Machine Sold

Used Sorting and separating plant: SESOTEC Varisort CMN 1920 of 2018


Haven’t found the machine you need?

Be the first to know.
We’ll notify you as soon as a machine with these specifications becomes available. In the second-hand market, the best deals go fast.
Subscribe

Similar Products:

Sorting and separating plant - SESOTEC - Varisort CMN 1920

Data Sheet of Used SESOTEC Varisort CMN 1920

Ref.: 300045557

Brand: SESOTEC

Year: 2018


    Other Specifications:

    Input Composition
    PE 950kg/h 95,00 %
    PP 50kg/h 5,00 %
    Total 1000 kg/h 100,00 %

    Number of valves 240
    Valve pitch [mm] 8
    Die diameter [mm] 2.5

    SENSOR UNITS

    Colour C
    Description: CCD line scan camera for detection of different colored material types
    Color detection 2 CCD color line scan cameras
    Resolution up to [mm] 0.7

    Metal (M)
    Description: Metal detection coil for detection of both ferrous and non-ferrous material types
    Metal detection Inductive multi-channel metal detection coil

    NIR (N)
    Description Multispectral camera for detection of different polymers
    Linear resolution 16 (detectable grain size FE: 1 / NE: 1.5)
    Multispectral detection Multispectral camera, 1330 - 1900 nm
    Detection up to [mm] 8

    Suitable particle sizes [mm] 15 - 300
    Throughput up to [t/h]* 6
    Operating voltage [VAC] 400
    Rated current [A] 9-16
    Power [KVA] 6.3 - 11
    Electrical connection Power supply cable 5 x 4 mm²; 3 x 1.5 mm²
    Electrical fuse 25 A (slow blow fuse)
    Protection class IP 54
    Temperature range +5° C - +40° C
    Painting RAL 9007
    Sound pressure amplitude idle < 80dBa, full load <= 90dBa
    Compressed air connection [in] 1 1/2
    Required air pressure [bar] 6-8
    Compressed air consumption [m³/min]** 1-5

    Unit Division
    Separation of the sorting device for parallel sorting of two different material streams or for 2-stage sorting

    Conveyor length
    Conveyor belt with a speed of up to 4 m/s for optimal distribution and separation of the elements in the material stream to increase the throughput

    3rd chute
    Additional 3rd chute and 2nd valve bar for sorting the input material stream into 3 fractions

    Valve grid
    Alternative valve grid possible for certain sorting applications

    Sensor upgrade
    Pre-wiring for possible sensor upgrade

    Stainless steel detection unit
    Multi-channel stainless steel detection coil for detection of stainless steel 30 mm x 30 mm and larger

    VISUTEC data management software
    Networking of the sorter with a PC on which VISUTEC is installed (remote maintenance, software updates)

    Vibratory feeder material flow
    Vibratory feeder complementing the sorter for optimum distribution and separation of the elements.

    Roller apex
    Roller apex on the separator to avoid material accumulation
    Foil chute between conveyor belt and separator housing for separation of light material

    Belt cleaner
    Rotating brush under the conveyor belt for cleaning the belt

    Machines sold in the past:


    Input Composition PE 950kg/h 95,00 % PP 50kg/h 5,00 % Total 1000 kg/h 100,00 % Number of valves 240 Valve pitch [mm] 8 Die diameter [mm] 2.5 SENSOR UNITS Colour C Description: CCD line scan camera for detection of different colored material types Color detection 2 CCD color line scan cameras Resolution up to [mm] 0.7 Metal (M) Description: Metal detection coil for detection of both ferrous and non-ferrous material types Metal detection Inductive multi-channel metal detection coil NIR (N) Description Multispectral camera for detection of different polymers Linear resolution 16 (detectable grain size FE: 1 / NE: 1.5) Multispectral detection Multispectral camera, 1330 - 1900 nm Detection up to [mm] 8 Suitable particle sizes [mm] 15 - 300 Throughput up to [t/h]* 6 Operating voltage [VAC] 400 Rated current [A] 9-16 Power [KVA] 6.3 - 11 Electrical connection Power supply cable 5 x 4 mm²; 3 x 1.5 mm² Electrical fuse 25 A (slow blow fuse) Protection class IP 54 Temperature range +5° C - +40° C Painting RAL 9007 Sound pressure amplitude idle < 80dBa, full load <= 90dBa Compressed air connection [in] 1 1/2 Required air pressure [bar] 6-8 Compressed air consumption [m³/min]** 1-5 Unit Division Separation of the sorting device for parallel sorting of two different material streams or for 2-stage sorting Conveyor length Conveyor belt with a speed of up to 4 m/s for optimal distribution and separation of the elements in the material stream to increase the throughput 3rd chute Additional 3rd chute and 2nd valve bar for sorting the input material stream into 3 fractions Valve grid Alternative valve grid possible for certain sorting applications Sensor upgrade Pre-wiring for possible sensor upgrade Stainless steel detection unit Multi-channel stainless steel detection coil for detection of stainless steel 30 mm x 30 mm and larger VISUTEC data management software Networking of the sorter with a PC on which VISUTEC is installed (remote maintenance, software updates) Vibratory feeder material flow Vibratory feeder complementing the sorter for optimum distribution and separation of the elements. Roller apex Roller apex on the separator to avoid material accumulation Foil chute between conveyor belt and separator housing for separation of light material Belt cleaner Rotating brush under the conveyor belt for cleaning the belt
    Metal separation sorter for PET Flakes with Air Pressure and Metal Sensor (ferrous and non-ferrous) Purchased in 2023 and with only a few hours Working width : 1536mm Number of blowers : 192 Resolution metal: 2 mm Sensor sensitivity metal : for all metals
    Product: PET Trays Size: 50 – 350 [mm] Capacity: up to 2,500 kg/h Product speed: 2,5 m/s Product temperature / moisture content +5 to +40 / < 10 [°C/%] Temperature: +5 to +40 [°C] Working width: 1,920 mm Equipment Specifications: High speed conveyor belt Air storage tank and control unit Housing: mild steel, RAL 9007 painted, covers green painted Metal Detection: Multi-channel-metal detection coil Linear resolution 16 mm Sensitivity: Ferrous ball 1,0 mm Aliminium ball 1,5 mm Polymer Detection: NIR Sensor Resolution 8 mm Rejection system: By means of high speed solenoids Directly mounted for short activation times Valve number (Top and Bottom) 240 Control unit: Industrial PC with touchscreen equipped with: audible and visible alarm display adjustable sensitivity adjustable time delay adjustable rejection time free programmable programs Optimum Operating Conditions: Fed by means of a vibratory feeder Even distribution of the input material Material evenly thinned out VISUTEC Visualization- and Control System including Remote Control All separators can be networked with a PC on which the Visutec data management software is installed. The Visutec software provides an optimal quality control center. Control of process related key figures of: Input materials Final product Input amount Output amount

    Meet US At