NGR recycling machines used for sale


NGR C GRANNGR S GRANNGR P GRANNGR A GRAN











NGR Machines sold in the past:


Recycling machine type E:GRAN 50-12 AP consisting of: 1-Recycling machine type E:GRAN 50-12 The edge strips, endless or pre-cut, are conveyed into the infeed area of the of the machine. The rotating screw in this infeed area picks up the edge strips and conveys them via a compression zone into the extruder. The heart of the machine is the innovative infeed design, which makes it possible to wrap the endless edge trims around the screw core and thus prevents jerky feeding. In the extruder, the material is gently melted and homogenized. Technical data: Screw diameter: 50 mm L/ D ratio: 17 Drive AC frequency control: 18,5 kW AC Heating power: 5,4 kW E-AP50 Hot die face air pelletizing unit E-AP50 Hot die face air pelletizer in stainless steel design. For easy cleaning of the cleaning of the pelletizing chamber, this unit is designed to swivel. Technical data: Pelletizing speed: 100 - 500 rpm Heating capacity: 2 kW Suction/conveying fan: 0,75 kW E-CC50 pellet conveying/cooling system Technical data: Conveying line: 160 mm diameter approx. 6 m conveying length Cyclone: 1 piece including frame 2- RF100 Roller feeder for continuous material. With variable speed and pressure adjustment of the press roll. In order to guarantee a faultless function, the following points must be observed - Max. Cross section (width x thickness of the foil): 60 mm². - Max. Foil width: 1600 mm - Max. Foil thickness: 0,1 mm - Max. Feeding force: 1100 N 3- E-SCS Additional air exchange unit (for output >25kg.) For additional cooling of the granulate, consisting of: Cyclone including rack and intermediate hopper Conveying fan: 0,75 kW Cyclone: 1 piece Conveying length approx.: 10 m Conveying pipe: 160 mm diameter
Recycling line for PE and PP composed by - Conveyor Belt with Metal Detector - Roll Feeder (Maximum receiving capacity 750 kg/h) - Combined dosing unit for additives (granules/powder) - Shredder-Feeder-Extruder Combination Shaft width: 1400mm Feeding screw diameter: 200mm -Double Degassing system -Backwash Filter Changer Filter size in process: 2 x 245 cm 2 (2x38 inches2) Filter Diameter: 176.3mm (6.94 inches) - Pelletizing Unit (Head Cutting-Granulating): - Cyclone silo combination for granules: Die plate for PP and PE
Output of up to 100kg/hour, depending on the type of material and feeding rate Automatic reel feed Cutter-feeder extruder combination Screen Changer Pressure Sensor Pelletising Unit incl. Downstream Equipment Waterbath Cyclone/Silo Combination for Pelletising Selling due to needing a bigger machine Currently recycling LDPE
BOPP film, CPP film fluff, lumps, MDO waste The capacity of the device depends on the properties of the material, e.g. moisture content, printing, weight, melt index, contamination and degree of filtration. Average power consumption: 500 kW Average cooling water demand: 668 l/min Average fresh water consumption: 34 l/h Maximum compressed air consumption: 100 l/min 1. X-CFE Cutter-feeder extruder 2. Conveyor belt incl. metal detector 3. B_SONDER Reel feeder RF 600 DD 4. X-SC180 Screen changer 5. X-HD2000 Pelletizing unit 6. X-ASC Automatic adjustment of speed of pelletizing unit
Machine for in-line processing PE film edge trims 4617 hours of operation. Extruder motor: 18, 5 Kw Extruder speed: 50- 100 U/min Pelletizer speed: 100- 500 u/min Cutting system by rotating blades. The material is cooled by continuous air cyclone

Learn more about NGR and its machinery



  • Foundation and Evolution: NGR, or Next Generation Recyclingmaschinen GmbH, was founded in 1996 in Austria. The company specializes in the manufacture of plastic recycling machines, positioning itself as a leader in innovative and sustainable solutions for plastic recycling. Since its inception, NGR has pioneered the development of advanced recycling technologies, focusing on energy efficiency and waste reduction. Key milestones include the expansion of its global presence in the early 2000s and the introduction of patented technologies that have revolutionized the plastic recycling industry.
  • NGR machines can recycle and produce a variety of plastic products, such as:
  • Recycled plastic pellets
  • High-quality plastic granules
  • Cleaned and processed material ready for new manufacturing processes
  • High-performance recycled materials with enhanced properties
  • NGR incorporates several advanced technologies in its machines:
  • One-Step Technology: Combines shredding, feeding, and extruding into a single compact process, increasing efficiency and reducing energy consumption.
  • Liquid State Polycondensation (LSP): Enhances the properties of PET recycling by re-establishing molecular chains and removing impurities.
  • Integrated Filtration Systems: Ensure high-quality output by removing contaminants from the plastic melt.
  • Energy-Saving Features: Include energy-efficient motors and optimized thermal systems to reduce the environmental impact and operational costs.
  • In the industry, NGR machines are also known as plastic recycling systems, plastic pelletizers, granulators, and plastic waste recovery equipment.
    The price of used NGR (Next Generation Recyclingmaschinen) machines averages around €145,000. This figure reflects the high quality and advanced technology that NGR machines are known for in the recycling industry.
    NGR machines are renowned for their efficiency and reliability in converting plastic waste into high-quality recycled materials. They are designed to handle a wide range of plastic types and forms, making them versatile solutions for various recycling needs.
    The average price of €145,000 for used NGR machines often includes models equipped with advanced features such as high throughput rates, energy-efficient processes, and automation capabilities. These features ensure that the machines deliver consistent performance and optimal recycling outcomes, which are crucial for maintaining productivity and sustainability in recycling operations.

    Do you need advice?


    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.


    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.