Used Metallizer

Web Width Min: 1070 mm Material Thickness CPP- 20- 60 micron , BOPP-12-50 micron, PET- 8-25 micron Max. reel diam. at unwinder: 1000 mm Max. reel diam. at winder: 1000 mm Winder Max & Min. Tention: 60-600 N Pumping system: with no. of pumps: 6 Diffusion pumps : LEYBOLD - 3 Nos. - pumping rate - 20000 l/s Rotary Pumps: LEYBOLD - 2 Nos. - pumping rate - 640 mtr cube/h Root Pumps: LEYBOLD - 2 Nos. - pumping rate - 2005 mtr cube/h Booster Pumps: LEYBOLD - 2 Nos. - pumping rate - 7000 mtr cube/h Chiller system: GWK Unit Polycods: BROOKS - 1 Nos. - working temp. (minus 100 to 150 C) No. Boats: 22 Plasma treater: Yes Evaporation details: 10X35X130 BOAT SIZE Control panel: Siemens

Materials BOPP 10 to 50 um PET 9 to 50 um CPP 20 to 40 um LDPE 25 to 50 um Nylon 12 to 50 um UPVO 20 to100 um PAPER 60 to 100GSM Maximum width 1250 mm Minimum width 625 mm Maximum line speed 840 mt/min Winding specification Maximum winding tension 274 N Minimum winding tension 23 N Maximum drum tension 658 N Roll specification Maximum diameter unwinder 1000 mm Maximum diameter rewinder 1000 mm Core diameter (internal) 152 mm Evaporation Boats : 14 : Size – 150x35x10 MM Pumping Systems 2 x diffusion pumps 17500 L/Sec 2 x rotary pumps 755m3/h 2 x roots pumps 4035m3/h 1 x boosters pumps 9720m3/h 1 x cryogenic panel PFC 1100-HC Coating performance - OD sensor is damage customer is getting coating performance on visually Rate 2.2 O.D. 630 m/min Uniformity +- 5% Chiller specification - (chiller not part of the deal) Cooling medium Water/glycol Minimum temperature -15C Temperature uniformity 1C Standby temperature +20C Reheat time To +20C in 5 min Chiller control - Healing and cooling cycles are automatically controlled for reduced supervision Average power consumption 188 kW Standbypower consumption 70 kW Refurbished Details: - All Thyristor Change In Year 2018. Make : Advance Energy - 1 Booster Pump Change In 2021. Make : Leybold - 1 Root Pump Change In 2021. Make : Leybold - PLC, Drives & Control : Siemens S7 With simoreg drives for the machine and process control, via supervision PC. The evaporation boats are controlled by a separate cabinate with advance energy. (Update new all in year – 2018)

Min. width: 1250 mm core size: 152 mm Substrates: (microns) BOPP: 12-80 PET: 9-50 CPP: 20-40 LDPE: 25-40 NYLON: 12-50 UPVC: 20-80 Vacuum: Evaporation zone operating pressure: 5.0 x 10.4 mbar Pump down time, clean dry and empty: 5.0 x 10.4 mbar in 5 minutes Ultimate pressure: after overnight pumping: < 2 x 10.5 mbar Winding mechanism: Max. winding tension: 600N Min. winding tension: 49N Max. Drum tension: 1291N Evaporation sources: Evaporator source type: Resistance heated intermetallic Number: 26 Evaporator size: 150 x 30 x10 mm Aluminium wire size and purity: 1.6 mm – 99.8 % pure Aluminium wire reel: 6.50 kgs Metallizing Data: Max. deposition rate: 2.2 OD at 630 m/min Capable of 24000m at 2.8 OD @450m/Min Deposition uniformity: +/- 5% Dependent upon material and running speed Plasma treater: Installed

Film Speed: 400 to 600m/min Other specs: Materials and Thickness BOPP: 8 – 80 micron PET: 9 to 50 micron CPP: 20 – 50 micron PAPER: 40 – 80 gsm Maximum width 1650 mm Minimum width 825 mm Winding specification Maximum winding tension: 362 N Minimum winding tension: 30N Maximum drum tension 362 N Roll specification Maximum diameter unwinder 1000 mm Maximum diameter rewinder 1000 mm Core diameter (internal) 152 mm Evaporation Boats : 150mm x 30mm x 10mm Pumping Systems: Quantity and Capacity Evaporation Zone diffusion pumps Varian – 2 nos @ 50,000 ltr / sec rotary pumps Kinney – 1 no @ 505 cu meter / hr roots pumps boosters pumps Arzon @ 3900 cu meter / hr Polycolds – 1 nos PFC 1101 HC @ 200,000 ltr / sec Winding Zone Booster Pump – 1 Arzon @ 390 cu meter / hr, 2 Arzon @ 13000 cu meter / hr Rotary Pump – 2 Kinney @ 505 cu meter / hr Polycold -1 nos PFC1101 HC @ 200,000 ltr / sec Average power consumption 250 kW Standby power consumption 90 kW Refurbished Details: 1) Internal Chiller needs repair. Water from external chillers 2) New indigenous Wire feeding system for stepper motor drives

Min. width: 825 mm core size: 152 mm Substrates: (microns) BOPP: 15-80 PET: 9-50 CPP: 20-40 LDPE: 25-50 NYLON: 12-50 UPVC: 20-80 Vacuum: Evaporation Zone Operating pressure: 5.0 x 10.4 mbar Pump down time, clean dry and empty: 6.0 x 10.4 mbar in 5 minutes Ultimate pressure: after overnight pumping: < 2 x 10.5 mbar Winding mechanism: Max. winding tension: 362N Min. winding tension: 30N Max. Drum tension: 872N Evaporation sources: Evaporator source type: Resistence heated intermetalic Number: 18 Evaporator size: 150 x 30 x10 mm Aluminium wire size and purity: 1.6 mm – 99.8 % pure Aluminium wire reel: 6.50 kgs Metallizing Data: Max. Deposition rate: 2.0 OD at 720 m/min Deposition uniformity: +/- 5% Dependent upon material and running speed