Used Thermoformer: ILLIG RV53C of 2010

Data Sheet of Used ILLIG RV53C

Ref.: 300046311

Brand: ILLIG

Year: 2010

Other Specifications:

ROK 550 reel holder, for reels up to 1200mm diameter
Max. sheet width: 550mm
Max. reel weight: 870kg
Unwind speed with servomotor: 1-40m/min
Unwind speed in manual mode up to 60m/min
Max. sheet feed required by machine: 800mm
Length: 1630mm
Width: 1230mm
Height: 980mm
Weight : 360 Kg

Forming machine :
Forming area min-max: 300x100/500x350mm
Tool width between transport chains min/max: 320/520mm
Tool length in feed direction min/max: 124/374mm
Max. thermoformed part height: 100mm
Sheet width min-max: 340-550mm
Chain spacing per side max: 15mm
Upper heater: 12.6 kW
Lower heater: 9.8 kW
Upper/lower heater length: 1125-875mm
Max. vacuum pump capacity: 40m3/h
Max. clamping force: 70 kN
Max. forming pressure: 3 bar
Compressed air tank: 45 liters
Total forming station electrical power: 29.1 kW
Max. output: 45 cycles/min

Auxiliary cutting :
Max. output: 40 cycles/min
Max. cutting area: 500x350mm
Tool width between conveyor chains max: 520mm
Tool length in feed direction max: 374mm
Total electrical power of auxiliary cutter: 3.5 kW
Max. cutting force: 120 kN

Cutting press :
Max. asynchronous motor (servomotor) speed: 23 (35) strokes/min.
Total electrical power for thread heating: 3.9kW
Max. cutting force: 400 kN
Total electrical power of cutting press (servomotor): 6.4 (7.1) kW

Stacker :
Asynchronous motor speed (servomotor) max: 23 (45) strokes/min
Max. stacking height: 270mm
Stacking station total electrical power (servomotor): 1.2 (1.0) kW

12/12/2023 : 25926 working hours