PALLMANN H.I.Pallmann Agglomerator IPA 400/40
Agglomerator
EREMA Intarema 1310 TVEplus
Single screw repelletizing line
Ref.: 300045812
Brand: WIPA
Year: 2016
Other Specifications:
Less than 1500 hours working hours
The WiPa Plast Compactor Type PC is an agglomerator for gentle densification of plastics with low bulk density, for example: • fibres • film • stretch film • foamed materials • powder • fine particles
Output capacity depends a lot of type material (see chart)
Output of 1600kg/h mentioned in offer is max. for PE Film (350g/l) for instance
1 Plast-Compactor Type PC 700/250
Consisting of:
++Feeding Unit of the Plast-Compactor Type PC 700 :
Circular Buffer Tank with 2 level indicators, a service door, two windows and an agitator in the buffer container guarantees permanent filling of the feeding screw and prevents bridging.
The Feed Screw is mounted on generously sized rail system. That allows to decouple the Feeding Unit from the Plast-Compactor, for cleaning or maintenance, even with strong contamination.
Feed screw driven by a direct drive. The feed screw is divided in 2 pieces consisting of a bearing part and the transportation part.
The feeding unit is quickly and easily accessible for cleaning and maintenance.
Size / Volume ca. 3 m3
Material normal Steel
Drive Agitator 4kW
Drive feeding screw 22 kW.
++WiPa Plast-Compactor Type PC 700/250
The WiPA-Plast Compactor of the PC series is used for gentle processing of thermoplastic materials. In a continuous process the material is heated to its specific softening temperature area which is below the corresponding melting point.
The result is a high-quality agglomerate with high bulk density, easy to dose, with lowest possible thermal damage.
The feeding screw pre-compacts the plastic to be recycled and feeds it to the Plast-Compactor's disc pair. Kneading and rolling between the discs creates friction heat and plasticise, sinters and compresses the material.
Housing:
heavy welded steel sheet construction.
Compactor discs:
Disc diameter : 700 mm
Material: surface hardened special tool steel
Main Drive:
V-belt with guard for V-belts
Main Motor 1 x P = 250 kW, n = 1000 min-1
++ Central Discharge System for PC 700
Discharge of the agglomerate out of the Disc Housing of the Plast Compactor
* 1 central fan, Power 1 x P =11 KW
* capacity ca. 3.300m3/h
* Material inlet diam. 200 mm
* Material outlet diam. 200 mm
++ Electrical Control / Switch Cabinet
Electrical Control of the Plast-Compactor full automatic operation.