FENCO - FT-312
Tomato processing factory. TOMATO EVAPORATOR FENCO FT-312 Complete with PLC control cabinet, valves, pumps, level sensors, thermostat etc ...
2005 | 300046789 | FENCO
More information
Used Tomato processing factory
Looking for a used Tomato processing factory? Visit us to see our selection for sale!. Tomato processing factory Fenco
More information
- Tomato processing factory
- Fruits processing line
- Filling and packing machines for fruit and vegetables
- Aseptic filler for drums and bins
- Filling machine for pouches
- Glass bottles filling machine
- Labeller
- Other machines for filling and packing
- Packer
- Processing machines for fruit and vegetables
- Crusher
- Depulpers
- Evaporators
- Juice Extractors
- Other processing machines
Similar Products:
FLOTTWEG grinding and pressing fruit and vegetables
Fruits processing line
2014
Ref: 300046092
FLOTTWEG
Ref: 300046092
FLOTTWEG
More information
ROLMARK TR-1000, short pasta machine
Other processing machines
2006
Ref: 300045969
ROLMARK
Ref: 300045969
ROLMARK
More information
Machines sold in the past:
TECHNOLOGICAL LINE FOR TOMATO PUREE AND FRUIT CONCENTRATES – for 6000 kg/h
PREPARING AND JUICE YIELD
1 pc. VERTICAL ELEVATOR WITH HOPPER
1 pc. WASHIG-SORTING MACHINE; Capacity: 8000 kg/h
1 pc. GRINDING MILL; Capacity: 5000 - 8000 kg/h
1 pc. SCREW PUMP WITH HOPPER; Capacity 2.4 - 10m3/h
1 pc. HEAT EXCHANGER; Capacity: 8000 kg/h
1 pc. STRAINING SECTION - TURBO; Capacity:8 000 kg/h
1 pc. SCREW CONVEYOR
1 pc. OPENED INTERMEDIATE JUICE TANK; Capacity: 600 l
1 pc. CENTRIFUGAL PUMP; Capacity: up to 20 m3/h
ELECTRICAL PANEL
CONCENTRATION
2 pc. JUICE TANKS WITH AGITATORS; Capacity: 5.000 l
1 pc. EVAPORATING INSTALATION
EVAPORATORS/SEPARATORS
- 3 Evaporator bodies - for the continuous concentration of the product by means of fresh steam or vapours respectively.
- 3 Vapor-Separators - connected with the evaporator bodies, equipped with all necessary connecting pieces, cleaning spray ball and sight glasses.
- 3 PRODUCT RECIRCULATING PUMPS - specially designed for viscous products. For recirculation of the product and for conveying through the stages.
2 CONDENSATE PUMPS - centrifugal pumps in sanitary execution. For removing the condensate from the evaporators
STEAM SATURATOR - For saturation of the dry steam.
MIXING CONDENSATOR - for condensation of the residual vapors. Equipped with the necessary spray nozzles, all connecting pieces for the vapors, the down pipe, the cooling water.
2 VACUUM PUMPS - to provide and keep the vacuum in the system
STEEL FRAMEWORK - for the supporting of the evaporators and separators, fixation of piping, to provide easy operation and maintenance.
CONTROL PANEL
SET OF CONTROL SYSTEMS
STEAM PRESSURE CONTROL- control valve with membrane drive, PI-controller, pressure transmitter, compressed air reducing station, compressed air filter
REFRACTOMETER - for regulating the dry content of the concentrate
3 Two way pneumatic valves, pressure indicators, thermometers, level controllers
SEALING WATER SYSTEM - for the operating of the pumps which are equipped with mechanical seals.
PIPING and FITTINGS - complete set.
COOLING WATER CYCLE
- one cooling tower – 1 200 000 kcal
- circulation pumps – 2 pcs
- electrical panel
All pipes and fittings for the cooling cycle are not included in the offer – it is matter of projecting the plant, The concrete basins for the recycling water are mater of building in place as well.
PIPES AND FITTINGS FOR THE LINE
GENERAL DATA OF THE COMPLETE LINE
Technical Characteristics:
Capacity (processed tomatoes) t/24h: 150
Product capacity: 28-30 Brix kg/h: 1 000
Evaporating capacity kg/h: 5 000
CLEANING STATION- CIP
CIP-TANK: In stainless steel, pickled. Equipped with supports, cover and the necessary connecting - pieces.
PIPING/FITTINGS/VALVES: For the connections between tank, pump and valves. Equipped with unions and the
necessary hand valves. All metal parts in contact with the liquids are made of stainless steel.
CENTRIFUGAL PUMP: Complete with mounted, closed AC-motor.Pump capacity up to 20 000 l/h
All pipes and fittings for the cooling cycle are not included in the offer – it is matter of projecting the plant. The concrete basins for the recycling water are mater of building in place as well.
All metal parts in contact with the product are made of stainless steel.
Final packaging format: Filling “bag in drum” 250L. NOT ASEPTIC.
The line was used only one month. Still installed, but out of use for more than 10 years.
ROASTED PEPPER LINE
Capacity: 1,200 Kg / hour
Lift hopper (brand F. Mateo)
550 x 65 furnace with motovariador in support bench and with another oven included, this second with some refractory rings that would have to be replaced
Trawler
Monarch burner
2500 l diesel tank.
Elevator 6 m.
3.5 m conveyor belt
Unraveled band 4,5 m. with two benches, rotating blades
Peeler / washing machine
Revision band 9.5 m
2.5 m lift
Pallet climber 4 m.
2 m bass drum washing machine
5.5 m dull band.
ROASTED PIQUILLO PEPPER LINE
Capacity: 800 kg / hour
The oven is the same listed above
Unraveled band 5.5 m
Peeler / washing machine
Lifting belt
9 m dull band
Tables disk accumulator (2x750)
Stage table accumulator disk
Covering liquid dispenser EZMA 107
2m hinge tape
ASPARAGUS MANUFACTURING LINE - EMERITO
Capacity: 800 kg/ hour
Saw / scalder, by immersion
Raft Cooler / Showers
Working band of about 18 m 12 peelers Emeritus 12 currently mounted nozzles
they are of the calibers: 9-10 (the nozzles can be changed if it is going to work with stud of other calibers)
13-14 / 15-16 / 17-17 / 18-19 / 20-21 / 22-23
4 more peelers, currently not mounted 7-8 / 10-11 / 10-11 / 12-13
7 m hinge tape with government liquid dispenser
STALK LINE
Stem Scalder
Lifting belt
Selector drum
Caliper
4 Emeritus peelers, currently with nozzles: 21-23 / 17-19 / 13-15 / 11-12
In addition 1 tub for asparagus soak, where the fresh asparagus pallet is introduced to soak in water before putting it in production line
SPINACH MANUFACTURING LINE
Capacity: 1,000 Kg / hour
4 m vibrating steam scaler
EZMA 6.5 m immersion bucket scalder
EZMA stainless steel cooler 2.5 m
Drainer vibrator
Empty container accumulator disk
Dull 3 kilos / jar V-720 3 m
Ribbon 9 m. transport full containers
EZMA 107 government liquid dispenser
ETAYO JIMENEZ´S accumulator disk
Covering liquid tanks and pumps
Spinach cutting mill
CARDOON MANUFACTURING LINE
Capacity: 1,000 Kg / hour
The line is the same as spinach, varying some elements at the beginning and end
Dull table Thistle 3.5 m
Tilting machine
Cutting tables
Elevator to scalder
Band take out garbage 7 m
EZMA 107 government liquid dispenser
PREPARATION OF PEPPER IN STRIPS LINE
Stainless table
Dull stainless table
2 flap tape 1.2 + 2.4 m
Oil and vinaigrette dispensers
4 m stainless steel preheater. x 4 streets
EZMA government liquid dispenser
Accumulation table
Hinge tape
TOMATO MACHINERY
2 pasteurizers, tomato
1 EZMA tomato pastry
1 tomato peel remover
1 mono pump
2 stainless mono pumps
1 tomato grinder mill with mono EZMA pump
1 tank with motor and stirrer for sauces and juices
1 tomato sieve
PEACH MACHINERY
EZMA ferris wheel scalder
Bass drum washing machine
Marrodan Calibrator
Working band
CHAMPIIGNON Y LEGUME MACHINERY
Mushroom Calibrator
Filling machine with motovariador
Mushroom Laminator
Green Bean Calibrator
CLOSERS
Ruibus 18 C 20 1/2 cil
Ruibus 18 C 20 1/3 cil
Somme 330 1/4 cil
VEM glass
Cenzano manuals
WAREHOUSE AND TRANSPORTATION
Labeling machine 1/2 k - 1/4 k - 1/3 k Párraga
Olivé glass labeller
Soldi shrink wrapping machine
Soldi Retractable Tunnel
Videojet Excel S100 Marker
Cartoner Saenz half kilo / kilo
Toyota BM electric pallet truck
Mic electric pallet elevator