Used Independent Rewind Stations Film Slitter-Rewinder

Max. working width: 2050mm (without oscillation) Thickness: CPP-18- 150 MICRON Maximum mother reel weight: 1500 KG Unwinder: CHUCK SYSTEM- GROUND PICKUP Internal core diameter: 3‘’ & 6‘’ Loading of mother reel station: 1 Unwinding speed: 800 M/MIN Web guiding system: E+L Slitting System: Knife type Number of blades: 9 Type of rewinder: WINDING CONTACT Number of final rolls: 3 Diameter of final rolls: MIN-300 MM , MAX.1200 Unwinder & Rewinder driving system: AC Power

Thickness min/max 30/200

The slitting and rewinding machine can rewind vacuum metallized materials like 15-60 µm OPP and 12-40 µm PET Web tension range: 7-30 daN Web path: overhead The idle rollers are covered with: Special grey rubber LHPA Unwinder parameters Maximum unwind reel weight: 1500 kg Maximum unwind reel chucking (min.reel width): 500 mm Unwinding roll pick-up from pallets on floor: Minimum diameter 400mm Blunt cone chucks for cores of: Inside diameter 3” and 6” ‘FIFE’ web guide system with optic web Edge sensor, moving the unwind stand sideways, stroke: ± 75mm Web tension nip unit. It consists of a chrome plated steel roller which is driven by a d.c. motor and by a rubber-covered nip roller (65 Shore rubber hardness) which is peumatically actuated. The lead motor drives, via power transmission belts, also the spreader roller, the slitting backup roll, and two rewinding pull units. Tendency driven (by belt system) rollers on the overhead web path. Bowed spreader with fixed bow (curve). Planetary adjustment of the arc, via selector switch, allowing to set the desired bow for the web. Rewinding section Double rewinding stations : 4 pcs, Max. reel diameter : 1000mm, Max. width : 1600mm (two driven levers) Slitting assembly Razor blade slitting system, by: Helios, model E2-40 Number of slitting heads: 5 Grooved counterroller, 2 mm pitch: 1 mm groove + 1 mm ring

Unwinding: Minimum width of core on unwinding: 700 mm Core size: 6" , 3" DC motor with brake Winding: Number of winding stations: 5 Maximum winding width with single drive motor: 500 mm Maximum winding width with two drive motors: 1000 mm Maximum winding diameter: 600 mm Core diameter: 6", 3" Winding station drive: DC motor 1kW Edge tracking system Sensor type: ultrasonic Terms of operation: +/- 100 mm Electrical equipment Main drive: DC motor Unwind drive: DC motor Winding drives: DC motor 1kW Control system: Simatic S5 Siemens

Material Thickness : 15-100 microns Unwind Roll maximum weight : 2500Kgs Reel lift minimum roll diameter : 500mm Unwind core I/D : 76mm & 152mm (3” and 6”) Minimum web width : 800mm Unwind Tension range : 10-100Kgs Rewind slit widths minimum : 300mm (on all stations) Trim System : Venturi Suction Trim widths : 10-40mm Rewind core inside diameters : 76mm & 152mm Rewind core Minimum Outside Diameter: 95mm Unwind stand type : Shaftless (with reel lift)