Used SIPA PPS48/2000 of 2000 for sale

2000 | Ref.: 300046077

Injection moulding machine for PET preforms SIPA, In MachinePoint we work so that our buyers receive a professional service and so the transaction is safe.


Data Sheet of Used SIPA PPS48/2000

Ref.: 300046077

Year: 2000

Brand: SIPA

Status:
For sale

Ask for machine price Want to sell your machine?

Technical Specifications:


  • Preform Weight (Max): 18 g
  • Neck Type: PCO
  • Neck Diameter: 28 mm
  • Number Of Cavities: 48

Other Specifications:



SIPA PPS 48/2000 injection molding system for preforms, year 2000

Hours worked: 17.000

Includes:

- Sipa 48-cavity PPS48/2000 injection molding machine for preforms, year 2000
- Ceccato Aria CBS 15 G3 compressor, 15/10 bar, year 2013
- Worthington Creyssensac Rollair50 RLR50 Screwgard Rotair compressor 50/13 bar, year 2014 (with 16-bar tank, and air dryer)
- M.T.A. Aries Tech chiller, year 2012 (with Fiorini tank, year 2013 and Piovan dryer DPS70 600 kg/h, year 2014)
- Piovan mould dryer RPA2900, year 2014
- Friulair dryer (air and water dehumidifier) TEM105/AC, year 2014
- Piovan complete LGR colorant dosing unit and loader S50, year 2014
- 5x Sipa PPS48/200 moulds (36g & PCO28 neck, 21g & PCO28 neck, 18g & PCO28 neck, 32g & 30/25 neck, 18g & 30/25 neck)
- Hopper
- Outfeed conveyor
- Elmo Rietschle raw material vacuum cleaner (drying system)
- Copimec electric hoist on bridge crane.
- SDMO Volvo power generator, 550 KVA

Dismantled, stored and available immediately!

Other Details:


Guarantee: Without guarantee

Current condition: Dismantled. Can't be seen in running condition

Frequency: 50 Hz

Similar Products:


Machines sold in the past:


SIPA Blow moulder type ECS 10000 construction year 1997 Molds - 2 (10 cavity blowing mold for 250ml CSD) ; 2 (10 cavity blowing mold to 290ml water) Neck 28 mm type 1810 The machine includes Injection Blow molding machine Resin Dryer Resin Hopper : Model # H 2000 ; Dehumidifier Neck type - 28 mm 1810 neck finish Working hours - 108,000 . machine in very good conditions, immediately available
Used Sipa Linear blow moulding machine Model SIPA SFL4 The machine also includes chiller. Format used on this machine 0,33 to 0,7l 1881 neck products. It doesn’t includes the moulds. The machine will be in working condition till June the machine has approximately 56.000 working hours the machine has been dismantled the 1st of July 2022
Number of injection cavities:12 Number of injection molds: 4 Total number of cavities: 48 Injection Mold Pitch: 76mm Number of cavities per blow mold:12 Number of blow molds: 2 Blow mold pitch: 130 mm Machines included: SIPA ECS FX 20/48 IMD Vision System for in-line control of all bottles Plastic Systems PET dryer DR215 HT Plastic Systems vacuum pump and filter P5-T2 Eisbar air dehumidifier Molds: 1 set of injection molds for: 12g with 55mm SNAP flange, 12g with 54mm SNAP flange, 9g with 54mm SNAP flange 1 Set of blow moulds: compatible with the 12g 55mm preform 2 Sets of blow mould back plate Machine used for production of yougurt cups
Blower Sipa SFL 4 from 2009 Capacity : 7200 bph. Moulds not included: Working Hours :34 500 h Machine in working condition Available immediately!
Working hours: 8000 hours. It has a 32-cavity injection mold, a 13.5-gram preform, neck 30/25. The blowing mold has 16 cavities, for 0.33 liters. The previous mold is also included (also 0.33L, but for the old neck 30/25 2-input), as well as males and mouths of this type. The machine is working at a capacity of 8,000 bottles/hour, but it can reach up to 11,500 bph. It includes dryer and cabin conditioner. It has an electronic component broken. .

Ask for machine price

Injection moulding machine for PET preforms - SIPA - PPS48/2000 - Ref.300046077


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.