Used Mounter proofer

DuPont Cyrel Microflex 1320 with Rubber Roller System Two digital, motor controlled cameras indicate plate positions with each having an enlargement factor of 40X Max. nominal plate width 1320 mm Repeat length: 280-1016 mm

Printing width : 100 to 1300mm Printing length : 230mm to 1000mm Cylinder circumference : 230 to 1000mm Cliché : 1.14 and 2.54 mm

The system is based on two co-ordinates that have been applied on the printing plate perpendicular to the print direction. The MOM DD+ has automatic moving cameras, rotation of the sleeves, and is equipped with a vertical cylinder lift Loading/Unloading sleeve approx 60 sec Plate width 100-1300 mm Min. Plate height 80 mm Max sleeve 1300 mm Max repeat 1100 mm7 Diam shaft 98,792 mm Tape holder on slide

Dimensions : 3 000x 1 800 x H : 1 400mm Mounting via macro-perforations of 5mm in the plates. Mechanized raising and lowering of the cylinder, manual rotation and pressing. Manual adjustment of the positioning pins and of the divider position. Machine able to work on carriers up to 2030mm and developments at least up to 1000mm thanks to an adjustable mounting table (See photos with several positions). Currently equipped with a 1270 shaft (presser in 1300mm) of 105.158mm base. Only the shaft has to be changed for a different width or base; if the base is bigger a carrier can be adapted on the existing one. The advantages of this macro-perforation technique are the extreme robustness (no electronics) and the productivity (very fast mounting). Machine from 1994, works perfectly with a preventive mechanical revision in 2016. Layout of the divider published (see picture)

For cylinders, optional sleeve changer Motorized chamber with precision micro-point control Gear construction Driven by a high precision High precision zero backlash harmonic drive Repetition range: 390-980 mm Length: 1290 mm Chuck diameter 114.708 mm Amperage 2A