Used Agglomerators for Recycling

Speed of the agglomerating vane: 562min-1 Throughput depends on material, range 400-1900 kg/h (see picture rates) Inner working diameter of the die: 400mm Operating width: 40mm Number of pressure pieces: 2 Agitator Drive with spur gear motor (make SEW): 1.1kW Speed (rpm) of the agitator shafts: 5 min-1 Number of agitator shafts: 2 Number of agitator arms per shaft: 3 Discharge screw Drive by means of frequency controlled spur gear motor (make SEW): 3kW Speed (rpm) of the discharge screw (min .- max.): 9 - 128 min-1 Frequency control range:5-75 Hz Pitch of the discharge screw: 120mm Channel depth : 30mm Number of loosening paddles: 12 Cutting assembly Drive by means of frequency controlled electric motor: 11kW Speed of the rotating knives (variable): 66-495 m/min Frequency regulation range: 10-75 Hz Number of rotating knives: 2 Main drive Motor power: 250 kW Motor speed: 1000 m/min Type of protection: IP55

HV 70 Plastcompactor for the agglomeration of film and fibres. Throughput according to the material between 500- 1000 kg/h Conveyor belt Centre distance approx. 6000 mm Belt width approx. 1000 mm Power 2.2 kW With metal-free zone for mounting an inductive metal detector. Herbold Granulator Typ SMS 45/100-H5-3 90 kW three-phase motor Material transport to the storage silo Herbold Plastcompactor, type HV 70/250 Consisting of: 1 Storage silo feeding screw With agitator approx. 5.5 kW Theoretical filling volume: approx. 1.2 m³ material: mild steel Feed screw drive: approx. 11 kW 1 HERBOLD Plastcompactor, type HV 70/250 Tools: Disc diameter: 700 mm Housing: In welded steel design Bearing of rotating disc: Roller bearings in cast flange bearing housing, bearing sealing with rotary shaft seals Drive: V-belt with protection Three-phase motor: P = 250 kW Central blower: Transport fan (central blower) Herbold granulator type SML45/100-S4 2 Drive motor: 37 kW three-phase motor Intensive cooling: Consisting of 2 nozzles for the introduction of a fine spray mist to cool the grinding chamber. Blower with fines separation and fines return SZS II 630/200 Classifier unit for separating the fines from the agglomerate and returning the fines to the silo, 1 Screening machine: For screening the undersize particles (fines) Screen tension 1000 micron Diameter 1200 mm Drive approx. 2.2 kW Material conveyor type MFT with big bag station and automatic switchover to the on-site silo Material conveyor blower with drive motor approx. 11.00 kW, connecting pipework, cyclone separator with frame, double discharge spout for big bag filling, automatic switchover from big bag 1 to big bag 2 (and back) Automatic exhaust air filter (without ATEX devices and with preparation for retrofitting) 1 Electrical control unit 1 Industrial compressor with pressure vessel. P= 3.5kW Electrical connection to be provided on site 630 kVA

Machine was purchased by the owner in 2006 from Manufacturer (at manufacturer site was used as demostration machine) Scope of delivery: - Agglomerator - control unit - Control cabinet - Extraction system or filter - Classifying screen - Small conveyor belt We have the following spare parts: - 1x massaging shaft/beam - 35 knives Knife and knife arms available at: https://www.cutmetall.com/de/ermafa-ersatzteile/ Other spare parts must be customised.

Plast Compactor PC 700/250 for sale Machine manufacter: WIPA Werkzeug&Maschinenbau GmbH Working hours: 9100 Output up to 1.000 kg/h. Materials: PE/PP The machine is equipped with a rotary valve for fine material return, agglomerate cooling and with software integration of the agglomerate cooling into the control cabinet. Grinder, wind sifter and double bigbag station can be sold separately if required. The Plastcompactor has just been repaired, kneading bars and spindle adjustment replaced and everything readjusted, and a test run carried out. The system has not been run since then. The motor of the Dreher regrooving mill was replaced in 2014. CE Certified Machine Manuals available

H.I.Pallmann Agglomerator IPA 400/40 available for sale material that can be processed: PE, PP, LDPE, HDPE, MDPE, Agglomerator motor: 250 kW Fan motor: 18,5 kW Granulator motor: 55 kW Each machine has: - Cyclone - Powder separator - spare Part Package - Cutting mill Zerma 700/1000 - Electrical cabinet No longer in production, but in good working conditions. Machine was dismantled in 2023. Machine is intact with all parts, but dismantled and packed with film on stock.