Used Thermoformer

Looking for a used Thermoformer? Visit us to see our selection for sale!. Thermoformer Illig, Gn, Gabler, Rigo, Amut Comi, Parco, W.M. Wrapping Machinery Sa, Geiss, Kiefel, Pozzo, Perros, Atem, Thermoware, Villa, T2, Agami, Moretti, Qs Group, Güven Teknik, Cannon, Tft, Cannon Shelley
 Brand - Model   Material  Forming Area (Vxh)  Year

ILLIG - RV53

Forming machine ; Forming area min. : 300 x 100 mm Material width max./min. : 540/340 mm Part height above/below working height : 100/30 mm Material r...

PVC,PET,PS 500x350 2012

GN - 800

Clamping and Cutting Force 72 Ton Sheet Width 840mm Material Roll Diameter 1200 mm It is possible to cut in the forming station Infrared heating ...

CPET, PET, PP, HIPS, OPS, PVC 800x570 2015

GABLER - M98 Maxx

Automatic forming machine M98 that uses trim-in-place (punch and die) tools in tilting technology Forming Station Main drive with servo Tilting tabl...

PP, PET, HIPS 800x550 2011

ILLIG - UA 152L BE

Thermoforming line with adjustable window plates. Can do twin sheet if needed Currently the machine process semi-finished products up to 8 mm thickne...

ABS, ASA, PE, PP, PVC, PC, PET 1500x1500 2001

GN - 1914 DM

Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: ...

PP BOPS, OPS, GPPS, PS, HIPS, PVC, PET 482x355 2017

GN - 1914 DM

Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: ...

PP BOPS, OPS, GPPS, PS, HIPS, PVC, PET 482x355 2016

RIGO - Milano

Forming Area Max - 600 x 560 mm Forming Area min - 400 x 300 mm Speed - 1500 cycle/h Automatic quickly change mould Preheater for PP Heated die with ...

PP PE 600x560 mm 1999

AMUT COMI - AMP 630 GP/FL

The high speed fully automatic pressure thermoforming machine, AMP series, for the production of food packaging articles are designed to fit moulds wi...

HIPS, PP, A-PET, R-PET, PLA 650x530 2017

PARCO - Quattro ME

Ceramic heaters: 80 Manual loading Approx. 25000 operating hours There are several window plates for common material formats available Plug Assist ...

ABS, PS, PET, PVC, PE, PC, 1250x800x600 2008

W.M. WRAPPING MACHINERY SA - FC 600E

FC 600 E electrically driven thermoforming machine (vacuum-pressure forming, cutting, counting and stacking) Max. external forming mold dimension: 640...

640x450 2010

GEISS - DU 1300U7

Manual Feeding Power of each heater: 2 x 70 kW Regulation of heaters: Yes Photo Cell Control no Control: pneumatic...

1200x1000 mm 1995

GEISS - DU 1000 x 900 x 400 U8

Quick clamping system for tools Motorised stepless clamping frame adjustment in both axes Motorised stepless window panel adjustment in both axes For...

1000x900 2012

W.M. WRAPPING MACHINERY SA - FCS 750 HS

3 stations : Forming / Cutting / Stacking Max. reel diameter: 1200 mm Sheet width: 900mm Heater length: 1570mm Closing force: 50,000daN Speed (dry cy...

PS, PET 750x530 2000

KIEFEL - KL 1 SH 52 BFS

3 stations: forming/cutting - punching - stacking Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0,2mm - max.3mm Depth of draw pos/ne...

PET, PVC, PP, PS, HIPS 540x420 1993

ILLIG - RDM 50K

Includes a 95 mm diameter HIPS cup mould and 14 sets of interchangeable insert parts with capacities from 0.2 to 0.5 litres Maximum material width: 52...

PS,PP 500x280 1987

KIEFEL - KMV 50 D

Max Tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Maximum sheet width: 545 mm Stacker A/B Max. cycles/min: 35...

PS, OPS, EPS, PP, PE, PVC, APET, CPET, RPET 500 x 350 2002

GN - 2220C/B

Max. sheet width: 595 mm Clamping force: 60 t Output: 25 cycle/min. (depending on material) Max. unwinder reel diameter: 711 mm....

OPS, PVC, HIPS, PET, PP 560 x 508 2005

ILLIG - RV74

Forming - cutting - stacking Forming machine: Min-max forming area : 400x250-700x500 Min-max film width: 440-750mm Height of parts above / below the ...

PS – PS/PE – PE/PS/PE– PVC – PET – ABS 700x500 1998

KIEFEL - KMD 75 BFSS

Working hours 87361 Preassure air forming Min forming area 380 x 270 mm Max. Sheet width 800 mm Power of each heater: 31.5kW Control of heaters: PT...

750 x 540 mm 2003

KIEFEL - KMD 75 BFSS

Working hours 55462 Control updated in 2022 Preassure air forming Min forming area 380 x 270 mm Max. Sheet width 900 mm Power of each heater: 38.25 ...

811 x 613 mm 2004

ILLIG - UA 225 g

Only 2640 Working hours The machine has an automatic changeover function, upper punch with pneumatic drive, mould table with pneumatic drive and posi...

2200x1200 2008

ILLIG - RV53

3 stations : forming - cutting - stacking Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material wi...

500x350 1995

GABLER - D600

Pre-heating unit "2 Heat" for D600 Sheet width max. 640 mm Forming area: 600 x 320 mm Drawing depth maxi: 40 mm neg./ 15 mm pos Equipment of D600 Top...

PP, PS; PE, 640x320 2015

POZZO - AP101S

Film in reel up to 2mm in automatic and plates in format up to 6mm in semi-automatic all thermoformable materials Max format: 700x500mm Min Format: 4...

All thermoformable materials 700x500mm 1995

PERROS - SV-VF-15-10-06

The machine has ceramic resistors and vacuum pump. Control system model: SIMATIC OP 37 The machine does not have plate loader neither automations for ...

ABS, PETG, PS 1000x1500 2002

ATEM - Modular Rapid

Resistance: total 112 (56 up and 56 down) size mm 60x250 and 600 W/cd with a total power of 67,2 kW. Vacuum pump 4 kW with flow 165 m3/h and pressi...

ABS PET, PC 1810x860 mm 2005

THERMOWARE - THW 3516 - THW 3500

Pack of 4 EPS foam cup machines, molds, 2 packaging units, 2 tester units (1 tester THW 125E year 2005 & 1 tester THW 3320 year 2008), 1 pre-expander ...

EPS 2008

ILLIG - UA 100 G PR

Refurbished in 2016 Depth of Draw: positive 600 mm; negative 300 mm Preheater Feed length: 1000 mm Photo cell sagging control Pneumatic plug assist...

PS, ABS, PET-G, ESD 1000x700 2007

VILLA - BR/3 1510

Maximum sheet size mm 1560x1060 Minimum frame hole size (width x depth) mm 355x255 Ceramic Heaters Quick Mold Change System with removable table Pneum...

PST; ABS; ABS+PMMA; HDPE; PC; PETG 1500x1000 2006

KIEFEL - KMD 52

Working hours 83774h Preassure air forming New display Min Forming Area 260 x 220 mm Max. Sheet width 570 mm Power of each heater: 15kW Control of h...

520 x 400mm 2000

VILLA - 3000 - BR/5 3020S

Sheet fed thermoforming machine complete with automatic loader Hours of operation: 8000 Cooling fans: 12 Quartz heating plate elements, Size 240x15m...

3000x2000 2010

T2 - 5035/15-10

Punching press and thermoforming machine t2 for PP/PET eggs trays (mould not available) Punching press Max widh material 640 mm Cutting dimensions 64...

PE 550x490 1999

PARCO - PARCO 2Z

3 stations : forming - cutting - stacking Materials : PET, PP, PS, PVC Max mold size : 550x450 Max sheet width : 590mm Depth of draw : 120mm Sheet thi...

PET, PP, PS, PVC 540x390 2000

RIGO - Speedy

Materials PP-HIPS Preheater Min mould area 480x220 mm Clamping force 400.000N Mechanical cycles /min max 35...

PP 800x360 2005

VILLA - BR3 1510

Max. Forming Area:1500x1000 mm Material: ABS, PST, PC, HDPE, PMMA Film depth positive and negative:600mm Material Thickness: min 1 mm - max 10 mm Move...

1500 x 1000 mm 2000

ATEM - SS CV

Thermoforming area: 3000 x 2000 mm Depth of draw: 500 mm Material: ABS, PP,PE,PET,PMMA,PC,PS Material thickness: min 2 mm - max 12 mm Movement looking...

3000x2000 1996

GABLER - M92L

Cups and containers up to 2mm have been produced Very low usage Drawing depth negative 150 mm Drawing depth optional 200 mm Film width PP 410...804...

PP, PS 750x436 2007

AGAMI - A4

4-s linear thermoforming vertical machine Processed material - Plastic tape as a roll (PS) Finished product-Thermoformed plastic bottles Productivit...

PS 2013

KIEFEL - KL52 BFS

Used to produce lids for yoghurt pots Min thermoforming area 250x200 mm Max sheet width 560 mm Clamping force thermoforming and cutting station 500kN...

ABS, PS,OPS,EPS,PP, PE, PVC, APET, CPET 540x400 1996

MORETTI - VPK-C 76

Max cycles/min : PS 25-30/PP 8-20 Max sheet width : 800 mm...

PET, PS, PVC 700x600 1994

GEISS - U7

Max. sheet width: 1100mm Nº & type of heaters: 27+18 Quartz Power of each heater: 200/400W Regulation of heating elements: Yes Sheet thickness : owner...

PE, ABS 1000x800 1995

ILLIG - UA 100ed

Control was changed in 2015 Pneumatic Drive Sheet width: 1000mm Ceramic Heaters Power of Heater: 26kW 3 Heating Zones Power Consumption: 30kWh, 40 A W...

960x560mm 2014

GN - 1914

Maximum dry cycles/minute: 50...

OPS, PVC, OPS, PET, PP 482x355 2007

QS GROUP - SF-SV-22-13-06p

This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productio...

ABS, ASA, HIPS, PC, PE, PP, PMMA, PVC 2310x1360mm 2007

VILLA - BR3 1510

Heating system Ceramic Heaters Manual Sheet loader Vacuum pump 2,2 kw...

PS, ABS, PMMA, PC, PP, PSPE, HDPE, PC-ABS, PETG 1500x1000 2001

ILLIG - RDM 70 k

Max Film width 730mm Scope of equipment: - Unwinder - Open preheating station - Heating station - Forming and punching station - Stacking unit - Gr...

680 x 280 1998

GEISS - T7

Twin-Sheet Therrmoforming machine with automatic sheet loader and only 20.000 working hours New screen and new cylinders in lifting table replaced b...

2200x1300mm 1998

THERMOWARE - THW 3500

Thermoforming area 1200x1300 Max moulding positions: 95mm Material: EPS dimensions of 80 ml cup: 55,6 mm high; 57 mm diameter dimensions of 200 ml cup...

EPS 1200x1300 1993

GN - 1407TM

This machine is designed to produce termoforming moulded products with a pre-punch streching of material. Moulding and cutting of finished products is...

PP PET, HIPS, PVC, ABS, PS, OPS 320x180 2005

ILLIG - RV53

Forming machine Forming area: min. 300 x 100mm Part height above/below material level: 100/30mm Material width: max./min. 540/340mm Feed accuracy (ma...

500x350 1991

GÜVEN TEKNIK - GT7030

Used thermoformer + packaging machine Chain moving with Servo Motor Servo main engine 11 kw ( 31 Nm,3000 rpm ) Servo Plug Assist Motor 7.5 kw ( 25.5 N...

PP, PET,PS 700 x 400 2012

T2 - 83100/15-35 PMI

Thermoforming machine for egg containers Max sheet width: 880 mm Max tool size: 850x1020 mm Platen clamping force: 35,000 kg Horizontal cutting unit...

PET,PP,PS 830x1000 2007

CANNON - PF 171506

Twin-sheet thermoforming machine complete with two automatic loaders Upper and lower oven with halogen lamps 5 fans for cooling ...

1650x1500 2005

ILLIG - UA 101L BE

Thermoforming line with adjustable window plates. Currently the machine process semi-finished products up to 8 mm thickness. 10 mm is certainly also...

ABS, ASA, PE, PP, PVC, PC, PET 960 x 710 mm 2000

THERMOWARE - THW 3510 - THW 3516 - THW 3508

Pack of 3 EPS cups machines including testing & counting machine & pre-expander VA40 (year 1999) 1/EPS cups machine THW 3510 YEAR 2002 Max number of ...

2002

PARCO - ME 1513

manual sheet loading temperature control automatic air refrigeration ceramic lamps PLC control...

ABS, PS, PMMA 1500x1300mm 2005

ILLIG - RDM50K

In mold cutting station Output: 40 Cycles/Min Mold closing force: 150KN Feed length: max 300mm Photo cell: IFM sensor Pneumatic plug assist Drive: S...

PP, PS 500x280 1998

ILLIG - RV53

Forming area min. 300x100 mm Forming height above/below sheet : 100/30 mm Sheet width: max./min. 550/340 mm Max. number of cycles: 18/minute depending...

PS, PET, PP 500x350 1989

GEISS - DU 2500 T3

140 KW 250 Amps Upper heater with quartz heating elements Upper & lower infrared heating Side and rear protection Pneumatic punch 4 cooling fans Sup...

2500x1600 1988

TFT - FCS 720

Unwinder: motor power : 0.75kW Tilting power : 1.1kW Width max center line : 1200mm Weight roll max : 1000kg Forming station : Mold max dimension ...

HIPS, PS 720x430 1996

TFT - FCS 720HS

Unwinder motor power : 0.75kW Tilting power : 1.1kW Width max center line : 1200mm Weight roll max : 1000kg Forming station : Mold max dimension : ...

HIPS, PS 720 x 430 1998

GEISS - DU 1000x1500 T8

Max sheet size 1010 x 1510 mm Min sheet size 510 x 510 mm Max mold height H500 Hours worked approximately 28,000h Halogen lamps Availability March 202...

PP/ABS/PS/PE/PVC/ABS-PMMA/PC/PEI/PETG 1500x1000 2006

ILLIG - UA150ED-BE

Illig vacuum forming and deep drawing machine type UA150 ED: -Upper side Plug Assist unit with remote adjustment -6-fold cooling fan reinforced -up...

1450x950 1988

ILLIG - RD53

The machine will be available from middle October. Operating hours: 81.000 h, still in production Stations: Forming, Cutting and Stacking Min Formi...

PP, HIPS, PS, PVC, PET 500x350 2004SOLD

AMUT COMI - ACF820

Unwinder SFSE/ACF820 with electric coil lift Reel diameter: 1200 mm max Core inner diameter max: 75-152 mm ACF820 off-line thermoforming machine Th...

HIPS, BOPS, PP, PET, PVC, PLA 820x650 2019SOLD

KIEFEL - KMD 78 SPEED

Film Unwinding Station KA 83 Coil dimension max. - Width 830mm / Ø1200mm Coil Core Dimension - Ø76mm / 152mm Unwinding Shaft / Coil Weight max. - Ø70m...

PS OPS, EPS, PP, PE, PVC, PET, CPET, PLA 760 x 540 MM 2017SOLD

ILLIG - RV53

ILLIG RV53 thermoforming machine with stacker from 1992 with 130.000 hours, in good working condition Min-max forming area: 300x100 - 500x350mm Part ...

PS, PET, PP 500x350 1992SOLD

ILLIG - RV 53B

Forming area: max. 500x350 mm, min. 300x100 mm Height of forming above/below working level: 100/30 mm Film width: max./min. 550/340 mm Film thickness:...

PS, PET, PP 500x350 mm 1998SOLD

VILLA - NPO 120

2 stations : Forming - Cutting Film Width: 560mm Output min-max 5-18 cycles/min...

PET, PVC, PP, PS, HIPS 540x500mm 2002SOLD

ILLIG - SB 74 C3

Thermoforming capacity 500 X 700 X 100. With the following options: - Waterproof housing with bubble system. - Heating transmitters selecta...

PET 500X700 1981SOLD

VILLA - BR/3CS 1513

Minimum thermoforming size (width x length) 500x400 mm Upper heating power 47 Kw Lower heating power 29 Kw Pre Heating Power 29 Kw Ceramic Heats Sheet...

PST; ABS; ABS+PMMA; HDPE; PC; PETG 1500x1300 2003SOLD

GEISS - T7

The machine is still in production and will become available in approx. week 28. After that, it will be dismantled and replaced by a new Geiss Machine...

PS, ABS 2460x960 1997SOLD

ILLIG - UA150/EDBE

Materials : ABS, Polypropylene (PP), Polyethylene (PE), Poly carbonate (PC), Polystyrene (PS), Polymethylmethacrylate (PMMA) Impact 7000, Makrolon Pol...

ABS, PP, PE, PC, PS, PMMA, EPS 1500x1000 1985SOLD

CANNON SHELLEY - Forma PF 3015

Thermoformer with feeding unit with lower preheating Basic machine ( UA ) Equipment : ∙ Top heating in version halogen radiator (Flash), f...

ABS, PE, PP, ABS-TPU, ABS-PMMA 3000x1500 2008SOLD

GEISS - DU 1500 T6

Sell since needed space for new machine Quartz heating elements The movement of the heater tables for the bottom table it is pneumatic driven, the top...

1500x1000mm 1993SOLD

ILLIG - RDM 63/10

Dimensions of the table surface (L * W) = 900 * 300 mm. Working stroke of the table = 125 mm. The maximum width of the film = 750 mm. Machine overall ...

PS, PP 650x300 1987SOLD
ILLIG RV53 - MachinePoint

ILLIG RV53 - 2012

Forming machine ;
Forming area min. : 300 x 100 mm
Material width max./min. : 540/340 mm
Part height above/below working height : 100/30 mm
Material roll diameter : 1200 mm
Suction capacity of vacuum pump : 40 m3/h
Installed electrical load of top heater : 9,8 kW
Length of top heater : 845 mm
Installed electrical load of bottom heater : 5,6 kW
Length of bottom heater : 5...

 

Contact Us

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
See our other Offices »

MachinePoint all around the world