Used HUBER & GRIMME HG 1400 of 2002 for sale

Still in full use and fully functional. Spindle new from 2022. Operating hours: As of October 2023 approx. 55,000 . Machine has been in series operation for 7 years in one shift and 12 years in two shifts Last audit: According to manufacturer's specifications, everything fully functional. Machine documentation complete. Complete repair documentation available Traverse Paths: X 1,000, Y 1,400, Z 700 Cube dimension: X 1,000, Y 800, Z 400 Spindle: Jäger, 2.5 kW, 40,000 rpm, WK19, in use since November 2022. Tool changer for 12 tools Rotary table, aluminium C-axis: 850mm. +/- 1,080 degrees Swivelling head A-axis: +/- 185 degrees NUM control unit with mobile control panel. Interface for data transmission Vacuum pump Busch Spare parts: Frequency inverter from 2018 (from SN325) Frequency inverter defective (known fault) Spindle cable new unused 3/2 way valve new unused

3D machined cube dimension X/Y/Z 2450/1100/600mm i.e. machine range approx. 3000/1700/850mm. IBAG milling spindle 6kW with 4500-40000rpm Tool magazine plate 12-fold NUM control 1050 with Windows XP Renishaw measuring system OMP40 Tool breakage and length control TS27R Safety system Brankamp Teach-in box NUM Without protective devices, this would have to be fitted by HG during assembly in order to obtain CE conformity Good condition, few operating hours

The machine has been retrofitted in 2016 by H&G. Machine equipped with an auto tools changer with 6 tool magazine. Axes : X = 920 Y = 1400 Z = 580 A = endless B = endless Max 3-D working range per table approx. 1000x780x400 Linear traverse paths approx. X,Y,Z, 920mm, 1400mm, 580mm 1 swivelling axes x 360° 1 vacuum system Busch 60 liters 1 manual central lubrication 1 CNC control system Num 1060, 14" monitor, 32 Bit system Inclined plane Pocket milling, mirroring 5 axis interpolation 5-D Spline Tool radius/length compensation Parameter programming 1 rapid traverse 30m/min in the linear axes, cabinet fan cooled (35°) 1 milling spindle Jäger, 2.8kW, 40000 1/with automatic tools changer for 6 tools, WK19 1 machine table, diameter 800mm 1 machine protection cover, lacquered with pneum. operated sliding door Changed in 2016 : 1/ Servo motor DS 56-S - new 2/ Servo motor DSG 56-S - axis Z - new 3/ 2 pieces - hub with set screw D=16mm 450H41.42 4/ 1 piece - retrofit set BF for control panel CP30-080731 5/ 1 piece - Spindle cable KS4-54/40 and KS4-21/40 6/ 2 pieces - LWL HITRONIC POF Simpl.10 meter PUR-PE 7/ 1 piece - Jäger motor spindle Z80 K440 54 (KS4-54/40) / 40000 rpm / 2.6kW / WK19 / PTC - new 8/ 1 piece - spindle initiator interface for WZW monitoring HG 2149008 9/ 1 piece - Graphic Processor V2 4Mo 0224202778 - new 10/ RFCS - Compressor cooling system 1500W, 50/60 Hz RFCS-G0-001500-W-L-R23-2-IW, 230V/1PH/50/60HZ, R 134a Compressor air cooling system 1.5Kw, incl. speed control, RAL 7035

Working hours: 5674,7 On 19.02.2019 the encoder cable for the spindle was changed. On 14.06.2019 the spindle was changed. Machining range in 5-axis mode: - X-axis mm 3100mm - Y-axis mm 1600mm - Z-axis mm 915mm C=365 grades / -180 grades A= +/-110 grades Spindle Model Z80 WK 25 Power: 4,6kW Rev/min: 30000 Control: NUM/HD The gantry design of HG GRIMME SysTech is synonymous with compact design. Even only the basic type G-S-F(20-10)/B as a starter model offers a high level of productivity. This series can be upgraded according the individual request of the customer: Separation panel for tandem operation, version with circular indexing table or shuttle table and much more. 5-axis milling of components in plastics and composites (CFRP, GFRP) convince automotive suppliers, aircraft and aerospace industries as well as the yacht building sector...Plexiglas PMMA

Control: NUM 40.000 u/min 2 tables 2 Molds x 6 sizes, each table one mold