Used GN machines for sale

Depth of Draw (negative): 120mm (4.7")maximum Depth of Draw (positive): 25mm (1")maximum Sheet Width: 350mm (13.8")maximum (depending on material type) Material Roll Diameter: 1000mm (39.3")maximum Dry Cycles per Minute: 35 maximum Power Consumption: 15 Kilowatts/hr (Approximate) Cooling Water Consumption : 13 Litres/min @ 15ºC - 20ºC Electronic control of camshaft with variable cam speed within one cycle Horizontal Stacking Servo-drive sheet transport system Double guided spike chains Multi-zone heating Production setting storage for up to 32 moulds Multi-zone contact heating system Pneumatic roll lift

Minimum forming area: 241mm x 190mm (9.5“ x 7.5“) minimum Sheet Width : 533mm (21“) maximum - 292mm (11.5“) minimum Thickness range: 0.25mm - 1.50mm (0.010“- 0.060“) Knife Length : 3330mm (131“) for APET 5000mm (197“) for other thermoform. materials Material Roll Diameter :1000mm (39“) maximum Dry Cycles per Minute : 50 maximum Moulds for thermoforming machine GN 1914 DM 1. Cake tin for 15 persons Materials: Dome: OPS glass 600 microns - Base: PET black 425 microns Dimensions: Diameter 235 mm Height 110 mm Unit weight 65 g. 2: Black PP Hot and Cold Food Tray with PET Dome Lid Materials: Tray: Recyclable Black Polypropylene* ; use up to 75°C. Lid: PET Recyclable* ; use up to 65°C. INTERNAL DIMENSIONS: the measurements to be given refer to useful dimensions Tray: L x W Tray: 23,5 X 18 cm L x W Tray: 22 X 16,3 cm Height: 2,8 cm Capacity: 900 cc Weight: 24,4 gr Lid: L x W Lid: 19 X 12 cm L x W Lid: 23,3 X 17,7 cm Height: 2,2 cm Capacity: 575 cc Weight: Weight: 21,6 gr 3. Food container suitable for microwave oven heating Material: Black PP Dome: 100% recyclable PET with anti-fog treatment (Anti-fog). Dimensions: Cavity 1 Cavity 2 Length 117 mm 145 mm Centre width 100 mm 85 mm Height 50 mm 50 mm Capacity: 1,100 cc 550 cc Unit weight: 50 g 4.- Container for cold ready meals and salads Material: PET 70% recycled / 30% virgin (100% recyclable material) Dimensions: Length 225 mm- Centre width 175 mm - Side width 100 mm - Height 55 mm Capacity: 2.500 cc Weight: 53 gr 5.- 6 oz. pastry pot with lid Material: Bi-Oriented Glass Polystyrene (BOPS) Dimensions: Diameter: Outside with lid 9.4 cm Inner rim 7,8 cm Base 4,8 cmHeight 6,6 cm Capacity: With lid: 200 cc (7 oz) / Without lid: 170 cc (6 oz) Unit weight: 7 gr 6.- Pot / Hinged lidMaterial : 500 micron translucent polypropylene Dimensions : Length 11.4 cm (Inside). Width 7,2 cm - Height 7 cmCapacity: 650 cc Weight: 13,2 gr Dimensions: Length 11,4 cm (Inside): Length 11,4 cm (Inside) Width 7,2 cm Height 3 cm Capacity: 280 ccWeight: 13,2 gr 7. 2 cavity heat sealable food tray, suitable for microwave oven use. Material: Heat-sealable polypropylene (PP/PE) Dimensions: Cavity 1 Cavity 2 Length 145 mm 145 mm Width 110 mm 80 mm Height 35 mm 35 mm Capacity: 420 cc 280 cc Unit weight: 26 gr 8. Food Tray - Heat sealable, with gas barrier, suitable for use in microwave ovens. Material : Polypropylene heat sealable barrier (PP/PE, 760/40 mic) (Material approved for food contact in compliance with EU 10/2011 and CFR 21 USA-FDA) Dimensions. Length 19.8 cm - Width 14.7 cm - Height 3.5 cm. Capacity: 1.000 cc Unit weight: 26 gr 9. Container with Lid for Food Material: Container: Polystyrene glass 650 microns Lid: Polystyrene glass 300 microns with anti-fogging Dimensions: Length 19 cm: Length 19 cm. - Width 14 cm - Height 8 cm. Capacity: 2000 cc Unit weight: 41 gr

Max. sheet width: 595 mm Max. unwinder reel diameter: 711 mm.

Max. sheet width: 812 mm Max. unwinder reel diameter: 711 mm. Upstacker GN is available for a separate price Year: 2004 Price on request.

Max. sheet width: 812 mm Max. unwinder reel diameter: 711 mm. Upstacker GN is available for a separate price Year: 2000 Price on request.