Used ILLIG SB74e-4 of 2016 for sale

Automatic roll-fed machine for forming/punching operation Included Vacuum system for sheet entrance which remove the chances contamination Inline grinder with conveying system up to 6m vertical + 20m horizontal distance Product takeout system which has possibility to connect with packing system

Line consists of the next units: Unwinder/ preheater/ Forming and punching machine RDM 70k(2g) / stacker/ trimming unit/ grinder / blower Technical Data RO Unwinder Material roll stand Material width max.::805 mm Material roll diameter max.:1200 mm Material roll weight max.:1200 kg Clamping cone for inside diameter optional: 70 - 95 mm 140 - 165 mm 190 - 215 mm Pneumatic lift-in device Dimensions Length:1630 mm Width:1390 mm Height:980 mm Weight with lift-in device: 346 kg Technical Data Preheater VHW 90/2b Material width on feed side and discharge side max.900 mm Material thickness max, 1.8 mm Connected load of heating rolls 32.4 kW Material draw-off speed max.35 m/min Material draw-off speed min. 1 m/min Heating roll temperature max. Convection heater max. Diameter of heating rolls 600 mm Number of heating rolls 2 piece(s) Material discharge height max.: 1400 mm Material discharge height min.: 1000 mm Weight approx.1200 kg Dimensions: Total length 2100 mm Total length incl. heating tunnel: 2660 mm Total width: 1652 mm Height: 2050 mm Height incl. control cabinet cooling [option]: 2465 mm Technical Data Thermoforming machine RDM 70K Forming area max : Forming part height, negative max./option : 125/150 mm Forming part height, positive max. 15 mm Material width max.730 mm Feed length max.;300 mm Mold closing force max.250 000 N No. of rotations in dry run max. Connected load of upper and lower heating 74.2 kW Total connected load with pneum. plug assist 81.5 kW Total connected load with mech. plug assist 85.4 kW servo-driven plug assist Dimensions of thermoformer: Length with material feed, without stacking device: 3 050 mm Length with roll stand, without stacking device: 5 205 mm Width, with control cabinet: 4 510 mm Height with pneumatic plug assist: 2 620 mm Height with mech. plug assist: 3 280 mm Weight: 5 500 kg Max. cutting length (depending on material) in mm PS-HI 6000 mm PP 5000 mm PETG 4900 mm A PET 4600 mm PVC 5000 mm Includes one Apet cup mold

Thermoforming line with adjustable window plates. Can do twin sheet if needed Currently the machine process semi-finished products up to 8 mm thickness. 10 mm is certainly also possible . All common thermoforming semi-finished products such as ABS, ASA, PE, PP, PVC, PC, PET etc. can be processed. Additional electric heating for tools Format plate min. 990 x 650 Format plate max. 1500 x 1500 Format window plate min. 940 x 600 Format window plate max. 1479 x 1428 Automatic sheet loader installed in 2006 Machine has been overhauled 2 years ago for about 26,000 euros Only approx 31.000 working hours

ROK 550 reel holder, for reels up to 1200mm diameter Max. sheet width: 550mm Max. reel weight: 870kg Unwind speed with servomotor: 1-40m/min Unwind speed in manual mode up to 60m/min Max. sheet feed required by machine: 800mm Length: 1630mm Width: 1230mm Height: 980mm Weight : 360 Kg Forming machine : Forming area min-max: 300x100/500x350mm Tool width between transport chains min/max: 320/520mm Tool length in feed direction min/max: 124/374mm Max. thermoformed part height: 100mm Sheet width min-max: 340-550mm Chain spacing per side max: 15mm Upper heater: 12.6 kW Lower heater: 9.8 kW Upper/lower heater length: 1125-875mm Max. vacuum pump capacity: 40m3/h Max. clamping force: 70 kN Max. forming pressure: 3 bar Compressed air tank: 45 liters Total forming station electrical power: 29.1 kW Max. output: 45 cycles/min Auxiliary cutting : Max. output: 40 cycles/min Max. cutting area: 500x350mm Tool width between conveyor chains max: 520mm Tool length in feed direction max: 374mm Total electrical power of auxiliary cutter: 3.5 kW Max. cutting force: 120 kN Cutting press : Max. asynchronous motor (servomotor) speed: 23 (35) strokes/min. Total electrical power for thread heating: 3.9kW Max. cutting force: 400 kN Total electrical power of cutting press (servomotor): 6.4 (7.1) kW Stacker : Asynchronous motor speed (servomotor) max: 23 (45) strokes/min Max. stacking height: 270mm Stacking station total electrical power (servomotor): 1.2 (1.0) kW 12/12/2023 : 25926 working hours

Forming surface min/max 300x100 mm/ 500x350 mm Sheet width min/max 300/550 mm 22 cycles/min in dry cycle Shaped piece height above/below sheet surface 100/40 mm Cutting force 300 kN Working hours 34178 Overhauled by ILLIG technicians in 2016, including cutting press toggle Cutting press motor replaced 2021 Forming press motors replaced 2016 and 2020 HMI replaced 2022