Used GABLER SWING of 2010 for sale

Working hours per 17.05.2023: 19.524 hours Machine has been used for producing cups, coffee capsules, etc. Can put 2 Rolls on unwinder so can work continuously non stop Gabler 2 model Preheater Pick Up Stacker (can be sold without Stacker check price) Includes mill Getecha RS3009 14120

Complete thermoforming machine SWING pr-va GABLER Thermoform GmbH & Co.,2014 It is designed for manufacturing plastic cups from PP, PS, PET and other thermoforming polymers using a die (forming and cutting together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Main technical characteristics: Forming area , mm Maximum - 450х220 The minimum is 430х180 Maximum width of the tape, mm 480 Maximum thickness of the tape, mm 2 Max. Molding depth, mm 125 Maximum noise level, dB Not more than 80 Idling at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Operating air pressure, bar 8 Includes mould made by Termostampi PP Diam 95 mm, depth from 50 mm to 115 mm The same mould is available for sale.Request a price.

Standard Equipment M98: Forming and Trim in place (punch and die) max drawing depth: 160 mm Forming Station: Main Drive with servo motor Digital drive technique for all servo motors Electrical driven pre-punch adjustment Servo driven plug assist unit for air saving technology 4-columns-guide forming station for a max. clamping force of 650 KN Sheet transport: Computer controlled servo-drive sheet transport Electrically operated sheet transport with spreading Long life chain transport with hardened and cooled guides High performance chain cooling system Heater: 2,7 m long top and bottom ceramic heater with longitudinal heater control, bottom heater partially with cross-row configuration Tool change unit: Fast tool change system with integrated crane In-platen connections for water and forming air supply Forming air supply: 2 forming air tanks directly on top of the forming station (volume: each 90 litres) 2 high performance air valves for quick air supply and ventilation Machine control: Siemens S7 PLC with colour screen for all machine functions and parameters Switch cabinet integrated in the machine guarding Software for automatic pre-setting of production parameters Tool change support menu Cooling: 2-circuit temperature control unit, separate circuits for top tool and ejector Regulation exactness of +/- 1K Optimised tool cooling with max. water flow of max. 120 L/min each Large scale cooling pipes Central Lubrication system Stacking and counting unit: Quick set-up for production change over Servo driven for exact and smooth movements Belt conveyor 5,0 m long to the operator side Special executions of servo plug assist for air saving technology Inline control for inline operation for extruder Extended heater length to 3,6 m 1 additional circuit for temperature control unit (240 l/min), additional cooling circuit for the bottom tool Divided sheet transport with 2 speeds (PP/PS) for lengthwise sheet spreading for flat and even sheet surface in the forming station Pressure difference control of down holder Sheet transport lubrication system Air conditioning for switch cabinet Tele-service via IP- address or modem Tool for M98: Combined forming and punching tool for the production of water cups Round cup with seal-rim; approx. 73,5 mm; PP; approx. foil thickness 0,9 mm; 54 cavities, 6 rows, straight arrangement Cycle rate: 30/ min (with air saving technology) Article output: 97.200/ hour (with air saving technology)

Model: Gabler F 743 + Punching Unit Illig Stal 80 Year 1989 Material: PS, PET Renovations: Heating controlleing unit Forming Table Table motor Forming area: 700 x 250 Film dimension: Film width min 470 ; max 720 Depth of draw positive/negative: 15min, 150mm max mm Nº &type of heaters: ceramic Regulation of heating elements:PSG Machine includes molds Mold closing force:19400 N Feed length:50-X Photo cell sagging control: No Stations : 1 Electrical requirements:3 x 380V 50Hz Power consumption (KW): 101 kW Air consumtion: 7000 L/min bei max Electrical usage:155 A Frequency:50 HZ Drive: Servo, hydraulic, pneumatic Heater power consumtion: Upper heater 50,4 kW max Lower heater 35,7 kW max Stacker: External after Punching unit Stal 80 PLC : SIEMENS ; ELAU Manuals CE Additional Unit (to be negotiated) Packing machine with shrink tunnel 20m Length complete line Dimensions: Gabler: 6800 x 2700 x 2900 Illig Stal 80: 3500 x2800

Machine for lids Forming area max.: 430 x 160 mm Material width max.: 450 mm Material width min.: 350 mm Depth of draw neg.: 6 mm Material thickness max.: 1 mm no. of cycles / min.: 40 Heating capacity: 14,7 kW Total connected load: 24,50 kW