Used NGR 65 VDH of 1999 for sale

1999 | Ref.: 300043046

Single screw repelletizing line NGR, The team at MachinePoint is constantly looking for the best offer of machinery all over the world in order to offer our clients attractive and quality machinery.


Data Sheet of Used NGR 65 VDH

Ref.: 300043046

Year: 1999

Brand: NGR

Status:
For sale

Delivery time: Immediate


Ask for machine price Want to sell your machine?

Technical Specifications:


  • Screw Diameter: 65 mm
  • Output Capacity: 180 kg/h
  • Forced Feeding: Yes
  • Last Material Recycled: PP
  • Suitable Material Form: Film

Other Specifications:


Repeletizing line for trimming material coming from breathable film (diapers), with CaCO3 up to 80%.
Maximum trim width: 140mm
Conveyor belt
Shredder-extruder combination
Vibrating screen

Other Details:


Guarantee: Without guarantee

Current condition: Disconnected. Can't be seen in running condition

Availability: Immediate

Voltage: 56 Kw

Similar Products:


Machines sold in the past:


Recycling machine type E:GRAN 50-12 AP consisting of: 1-Recycling machine type E:GRAN 50-12 The edge strips, endless or pre-cut, are conveyed into the infeed area of the of the machine. The rotating screw in this infeed area picks up the edge strips and conveys them via a compression zone into the extruder. The heart of the machine is the innovative infeed design, which makes it possible to wrap the endless edge trims around the screw core and thus prevents jerky feeding. In the extruder, the material is gently melted and homogenized. Technical data: Screw diameter: 50 mm L/ D ratio: 17 Drive AC frequency control: 18,5 kW AC Heating power: 5,4 kW E-AP50 Hot die face air pelletizing unit E-AP50 Hot die face air pelletizer in stainless steel design. For easy cleaning of the cleaning of the pelletizing chamber, this unit is designed to swivel. Technical data: Pelletizing speed: 100 - 500 rpm Heating capacity: 2 kW Suction/conveying fan: 0,75 kW E-CC50 pellet conveying/cooling system Technical data: Conveying line: 160 mm diameter approx. 6 m conveying length Cyclone: 1 piece including frame 2- RF100 Roller feeder for continuous material. With variable speed and pressure adjustment of the press roll. In order to guarantee a faultless function, the following points must be observed - Max. Cross section (width x thickness of the foil): 60 mm². - Max. Foil width: 1600 mm - Max. Foil thickness: 0,1 mm - Max. Feeding force: 1100 N 3- E-SCS Additional air exchange unit (for output >25kg.) For additional cooling of the granulate, consisting of: Cyclone including rack and intermediate hopper Conveying fan: 0,75 kW Cyclone: 1 piece Conveying length approx.: 10 m Conveying pipe: 160 mm diameter
Recycling line for PE and PP composed by - Conveyor Belt with Metal Detector - Roll Feeder (Maximum receiving capacity 750 kg/h) - Combined dosing unit for additives (granules/powder) - Shredder-Feeder-Extruder Combination Shaft width: 1400mm Feeding screw diameter: 200mm -Double Degassing system -Backwash Filter Changer Filter size in process: 2 x 245 cm 2 (2x38 inches2) Filter Diameter: 176.3mm (6.94 inches) - Pelletizing Unit (Head Cutting-Granulating): - Cyclone silo combination for granules: Die plate for PP and PE
Output of up to 100kg/hour, depending on the type of material and feeding rate Automatic reel feed Cutter-feeder extruder combination Screen Changer Pressure Sensor Pelletising Unit incl. Downstream Equipment Waterbath Cyclone/Silo Combination for Pelletising Selling due to needing a bigger machine Currently recycling LDPE
BOPP film, CPP film fluff, lumps, MDO waste The capacity of the device depends on the properties of the material, e.g. moisture content, printing, weight, melt index, contamination and degree of filtration. Average power consumption: 500 kW Average cooling water demand: 668 l/min Average fresh water consumption: 34 l/h Maximum compressed air consumption: 100 l/min 1. X-CFE Cutter-feeder extruder 2. Conveyor belt incl. metal detector 3. B_SONDER Reel feeder RF 600 DD 4. X-SC180 Screen changer 5. X-HD2000 Pelletizing unit 6. X-ASC Automatic adjustment of speed of pelletizing unit
Machine for in-line processing PE film edge trims 4617 hours of operation. Extruder motor: 18, 5 Kw Extruder speed: 50- 100 U/min Pelletizer speed: 100- 500 u/min Cutting system by rotating blades. The material is cooled by continuous air cyclone

Ask for machine price

Single screw repelletizing line - NGR - 65 VDH - Ref.300043046


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.