reserved