Used PELLENC Mistral+ Film DVI 1200 of 2020 for sale

The sorter processes one tonne per hour. The sorter can be programmed in a variety of ways, including size, colours and type of raw material. With a working width of 1200 mm, the capacity of one tonne is achieved on thin HDPE films. LDPE or PP films, at higher thicknesses a lot more can be achieved. It has only 300 working hours.

Automatic material sorter PELLENC MISTRAL 1200 with metal separator and feeding vibrating table 1. Pellenc M1200 automatic material sorter with metal detector and removal unit for PET bottle recycling industry Machine was produced in December 2007, and it has never been used or installed. Machine is completely NEW!!! Material sorter Condition: NEW - never used Input feed: 1000 kg/h (up to 3500 Kg/h) Belt width: 1200mm Composition of the stream: - approx. 95% PET - approx. 5% PVC, PP, PS, Tetra etc. - other impurities like metal, wood, textile etc. Minimum size of the objects on the detecting belt: 30x30mm Features of the Mistral machines: - 300.000 measurements per second - High quality signal (ratio signal/noise: 20 times superior) - The analysis resolution is 1cm2 - Analysis concentrated on the zones of the spectrum allowing the best recognition of the materials - High precision of synchronisation system of detection/ejection, at the millisecond - Distance between detection and ejection line is only 15cm. This allows a better efficiency of ejection. Material cleaning by negative sorting: machine can be installed before or after the pre- wash in series or as one to sort contaminants (PVC, HDPE, PP, PS, PAN, Tetra etc.) in negative sorting mode (ejecting contaminants). Each stage divides by 10-20 average the amount of contaminants by weight. This configuration is running with one or two stages at industrial scale in regeneration plants before and after pre-wash. Efficiency: guaranteed efficiency minimum 97% on PVC and 95% on other materials. Metal Detector - Metal detector is placed under the conveyor belt before the ejection unit - Metal ejection unit coupled to the Mistral ejection block with high-precision synchronisation between detection and ejection - Detector integrated in the width of the conveyor belt - No magnetic nor electrostatic interferences Performance of the Metal Detector: removal of ferrous metals including stainless steel, non ferrous metals including aluminium, aluminium foils, small metallic objects (nuts, bolts, caps etc) Detection range: - for tetras, steel and aluminium cans: detection up to a height of 80mm from the belt - for seals and rings: up to a height of 40mm from the belt - for springs and bottle necks: up to 20mm from the belt Efficiency: minimum 95% in mass of the metallic objects stream Sensitivity: variable Conveyor - Length 5000mm - Rubber belt, black, anti-grease, smooth, width 1200mm - Electric motor 3kW - Fixed speed between 2.5-2.8m/s - Frame in stainless steel (INOX 304) 2. Vibroprocess SPG 1000x4000, vibrating sorter for any type of material in plastic recycling industry. Can be used in conjunction with Pellenc M1200 as a material sorter and feeder. Capacity 1200kg/h, depending on size and purity of the stream. Machine was produced in 2008, and it has never been used or installed. Machine is completely NEW!!! Spare parts and complete documentation is included