Used Film coating plant

This machine is made to produce film for in-mold decoration In-mold Electronics base film Film-based touch sensors Printed Electronics base film Base material plastic film Width Max 1500mm Thickness 12~350μ Speed Max 50m/min Coating reverse coat Coating agent solvent type Application quantity 5~20μ wet Unwinder / Rewinder Turret, auto splice Coating station reverse type Main dryer INVEX mild float dryer 4m/unit ×4units Drive AC vector motor sectional

WAX COATING MACHINE Maximum speed 120m/min Number of unwinder shafts: 2 Number of rewinding shafts: 1 Max. diameter on main unwinder: 1000mm 3" pneumatic reel shaft Maximum diameter on secondary unwinder: 600mm 3" pneumatic reel shaft Maximum diameter in rewinder: 1000mm 3" pneumatic reel shaft Inside core diameter: 76mm Application system: Reverse Roll Installed power: 25 Hp

Coating machine 2 layers double side or double side various plastic films with possibility of lamination at the exit of the first drying tunnel Material : PE: 6/12/18/23/36/50/75/100 microns PP: from 18 to 100 microns Nylon film (OPA): from 15 to 15 microns These films may be blank or metallized 1 or 2 sides These films may be complexed at the exit of the first dryer with films of the same nature or with cellophane films, aluminum foils 9 and 12 and various papers. Drying by gas burner Kind of adhesive used on this coating machine : Solvent or aqueous based varnish Rated speed: 10 to 300m / min Maximum speed: 350 m / min Minimum coating speed: 40m / min Width: 1680mm Coated Width min: 800mm Coated Maximum width: 1670mm Unwinder & rewinder non stop: External reel diameter: 1000mm Core diameter: 152mm Maximum width core : 1730mm Maximum reel weight: 1500kg Pneumatic expanding shafts (Airmat) BST web guide: rewinder, unwinder non-stop, unwinder of lamination and after web turning Coating blocks 2 drying tunnels: 3 boxes of 2.5 m and 1 to 3m for each Following parts are missing : Corona treatment 4 antistatic bars (3 block 2 and 1 block 1) Speed display Viscometer Block 1 4 differential pressure switches 1 compressed air pressure switch 1 extraction motor tunnel 1 2 motor drives extraction tunnels 1 and 2 4 generators Antistatic bars 2 variators drying tunnel 1 and tunnel 2

These coating machines make FPC(flexible printed circuits) base Base material plastic film, aluminum foil Width MAX550mm Speed MAX10m/min Coating three roll reverse coat Coating agent synthetic resin adhesive solvent type, Polyester, epoxy, nitrile phenol, acrylic Application quantity 20~60μ dry Density 15~40% Viscosity 200~3000cps Solvent MIBK, propyl alcohol, isopropanol, toluole, ethyl alcohol Film diameter MAX 400mm Core 3 inch Machine constitution No.1 unwinder two arm turret with air shaft Web washer dip type Coating station three roll reverse type, Applicator roll, metaling roll, backing roll Hot air dryer and hot air device three zone with idler roll 9,5m No.2 unwinder two arm turret with air shaft Laminator nip by two roll type, Impression roll, convening roll Slit device share cut Rewinder two arm turret with air shaft Drive device sectional drive AC motor Electric 200v, 50hz, three-phase Air 6kg/c㎡G Steam 7kg/c㎡G Base material plastic film, aluminum foil Width MAX550mm Speed MAX10m/min Coating three roll reverse coat Coating agent synthetic resin adhesive solvent type, Polyester, epoxy, nitrile phenol, acrylic Application quantity 20~60μ dry Density 15~40% Viscosity 200~3000cps Solvent MIBK, propyl alcohol, isopropanol, toluole, ethyl alcohol Film diameter MAX 400mm Core 3 inch Machine constitution No.1 unwinder two arm turret with air shaft Web washer dip type Coating station three roll reverse type, Applicator roll, metaling roll, backing roll Hot air dryer and hot air device three zone with idler roll 9,5m No.2 unwinder two arm turret with air shaft Laminator nip by two roll type, Impression roll, convening roll Slit device share cut Rewinder two arm turret with air shaft Drive device sectional drive AC motor Electric 200v, 50hz, three-phase Air 6kg/c㎡G Steam 7kg/c㎡G

Laminator with Auto die profile control on both the laminating stations. Co-ex die on the second lamination unit. 2 Anchor coating stations and treatment arrangement at each sandwitching unit. Width : 1100 mm