Used Thermoformer: ILLIG Rv74c of 2009

Data Sheet of Used ILLIG Rv74c

Ref.: 300047625

Brand: ILLIG

Year: 2009

---

Other Specifications:

Min forming Area: 400x250mm

Mold width between film transport max. 724, min 420mm
Tool length in feed direction max 538mm, min 274mm
Feed length. max. 540, min. 250
Molding height above the film level max. 120
Molding height below the film level. max. .4ö
Table stroke top max. 160
Table stroke below max. 195
Upper frame stroke top max. 140
Heating length of the top heater 2000mm
Heating length of bottom heater 1875mm
Delivery capacity of the vacuum pump max. 100m3/h
Mold clamping force max. 80kN
Mold pressure. max. 2
Amount of heat to be dissipated max. 40 000
Compressed air tank 12 l

Max. number of cycles 35

Steel rule punch
Number of cycles max. 35
Punching Force max 500 kN
Tool width between foil transport. max. 724mm
Tool length in feed direction max.538mm
Punching dimension in feed direction. max.514mm
Punching dimension transverse to the feed direction max.704mm
Tool height at the upper table max. 140mm
Tool height at upper table min.80mm
Tool height at lower table max.60mm
Punched part height above the foil levelmax. 120mm
Punched part height below the foil level max. 40
Table stroke top max. 128mm
Table stroke below max. 52mm
Heating plate temperature max. 200C

Individual electrical connection values
Table drive -servomotor 2kW
Steel strip cutting heating.7,2kW
Total electrical connection max. 17.5kW

Stacking station (stacking direction upwards)
Number of cycles max. 35/min
Stacking height 400mm

Rewinder device (integrated in the frame)
Punching grid roller diameter max. 600mm

Chiller included Tool-Temp TT-2800-DG