Used single screw repelletizing lines for recycling

At MachinePoint we have the greatest selection of used single screw repelletizing line machines for plastic recycling in excellent condition. Check their technical specifications, location and price now. Single screw repelletizing line Erema, Macchi, Ngr, Plasmac, Gamma Meccanica, Periplast, Cdm Engineering, Tecnova, Artec, Polystar, Ming Jilee, Kween B, Munchy, Kbm, Siepla, Reifenhauser, Starlinger, Altech, Prealpina. Buy second hand single screw repelletizing lines in excellent conditions. Used recycling equipment for sale through MachinePoint
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • Machines sold in the past:

    HDPE : 900-1200 Kg/h LDPE/LLDPE : 1000-1300 Kg PP Conveyor belt FB_10000_1200_SH Inner width of the belt : 1150 mm Usable conveyor length : 9900 mm Max. load by conveyor belt : 200 kg Drive power : 1.5 kW Belt speed : 4.7 m/min Weight with metal detector : approx. 2180 kg Process combination I_1714_TVEplus Shredder drive : 315 kW Gate: 0.12 kW Extruder drive : 315 kW Heating capacity zone 1 cylindrical zone (ZZ-1) : 13,2 kW Heating capacity zone 2 cylindrical (ZZ-2) : 8,80 kW Heating capacity zone 3 cylindrical (ZZ-3) : 10,90 kW Heating capacity zone heating zone of plug (VEZ) : 2,70 kW Heating capacity zone 4 cylindrical (ZZ-4) : 15,50 kW Heating capacity zone 5 cylindrical (ZZ-5) : 9,90 kW Heating capacity zone 6 cylindrical (ZZ-6) : 8,80 kW Heating capacity zone 7 cylindrical (ZZ-7) : 8,80 kW Heating capacity adaption zone (AZ-1) : 3,40 kW Cooling pump : 1,10 kW Vacuum pump : 4,30 kW Total weight : approx. 20700 kg Laser filter LF_2_350 Drive : 4,00 kW Heating capacity of laser filter zone 1 (LFZ-1) : 2,70 kW Heating capacity of laser filter zone 2 (LFZ-2) : 4.70 kW Heating capacity of laser filter zone 3 (LFZ-3) : 7.22 kW Heating capacity of laser filter zone 4 (LFZ-4) : 4.30 kW Heating capacity of laser filter zone 5 (LFZ-5) : 5.50 kW Heating capacity - Discharge zone 1 (LFZ-6) : 0,87 kW Cooling fan - Discharge zone 1 (LFZ-6) : 0,36 kW Heating capacity - Discharge zone 2 (LFZ-7) : 0,62 kW Cooling fan - Discharge zone 2 (LFZ-7) : 0,36 kW Max. operating temperature : 300 °C Max. permissible mass pressure : 400 bar Dust extraction SAS_2500 Ventilation capacity : max. 3000 m3/h Drive power : 1,50 kW Weight : approx. 174 kg Service water tank BWB_500_500_S Tank volume : approx. 420 l Drive power of the water pump : 0,25 kW Weight : approx. 155 kg Hot cutting pelletizing head HG_244D Number of pelletizing blades : 4 Revolutions per minute of the knife head (50Hz) : 1420 rpm Drive power of the knife head : 2,20 kW Pelletizing zone heating capacity (GZ-1) : 4,30 kW Max. working temperature : 300 °C Max. permissible melt pressure : 160 bar Granulate dewatering screen GS_2010_1000 Vibrating screen dimensions : 1900 x 700 mm Lump separation : < 20 mm Tank volume : 630 l Drive power of vibrating motors : 2 x 0.30 kW Weight of the water separating screen : approx. 360 kg Condition of the water pump WPS_700 Driving power of the water pump : 5,50 kW Weight: approx. 245 kg Granule centrifugal dryer GZ_1000_M15 Drive power : 15 kW Weight : approx. 616 kg Conveyor blower FG_40 Ventilation capacity : max. 2600 m3/h Drive power : 3,0 kW Weight + soundproofing : approx. 123 kg Vertical Silo & Big Bag station included The entire electrical and mechanical part of the extruder was overhauled and new screws and gears were ordered. The machine is delivered with new rear screw, new intermediate assemblies (sprockets) and renewed front screw. The engine part is delivered with all the engines overhauled and with the bearings changed and the gearbox also overhauled. Invoice and reports of everything can be delivered.
    It is an edge trim extraction + regranulation line. Sell since only used 10hours Output 10-50kg/h Water cooled
    Machine was at Erema Customer Centre till 2022 Run washed LDPE flakes and occasionally clean dry LDPE materials. Operating hours: only 21 973 hours Cutter-compactor motor: 90 kW Equipment : Water pump Heat exchanger Centrifuge Extraction blower Cyclone Vacuum pump Big bag station Degassing water circulating system Agglomerator Dust removal system Spare part: New PCU rotor disc not installed yet ( Price was 10.000,- EUR, will be included with machine)
    3IN1 Single Stage Die-Face Cutting Recycling & Pelletizing Machine with very few working hours Conveyor : 2HP 6000(L)*600(W) Size: Ø1000 mm Motor:75HP Main Extruder Main Power: 125~150HP Temp. Control 8 zone Hydraulic Power: 5HP Double degassing Back flush screen changer Storage Barrel Capacity of 1000L Inludes water chiller
    Complete line for HDPE recycling up to 350 kgh - Single screw extruder KRAUSS MAFFEI KME 1-90-30B - Screen changer - Spaghetti die face - Cutting unit Jiangsu FBP 160 year 2021

    Meet US At

    Interpack26
    Plastpol26
    equiplas26
    FIP26
    Plast26
    PropakAsia26
    InterPlasThailand26

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.