Used MUNCHY machines for sale


Sorry, this item is currently unavailable: Used MUNCHY machines for sale.

Which machine are you interested in?

Request machine »


The most popular used machines: Single screw repelletizing line, Used Recycling Machine

STARLINGER recoSTAR Dynamic 85 C-VAC - MachinePoint

STARLINGER recoSTAR Dynamic 85 C-VAC - 2023

Working hours: 4.383 (setup January 2024)
Fimic Laser Filter – RAS 500 included
Material to be processed :
Film of LDPE, LLDPE and HDPE including agricultural film, MFI (190/2,16)=0,8 - 2g/10min washed post-consumer waste, clean (without PVC and paper, abrasive or metallic contamination), unprinted-slightly printed and up to 100% surface printed, dry (max 5% surface moisture).
Mate...

EREMA Intarema 1310 TVEplus - MachinePoint

EREMA Intarema 1310 TVEplus - 2015

Output: Up to 650 kg/h, depending on the type of material and feeding rate
Conveyor belt FB 7000 1100 SH
Double layer Metal Detector
Intarema Process Combination: I 1310 TVEplus
Control package Intarema
-automatic load detector
-load control cutter/compactor
-palletiser speed control via extruder speed
Touch control panel
Input slider
Extruder vacuum pump
Erema Air...

EREMA Intarema 1309 TVEplus - MachinePoint

EREMA Intarema 1309 TVEplus - 2019

Material : LLDPE, LDPE, HDPE, PP
LDPE screw refurbished
Another screw for PP and die plate for PP are included
Belt conveyor
Double layer all metal detector
Intarema process combination
Extruder motor : 132 kW
Process utility supervision
Erema air flush technology
Trox exhaust unit
Automatic input slider
Powered exhaust system
Water system for vacuum pump
Er...

EREMA 1716 TVE Plus ecoSAVE - MachinePoint

EREMA 1716 TVE Plus ecoSAVE - 2013

The machine is running 24/5 and is well maintained.
Working hours : 16170 (15/10/24)
Complete line consisting of:
Conveyor Belt
Double Layer All Metal Detector
Reel Feeder Device
Erema Air flush Technology + on/off for dosing of CaCo3
Processing Combination PC1716 TVE plus ecoSAVE 200/315 kW
Frequency inverter for variable screw speed + auto screw speed
Touchscreen O...

NGR C:GRAN085-110VSP - MachinePoint

NGR C:GRAN085-110VSP - 2022

Recycling machine for PET (non food grade) and PE
Material Output:
PET / PE printed films (12pm PET + 30pm PE)
Origin:post industrial , Moisture:dry (<1%), Contamination: clean, Surface treatment:
PET Thermoforming flakes, washed post-consumer material with max. 5% residual : 450 -500 kg/h
moisture content : Moisture:< 5 %, Origin: post consumer, Contamination: clean, ...

MUNCHY Machines sold in the past:


Dual feed - Trim and motorised nip rolls for roll feed Max. width : 1500mm 20mu - 150mu Film Air cooled with stand alone cyclone 65 Kgs/h depending on material 55mm conical screw with temperature-controlled zones Pelletising Motor with twin blades Available, end of October
Motorised nip rolls for roll feed Max. width : 2100mm 20mu - 150mu film Air cooled with stand-alone cyclone. 85Kg/h depending on material 75mm conical screw with temperature-controlled zones Pelletising Motor with twin blades Available from October
Roughly for the munchy it runs at 40-50kg an hour. Main Motor : 11kW 8 - 16 Kg/Hr 50mm (2x25) Trim 13 - 25Kg/Hr 80mm (2x40) Trim Pressure Transducers : Dual Type Temperature Controllers : 2 Pressure Instrument : 1
Munchy 40 air cooled recycling system The unit is designed especially to recycle blown film and low bulk density materials. No pre-processing, compacting or heating is required. Its unique design reduces the time the polymer spends in the Extruder thereby reducing thermal degradation to a minimum. The resultant pellet is greater in quality, which enables a higher percentage to be fed back into the production process. Suitable for processing (material): LDPE and HDPE film edge trim, clean, unprinted and dry, free of abrasive and corrosive contamination. Manual screen changer
Materials : HDPE, MDPE,LLDPE, LDPE Output: 40 kg/h Cooling: Air cooling Air range highlights Direct drive operation, AC drive, insizor feed, plug & socket for reduced maintenance Body is watercooled Material comes out and is air-cooled by ventilators The MUNCHER has been designed to be completely versatile so that successful recycling of a wide range of material is achieved: BAGS SACKS PUNCH-OUTS PURGINGS SPRUES TRIMS REELS

Do you need advice?


We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.


First and Last Name *
Please input your name
Contact Phone *
Please input your contact number
Company *
Please input your company name
Email address *
Please input a correct email address
City *
Please input your city
Country *
Please input your Country
Comments *
Please input your comments
To continue you must accept Personal Data Processing Policy.