Used Extrusion line for pipes and tubes (unclassified)

Complete used multi-layer pipe (PE-AL-PE) extrusion line from year 2010 suitable for pipes from 10 - 32 mm Including tools for diameter 16mm Technical Data: Water connection 2“ / consumption approx. 10m³/h Air consumtion approx. 20m³/h Connected load 3 x 400V 50Hz +N +PE Fuse 3x 250A / 5x 120mm² CU Operating hours: approx. 15.000 Line speed/size: Size: 16x2mm - 25m/min speed Size 20 x 2,25 mm - 16m/min speed Size: 25 x 2,25 mm - 13m/min speed Size: 32 x 3 mm - 10m/min speed Parts of the line: Item 1) 1 piece Band unwinder Item 2) 1 piece Band buffer Item 3) Pipe forming station Item 4) Welding machine Item 5) Extruder A (inner layer PE) Manufacturer: battenfeld-cincinnati 45-30 D Item 6) Extruder B (glue for inner layer) Manufacturer: battenfeld-cincinnati 30-25 D Item 7) Extruder C (glue for outer layer) Manufacturer: battenfeld-cincinnati 30-25 D Item 8) Extruder D (outer layer PE) Manufacturer: battenfeld-cincinnati 45-30 D Item 9) Gravimetric dosing unit for extruder A & D Manufacturer: Montan Item 10) Extrusion table incl. inner and outer heads Item 11) X-Ray measuring device X-Ray 6070 -Measurement of diameter, wall thickness, ovality and eccentricity Item 12) Cooling section (reprogramming in other languages could offered separately) Item 13) Haul-off AKB 800 Item 17) Central control cabinet Item 18) 1 Conversion set size 16 complete consisting of: - Roller block with bracket unit - Roller forming complete - outer die complete - inner die complete - heating belt - blowing-off die - accessories Item 20) Documentation available Can be shown in production

Complete plant for cable production Extrusion line 60 – Bimar (1989) Extrusion line 100 – Bimar (1990) Air-printing line (1983) Bow stranding machine (1990) Small bow stranding machine (1990) 4 coilers Oven Machines are working with good condition electronics and almost new panels. Regularly serviced as production still being run with them. Dies,drums,tools,pumps,etc included.

Complete used extrusion line for the production of 5 layer PERT pipes -left hand version item 50.1) Extrusion. consists of a main extruder EXTRUDEX for the PERT inner layer and 4 additional secondary extruders for adhesive, EVOH barrier layer and PERT outer layer. The main control system operates the main extruder and the downstream extruder. There is a separate control system for the secondary extruders. All extruders are equipped with Motan material conveyors. Output 160 kg/h Die-head RW525 item 50.2) Vacuum bath + Calibration. incl. calibration tool for nominal diameter 16 mm. Electrical traversing option, height and side adjustable. Length 7m item 50.3) Cooling baths. 2 x 6m Item 50.4) Haul off Extrudex - BA100 Contact length: 1.000mm Belt width: 100mm Pull-off force: 1.000N Pull-off speed: 0 - 60 m/min Item 50.5) Outer diameter and ovality checking device. Zumbach; ODAC 63Trio Item 50.6) Printer. Leibinger Jet 3 Up. incl. adjustable holder at the haul off outlet. Item 50.7) double winder. Graewe. Item 50.8) 1 Documentation in German language (English could be arranged)

Winding pipe Eagle Machinery PSW 3000 HDPE/PP Large-diameter production line The system consists of two extrusion lines: 1) Extruder EAS 90/38 Screw Diameter: 90 mm; L/D 38 Output Capacity: 850 kg/h Co extruder EAS 50/33 Screw Diameter: 50 mm; L/D 33 Winding station WS 3000 Diameter: 300-3000 mm Cooling and milling station MS 3000 Diameter: 300-3000 mm 2) Extruder EAS 90/38 Screw Diameter: 90 mm; L/D 38 Output Capacity: 1000 kg/h Co extruder EAS 50/33 Screw Diameter: 50 mm; L/D 33 Molding machine (corrugator): SWP 110 Diam: 27-110 mm Winding station WS 3000 Diameter: 300-3000 mm Cooling and milling station MS 3000 Diameter: 300-3000 mm For both extrusion parts there is an unloading and pipe finishing part: Dismouting station DS 3000 Diameter: 300-3000 mm Finishing station FS 3000 Diameter: 300-3000 mm Bending machine KLZ 20X50 Available tooling: 500 mm x 2 600 mm x 2 800 mm x 2 1000 mm x 2 1200 mm 1400 mm 2000 mm

Continuous filament winding line. Can produce GRP pipes with the diameters: 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1200, 1400, 1500, 1600, 1800, 2000, 2200, 2400, 2600 mm. The line has laboratory equipment. Original composition of line: 1. Resin mixing section (4 tanks, 2 m3 each). 2. Resin dosing section 2.1 resin pump for the fabrication of the inner layer 2.2 resin pump for the fabrication of a solid layer 2.3 dynamic mixers 2.4 resin dosing units (one for the inner layer and one for the solid layer) 2.5 pipes, valves and filters 3. GPR pipe manufacturing section Pipe lengths: from 4,000 to 12,000 mm. 2 shafts available for the whole range of diameters. 4. Pipe test section 5. Coupling test section 6. Pipe coupling connection section 7. Coupling making section Can make couplings of diameters: from 300 mm to 2600 mm. The length of the couplings: 250 mm. for diameters 300 to 600 mm. 300 mm. for diameters from 700 to 2600 mm. 8. Laboratory section 8.1 Brookfield viscosimeter for incoming resin quality control 8.2 scale with 0,1 g accuracy. 8.3 thermostatic bath for incoming resin quality control 8.4 low temperature oven with auxiliary equipment for incoming/outgoing resin quality control 8.5 oven for pipe composition outgoing control 8.6 stiffness testing device for pipe outgoing control 8.7 Barcol impresser for pipe outgoing ontrol 8.8 split testing device for pipe output control 8.9 scale with 0.1 mg accuracy. 8.9.1 equipment for pipe pressure testing 9. Diesel generator 10. Compressor The photos were taken in 2006 Current condition: see video. The line is not complete. Some parts and tools are missing.