Used Wicket bag making machine

The machine can process HD-PE, LD-PE, LLD-PE, PP. The film thickness can vary between 2x 20 and 60 µm (LD-PE). The machine can produce bags with a width of 70 to 400 mm and a length of 155 to 560 mm incl. flap (40-60 mm), as well as a bottom gusset of 27-60 mm. Unwinder 1350 with automatic web edge control and pneum. Unwinding shaft (core inner diameter 6") Unwinding width: 1350 mm Film roll Ø max: 1200 mm Roll pick-up above floor min: 200 mm Pneumatic longitudinal cutting unit with rotating knife which can also be used for longitudinal perforation. Folding triangle 1350 for the production of a half tube Folding device for the production of a bottom gussets Trimming unit with pneumatic adjustment of the cutting blade Punching tool for punching holes on the FD (folding triangle) for punching ventilation holes in the running film web. 2-hole punching device for the production of suspension holes Seam welding device Welding machine (main machine) with a cycle range length of 2.6 m Pin stacker Number of pick-up stations: 5 The machine has been regularly maintained and modernised. The machine has a total operating time of approx. 100,000 hours. The machine is fully functional and can be inspected and tested by appointment. The system is sold including all accessories and operating instructions

Carrying bag width ranges: 220 - 600 mm Carrying bag height ranges: 300 - 740 mm Material types and material thicknesses: Bag film HD-PE 2 x 20 - 30 microns LD-PE 2 x 34 - 70 microns LLD-PE 2 x 30 - 70 microns Slip film: LD-PE 70 - 90 pm Glue consumption: < 3 g/m2 Unwinder FA-UA 1600/1200 Unwinding width: max. 1600 mm Film unwinding: max. 1200 mm take-up height above floor: 200 mm Equipped with: - Circumferential drive with frequency-controlled three-phase motor 1 AWP 1600 steel, unwinding shaft pneumatic clamping for steel and cardboard tubes clamping range-0: 74 - 76 mm max. reel weight to be loaded: 2150 kg manual winding shaft adjustment to control the web edge hydraulic/motorised reel lifting TA 1600/6 m Dancer unit for web tension and speed control FD 1600 Folding triangle for the production of a half tube Infeed width of the flat film web: max. 1600 mm BF 1600.1 Bottom fold insertion device, for one-sided insertion of a bottom fold bottom fold depth: 30 - 80 mm equipped with - Arrangement on folding triangle - Pick-up frame with spring-loaded folding wheel and spreading device - Charging of the bottom fold DKT 850 Hotmelt Reinforcing sheet application station for the production of handle-hole carrier bags with inner gusset sheet reinforcement Reinforcing sheet Preferential and perforating device VS 850 Servo for pre-welding the bottom fold GS 850 Servo Handle hole punching device, for punching a handle hole STW 850 Cut-off seam welding device, for producing a side seam with welding wedge and welding roller ST-DKT 850 / 600 , Pen stacking product tray for collecting and stacking carrier bags with grip hole Entire unit can be moved up and down pneumatically Servo-drive for wing arms synchronous to the indexing machine, adjustable during production 3 vacuum hubs with 8 wing arms each

Material type: LDPE; LLDPE (Borstar); HDPE; pp Cast Foil type: sleeve, half sleeve, foil, bottom gusset, fold; perforation Bag type: punch, blocking; longitudinally sealing; adhesive tape Unwinder: width max.1350 mm Sealing type: welding strip 1,4 mm Width of the sealing bar: 930 mm Speed of Machine: min. 40 pcs/min – max. 150 pcs/min Bag width:min: 120 mm; max: 670 mm Thickness: min: 22 my; max: 150 my Bottom gusset: min: 27 mm – max: 100 mm Web guide double-sided FIFE (on the machine) Foil trim Core diameter: Ø 76 mm Roll diameter: max. 800 mm Printed foil: photocell Product ventilation: a) hole – YES b) cross - YES Spare parts

Materials OPP / CPP / HDPE / LDPE Bag Width (min-max) 80 mm - 400 mm Max Roll Width (min-max) 400 mm - 1360 mm Gusset Size (min-max) 30 mm - 70 mm Maximum speed app. 270 cpm for OPP materials (max bag width 200mm)

- maximum film roll diamtere on unwinder: 800 mm - max film width on unwinder: 1500 mm Thickness: 2 x 0,020 - 2 x 0,100 mm unwinder (with V-folding unit) bottom gusseter main machine(with drawing rollers, punching unit, hole perforators, edge film guiding device), welding unit, wicket stacker, fume extraction hood Type of welding side: side seal