Used Paper bag making machines: WINDMÖLLER & HÖLSCHER AM 8715 CL of 2016

Data Sheet of Used WINDMÖLLER & HÖLSCHER AM 8715 CL

Ref.: 300045485

Brand: WINDMÖLLER & HÖLSCHER

Year: 2016

Other Specifications:

AM 8715 CL Tuber and AD 8300 Bottomer for paper cement and building material sacks
Installed in 2017

Machine composed of the next main Units:
Tail end printer FLEXA 820
Tuber AM 8115 CL
Automation TRANSSYSTEMS between tuber and bottomer
Bottomer AD 8300
Glue preparation unit
Slitter Rewinder Longslit 1013
Set of Spareparts

Detail Description of each Unit:

Tail-End Printer FLEXA 820
Web width: mm 1620
Printing width:1320 mm
Print repeat range: mm 450 - 1500
Output speed when equipped with:
doctor chamber inking system: max. m/min 350
Materials to be printed: -Paper gsm 40 - 250 -Inks water based

Tuber AM 8115 CL for 3 plies
·Flat tube width min.cm 26
max.cm 60
·Cut-off length, stepped end min.cm 38
max.cm 105
·Cut-off length, flush cut min.cm 32
max.cm 105
·Roll width max.cm 123
·Roll diameter max.cm 130
·Output max.tubes/min.500
·Weight [1]
- without paper, without printer approx.kg 34,000
·Connected load without printer approx. kVA 90 with printer approx. kVA 105

BOTTOMER AD 8300 configured for production of sacks with or without bottom patches
·Sack lengths:
-Stepped end cm 41 - 74
-Flush cut [2] cm 41 - 74
·Bottom widths:
-Stepped end cm 9 - 14
-Flush cut cm 9 - 14 Sack width cm 32 - 55
·Width of opened bottom cm 18 - 34
·Bottom centre distance cm 32 - 60
· Tube lengths cm 54 - 94
·Valve patch:Valve unit, Version 8300
-Cut-off length cm 10 - 22
-Valve length cm 10 - 22
-Roll width cm 10 - 30 Valve unit, Version 8310
-Cut-off length cm 10 - 25
-Valve length cm 10 - 24
-Roll width cm 10 - 30
· Bottom patch: [2]
-Cut-off length cm 18 - 45
-Web width cm 8 - 18
·Output:
-AD 8300 with 2-drum delivery maximum 360 sacks/min
· Packet frequency:
-AD 8300 with 2-drum delivery maximum 28 hands /min

Energy requirements:
-Power consumption kW 65
-Connected load 400 V
-Control voltage 24 V DC
Air (600 kPa) Nm3/h 17

Glue Preparation Plant
-Adhesive preparation unit for cold water soluble starch-based adhesives
-Adhesive preparation unit extension for second adhesive viscosity
- Biozid Metering for precise and safe addition of adhesive preservative

SLITTER REWINDER Longslit 1013
Working width: 1.350 mm
Unwinding roll diameter: max. 1.300 mm
Inner core diameter: max. 76mm
Rewinding roll diameter: 1.300 mm
Inner core diameter: 76mm
Slitting width: min. 25 mm with max. 30knives
Material: Paper 50-200 g/m2
Speed: max. 400 m/min (depending on material)
Electrical requirement: 400 V, 50/60 cycles. 3 phases.
35 kVA
Compressed air requirement: 6-7 bar. 200 NL/min.
motor KW 30