Machine Sold

Used Bi-axial film extrusion and stretching line: DMT of 2002


Search used machines

Similar Products:

Bi-axial film extrusion and stretching line - DMT -

Data Sheet of Used DMT

Ref.: 300043148

Brand: DMT

Year: 2002


    Other Specifications:

    Thickness range : 15 – 60 µm
    Film width : 6 800 mm on winder
    Line Capacity : 2 450 kg/h (18 767 tpa) of co-extruded film 3 layers A – B – C
    Stretching ratio: MDO (Mechanical) 1:1 – 1:8 TDO (Mechanical) 1:8 – 1:10
    Slow speed section(Mechanical) 5 – 75 m/min
    Fast speed section (Mechanical) 30 – 370 m/min

    Cascade main extruder Twin screw TM 133 MW
    Manufacturer: Maris
    DC drive – 01 Main extruder Motor Stand by
    Nominal output: 2 800 kg/h máximum
    Screw diameter 133 mm
    L/D ratio 28:1
    Max screw speed 300 rpm
    Electrical heating system
    7 cooling zones
    Total heating capacity 160kW
    Die slot width: 950mm approx.
    Die slot opening: 1,8 – 3,5 mm
    Surface area main filter: 6.36 m2

    Satellite extrusion
    2 Davis Standard Co-extruders
    Single screw extruder system
    Extruder 1: 150 kg/h
    Screw diameter 75mm
    L/D ratio 30:1
    Máx screw speed 120 rpm
    4 cooling zones
    Extruder 2: 200 kg/g
    Screw diameter 90 mm
    L/D ratio 30:1
    Máx screw speed 120 rpm
    6 cooling zones
    Included with double filters with surface area: 0.81m2/unit

    Casting Unit
    Chill roll
    Air knife
    Film and chill roll drying system
    Water bath

    MDO
    14 pre-heating rolls – Electrical heaters
    4 stretching rolls - Circulating oil
    2 annealing rolls – Electrical heaters
    5 nip rolls
    Total roll width: 1200mm
    Film width (max.): 950mm
    Tension control at inlet and outlet
    AC drive

    TDO
    Chain and chain track System
    Heating system: circulating air via individual heating system / zone
    (Electrical heater, motors, fans, sensor, etc)
    Edge guide system at inlet

    Pull Roll
    Manufacturer: DMT
    Cromed Rolls chilled by water
    2 corona treatment stations (up and down – Double treated)
    AC drive
    Thickness Gauge X- ray: - Measurement range: 5 – 100 µm

    Winder
    Working width: 6800 mm
    Core - Steel cores, 7500 mm length

    AC & PLC:- Fully integrated system PLC with operator workstations (Schnnider Electric)

    Raw Material:- Material feeding equipment
    Pneumatic conveying system
    Cyclone to separate resin and conveying air
    Metal separator
    Mixing hopper
    Suction conveying for Co-Extruder
    Conveying fans

    Slitter & Rewinder:- Atlas Slitter & Rewinder 6.8 m (1000 m/min – CW964)
    10 “Stations”


    Utilities: - Compressor, Boiler, Silos, Mill Rolls, Mill Roll Stands (corona and nip), Nip rolls stands, Over Head Crane (10 TM).