Used DMT BOPS of 1999 for sale

Thickness range : 15 – 60 µm Film width : 6 800 mm on winder Line Capacity : 2 450 kg/h (18 767 tpa) of co-extruded film 3 layers A – B – C Stretching ratio: MDO (Mechanical) 1:1 – 1:8 TDO (Mechanical) 1:8 – 1:10 Slow speed section(Mechanical) 5 – 75 m/min Fast speed section (Mechanical) 30 – 370 m/min Cascade main extruder Twin screw TM 133 MW Manufacturer: Maris DC drive – 01 Main extruder Motor Stand by Nominal output: 2 800 kg/h máximum Screw diameter 133 mm L/D ratio 28:1 Max screw speed 300 rpm Electrical heating system 7 cooling zones Total heating capacity 160kW Die slot width: 950mm approx. Die slot opening: 1,8 – 3,5 mm Surface area main filter: 6.36 m2 Satellite extrusion 2 Davis Standard Co-extruders Single screw extruder system Extruder 1: 150 kg/h Screw diameter 75mm L/D ratio 30:1 Máx screw speed 120 rpm 4 cooling zones Extruder 2: 200 kg/g Screw diameter 90 mm L/D ratio 30:1 Máx screw speed 120 rpm 6 cooling zones Included with double filters with surface area: 0.81m2/unit Casting Unit Chill roll Air knife Film and chill roll drying system Water bath MDO 14 pre-heating rolls – Electrical heaters 4 stretching rolls - Circulating oil 2 annealing rolls – Electrical heaters 5 nip rolls Total roll width: 1200mm Film width (max.): 950mm Tension control at inlet and outlet AC drive TDO Chain and chain track System Heating system: circulating air via individual heating system / zone (Electrical heater, motors, fans, sensor, etc) Edge guide system at inlet Pull Roll Manufacturer: DMT Cromed Rolls chilled by water 2 corona treatment stations (up and down – Double treated) AC drive Thickness Gauge X- ray: - Measurement range: 5 – 100 µm Winder Working width: 6800 mm Core - Steel cores, 7500 mm length AC & PLC:- Fully integrated system PLC with operator workstations (Schnnider Electric) Raw Material:- Material feeding equipment Pneumatic conveying system Cyclone to separate resin and conveying air Metal separator Mixing hopper Suction conveying for Co-Extruder Conveying fans Slitter & Rewinder:- Atlas Slitter & Rewinder 6.8 m (1000 m/min – CW964) 10 “Stations” Utilities: - Compressor, Boiler, Silos, Mill Rolls, Mill Roll Stands (corona and nip), Nip rolls stands, Over Head Crane (10 TM).

3 layers BOPP film / 3 extruders Nominal Film Thickness Range 15-40 my Extruder Screw diameters: 200 mm main Extruder ( center layer ), Davis Standart two 50mm Satellite Extruders, Davis Standart Screen changers: Candle type in Main Extruder, Screen type exchanger in Satelite Extruders Automatic Die Edi, width: 650 mm Chill roll:1400mm diameter, 900mm width. MDO stretching ratio : %4 - %6 number of heating rollers: 8 oil heated, 600mm diameter. number of stretching rollers: 4 oil heated, 150mm diameter. number of annealling rollers: 2 oil heated, 600mm diameter. TDO : Width at the start : 450 – 650 mm Width at the exit : 4000 – 4500 mm Type of heating : Oil Heated Total length: 33 mm. Pulling section : 4500 mm roll face width, max. 4400 mm film web width before edge slitting. Corona treatment : Sofftal 20 kw, 10 blade electrode. Thickness measurement : Measurex Beta Gauge, two gauges, after chill roll and pull roll stand. Two-position turret center driven winder, gap and contact winding rewinder 4200 mm DMT max diam bobinas 800 mm Edge trim and re-feeding system included : 300 kg/h capacity, 75-150 mm edge trim width. Water chiller optional (with optional. price) : Climavaneta 370 kw Slitter rewinder included (included in price) : Atlas CDE 820