Used Blister and Skin

Min-max cardboard size: 495x345mm - 770x500mm Film width: 540mm Positive die-cutting depth: 100mm Package height: 100mm Max blister reel diameter: 400mm Max skin reel diameter: 350mm Inner roll diameter: 70mm Max cutting force: 200,000N Cutting length: Max skin cardboard + film: 4500mm Max corrugated cardboard + film: 4000mm Cutting precision: +- 0.5mm Maximum cutting length in the direction of travel: 300 mm Minimum-maximum cutting tool height: 40-100 mm Maximum cutting punches: 8 pieces Heating power: 13 kW Vacuum pump: 40 m3/h Waste winder: maximum diameter 600 mm The machine can also produce blister packs; the control panel offers this option (see published photo). However, this option has never been tested due to a lack of molds.

Card dimension min-max : 450x400 - 770x500 Card weight max : 600 g/m2 Material width : 540mm Height of package : 100-150 mm Number of cycles at 100mm package height : 3 Number of cycles at 150mm package height : 2,5 Weight of product on total card max : 4kg Material roll diameter max : skin : 350mm / Blister 400mm Material thickness min-max : 0.1-0.5mm Material roll core diameter : 70mm Longitudinal cutting blade max : 9 pieces Number of cross cuts which can be carried out : 11 (=10 cavities) Trim-im place tool : 8 pieces Cutting accuracy max in operation direction : +- 0.5mm Heater power rating : 9.0/13.9 kW Vacuum pump : 40 m3/h Total connected load : 15.55 kW Operation pressure : 6 bar Air consumption/cycle : 70-210 litre Compressor suction capacity min : 230 l/min

Machine for skin, blister and standard thermoforming. The machine has : 1 robot for automatic carton placement on the table 1 conveyor belt 1 thermoforming machine 1 trimming block with guillotine puller + punch-die punch holes, longitudinal separation by trimming knots, max 8 pcs. Cardboard format: 450X1200 mm Max reel diameter (blister) : 495 Film thickness : PE film 100 my, PS : 1.5mm & APET PVC 1.2mm Carton weight : 600g/m2 max Cone diameter : 70 mm Actuality : blistering set of shower curtain rods

Dimensions: width 156 cm x height 205 cm x length 620 cm. Molding area: 350 x 500 mm. Automatic unwinding control. Positive and negative molding with cooling table. Individual temperature regulation (15 heating elements). Positive cutting press. Shearing machine. Siemens 611 6SN 1123 -Simodriver automaton. Incorporates interior light in the molding area and at the end of the machine. Cooling water treatment. Few hours of use. For blister: molding and die-cutting of blisters or blister pockets or bubbles. Thickness: from 200 to 1.000 microns.

The BPC23 integrates all the necessary operations for the manufacture of the blister, from the thermoforming from a plastic roll, through the ​​loading of the product, sealing, individual punching of each of the figures and expulsion of the finished blister. Min Forming Area: 150x100mm Deep of draw (lower) : max 60mm Positive forming Thermic Sealing Sealing area: 300x200mm Closing Force: 10t Omron PLC