Used Coextrusion lines: KIEFEL KIRION 70/100/70 F of 2007

Data Sheet of Used KIEFEL KIRION 70/100/70 F

Ref.: 300045046

Brand: KIEFEL

Year: 2007

Other Specifications:

KIEFEL KIRION® 70/100/70 F 3-layer coextrusion line,
KIRION® 250/500-3, 3-layer die head with 500 mm die diameter, KIRION® T 2200 reversing film take-off,
KIRION® W 2200 Plus2 automatic contact/gap/central winder and a KIRION® C automation system

KIRION® 250/500-3 3-layer blowing head suitable for die diameters from 250 mm to 500 mm
- designed to accommodate an IBC device
- 7 heating zones including temperature control with
- connection to the automation system KIRION® C via the highly interference-free bus system CAN

Die set for a die diameter of 500 mm
Gap: 2.0 mm

Control of the profile control
Ultrasonic bubble control for the control of the bubble diameter, with
- 3 ultrasonic sensors mounted on the arm of the calibration cage for non-contact measurement of the bubble diameter
- automatic control of the internal air exchange with a high-speed fine control unit and blower tracking,
- with connection to the KIRION® C automation system via the highly interference-free CAN bus system Internal cooling IBC
for operation "with short neck" for die diameter 500 mm

Profile control C2
- equipped with 64 heating cartridges to control the cooling ring air temperature with a HL 500/600 cooling ring (only in combination with KIRION® C profile control)
Lip insert 500-M
- double lip venturi insert for LLDPE/LDPE, "short-neck" mode of operation for die diameter 500 mm
Cooling ring blower 15 kW for cooling ring supply air, power: 15 kW

Gravimetric Dosing unit for 6 components in Extruder A, B and C from DOTECO Model J60

Thickness control Plast Control

Calibration basket type M 2200 - C
- for lying widths of max. 2200 mm
- motorized height adjustment
- motorized diameter adjustment
- min. lying width: half of the lying width of the haul-off
- including ultrasonic web break switch

1 film take-off KIRION® T 2200
- reversing haul-off, with
- frequency-controlled three-phase drive
- motorized adjustment
- rotating turning bars as starting aid
max. couch width: 2200 mm
min. lying width: 1100 mm
max. speed 200 m/min

Wrinkle minimization package (4) 2200 for very thin, thick, stiff or deep folded films with 4 additional aluminum rolls incl. insulating jacket per flat laying web installed before the infeed into the haul-off unit

ZEROTOUCH® 2200
special turner bar for the formation of an air cushion for the processing of sticky and scratch-sensitive films with frequency-controlled blower, special coating of the turner bars as well as including a rubber spreader roller between the two turner bars and an automatic blower adjustment depending on the reversing angle

Web Guide 2200EL

KIRION® W 2200 Plus2 Automatic double winder
Working width: 2200 mm
Web tension: 40 - 250 N
winding shafts: 76 mm
max. weight of winding shafts
including sleeve 100 kg
max. roller diameter: 500 mm
(for additional capacity see winding shaft load table)
Double winder, linear knife for transverse separation, winding principle: contact/gap/central winding,
max. speed 200 m/min

Includes
Eurochiller
PLASMAC Alpha 50 regranulator
Tower